Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port advanced scheduling implementation from legacy
controller.
This implementation schedules
- non-overlapping scan window when there are simulataneous
central connections active
- central connection establishment with similar connection
intervals be placed in a non-overlapping group, temporally
- connection parameter request with calculated window offset
hints to have non-overlapping BLE radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented an intermediate decrypt buffer to cover the CCM
overrun under CRC error conditions. The workaround is
applicable to nRF52832 SoC only, which is missing the
MAXPACKETSIZE register in the NRF_CCM peripheral.
Fixes#21107 for nRF52832 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing assignment of NRF_CCM->MAXPACKETSIZE register
for PDU sizes smaller than 251 bytes. If there is CRC errors
causing PDU length fields to be higher than configured PDU
buffer sizes in the controller, without the MAXPACKETSIZE
register set to correct PDU size, CCM module could overrun
the PDU buffer and cause memory corruption. This fix is
applicable for all nRF52 Series SoCs except nRF52832 SoC.
Fixes#21107.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing feature exchange procedure does not give the proper
response as specified in the BT core spec 5.0.
The old behaviour is that the feature-response returns the logical and
of the features for both peers.
The behaviour implemented here is that the feature-response returns the
featureset of the peer, except for octet 0 which is the logical and of
the supported features.
Tested by using the bt shell, and having different featuresets
on the 2 peers.
This fixes#25483
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for bluetooth in nRF52820 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
With BT_CTLR_USER_TICKER_ID_RANGE it is possible for vendors to add a
number of ticker nodes for proprietary purposes. The feature depends on
BT_CTLR_USER_EXT.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix local RPA field for the legacy controller. This failed without
compilation errors because of blind pointer cast between two
structs of similar definition.
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a rework for OpenISA SW LL of
"b7220cef86 Bluetooth: controller: split: Fix densely scheduled event
preemption"
Fix LLL implementation handling preemption of currently
active radio event with densely scheduled events in the
pipeline.
Preempt timeout was stopped without consideration to there
being more queued events in the pipeline. Also, added
chaining of preemption timeouts one after the other expiry
so as to preempt currently active events by the densely
scheduled events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"b0826a7f65 Bluetooth: controller: split: Reduce time to setup tIFS
switch"
Refactor to reduce the setup next tIFS switch within tIFS
period of the Radio ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"4547bfb452 Bluetooth: controller: split: handle latency for cancelled
conn events" as well as subsequent fixes
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"62c1e1a52b Bluetooth: controller: split: Fix assert on invalid packet
sequence"
Fix to remove assertion failure check on detecting invalid
packet sequence used by peer central and that no non-empty
packet was transmitted.
Fixes#22967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
When receiving an unknown command send the unknown command response
as a command status event instead of a command complete event.
A command complete event has no status field, although by convention
all command parameters has a status field as the first parameter the
command status event seems like the more fitting option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of privacy on VEGA platform
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
The radio on the VEGA platform will now be able to resolve Resolvable
Private Addresses through the use of the CAUv3 hardware. With this
patch the RPA feature is now fully supported on the Controller:
RPA addresses are generated with local IRK and resolved with
previously exchanged peer IRK.
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The LE Connection Complete HCI event, unlike its Enhanced counterpart,
only uses 0x0 and 0x1 for Peer Address Type. Fix it so that it reflects
the specification correctly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This PR fixes#23482. The preamble size for a 2M phy was incorrect.
There is a bug in calculation of time for the DLE procedure:
the preamble size is incorrect for the 2M phy
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
For the ll code we know the exact entropy device as its the one for the
SoC that we are on. So use the new DT macro's to get the entropy device
via DT_INST rather than using CONFIG_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
