Define the configuration to run the code_relocation
application on the external memory octo flash
of the stm32u585 or stm32h7b3i disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change is aborting the memoryMapped mode of the octo-flash
before erasing or writing the NOR. Operations are performed in
command mode.
Reading is always performed in MemoryMapped mode (memcopy)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable the MemoryMapped Mode for the stm32 octoFlash driver
Configure the Flash in MemoryMapped to use in XiP mode.
With this mode the erase and write are not supported.
Address and size are given by the DTS register property.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pin thread to a specific cpu. Once thread gets cpu, check
the cpu id is correct and then thread will give up cpu.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Adds useful context to the charger sample README to help readers
understand what the sample application is doing.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds some introductory context to the charger documentation. This
is being aided to help developers understand what a charger device
is and how the charger_driver_api is relevant to system operation.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Create a pseudo-terminal to access Zephyr shell on the audio DSP.
The shell terminal is enabled with "-p" command-line option.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Add a new shell backend implemented over a shared memory window
on the Intel audio DSPs. The implementation uses the Zephyr winstream
to manage the data streaming.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This duplicates the functionality of device_is_ready.
Calls for z_device_is_ready are being done in kernel mode, so it is
safe to call its implementation directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactored vendor-specific duplicates of uart tx/rx invert properties
into a common dts file uart-controller-pin-inversion.yaml
Signed-off-by: Anuj Pathak <anuj@croxel.com>
This commit has added new flag FS_O_TRUNC to support truncation
during file open. Modified fs_open to handle truncation based on
provided flags. Included unit tests for flag behavior with common
filesystems.
Signed-off-by: RAJAGOPALAN GANGADHARAN <g.raju2000@gmail.com>
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for tests/crypto/mbedtls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This WDT is responsible for monitoring the external
32.728 Hz crystal connected to pins XTAL_32K_P and
XTAL_32K_N. If an oscillation failure is detected
the hardware automatically switch to RTC_RC_SLOW
clock source and triggers an interrupt.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Employs the same linkonce magic of sw_isr_table to fix the
multiple definition of the symtab variables issue that I
get in my application build that doesn't use `west`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`start_addr` is the address of the first symbol, rename it to
`first_addr` instead as it seems more intuitive and relatable
to the comments.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Append new entry to the symtab list only if it has unique
address.
Added a bit more comments and move the debug print to after
the list is sorted.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The `symtab_find_symbol_name()` is using an adapted binary
search function to get the entry between 2 addresses, we need
to add a dummy entry at the end so that the search function
can remain simple and straightforward without doing
out-of-bound checks:
20 \
|
|
50 x
|
|
90 x
. |
. |
. |
dummy /
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update dts to use ST7735R via MIPI DBI API.
Also, remove the reset-gpios, as on this board the LCD RESET pin is
directly connected to the system reset. And add LCD backlight pin
connected to PE10.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
This commit should fix the followings:
1. Suppress compiler warnings
2. Cryptographic mode should first be exercised before
applying the secure key
3. In-memory word swap operations should be omitted as
the key should reside in the flash memory and so any
write access should raise a busfault exception
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Random number generator is a subsystem and although it is mostly used
in crypto, this is not its only utility.
Move the current random number generator test to it is own space
(tests/subsys/random) and rename it to rng.
We need more and better tests for rng, this is an initial commit
to organize it and get ready for further tests.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
