Putting a space between and the PR number causes the rendered
text to not link to the issue.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note (all of them)
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The BT subsystem has not been officially qualified for a somewhat long
time now. The code has diverged quite a bit from what it was.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In preparation of further cleanup commits.
Removes noise in the navigation pane in the rendered docs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
A Kconfig item is added and the buffer
is embedded into the modem_cmux struct.
The default value is increased from 16 to 64 bytes in
an effort to reduce the number of modem_pipe_receive() calls.
CONFIG_MODEM_CHAT_LOG_BUFFER is renamed
to CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE for consistency.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The virtual interface API "input" callback is removed and
its functionality is implemented in "recv" callback.
This change affected the IP tunneling implementation in the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Mark pthread_rwlockattr_setpshared() and
pthread_rwlockattr_getpshared() as supported in the POSIX
Options documentation.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add documentation on relevant sections to list addition of Bluetooth LE
service NUS (Nordic UART Service), as well as the UART driver for UART
over Bluetooth LE and snippets to easily enable it.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Mark the POSIX_SINGLE_PROCESS Option Group as supported
in PSE51, PSE52, and PSE53 Application Environment
Profiles.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The `_POSIX_CPUTIME` interface requires
`CLOCK_PROCESS_CPUTIME_ID` and `clock_getcpuclockid()` to be
present. Both of those are now available and therefore we can
mark `_POSIX_CPUTIME` as supported for PSE53.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
As we are replacing native_posix with native_sim, let's
use native_sim instead of native_posix as example platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a terminology section to the board porting guide.
This provides a single location where terminologies used for boards can
be found and linked to.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixes a typo found by @bryceschober
Spell-checked the rest of the document and found no issues.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
This commit adds a tutorial on how to set up, build, and debug
a sample Zephyr application in CLion.
Signed-off-by: Marina Kalashina <marina.kalashina@jetbrains.com>
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A new extension, api_overview.py, is used to, leveraging doxygen's
Python module doxmlparser, parse the doxygen generated XML files.
All groups ('defgroup' and 'addtogroup' tags) are collected, alongside
their 'version' and 'since' info.
From there, a new Sphinx directive `api-overview-table` is populated,
including the name of the group, and if available, their 'since' and
'version' information.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It will be necessary to parse the doxygen XML files to extract `since`
and `version` from them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Based on information from doc/develop/api/overview.rst, add current
version for some groups representing APIs, following the following
table:
- Experimental: 0.1.0
- Unstable: 0.8.0
- Stable: 1.0.0
Also based on doc/develop/api/overview.rst, add 'since' tag to the
groups.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a note about the ``sample-point`` and ``sample-point-data`` CAN
devicetree properties now being optional.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Mark `sched_setparam()` , `sched_setscheduler()`
and `sched_rr_get_interval()`
have implemented but will fail with ``ENOSYS``
Were missing on the documentation before.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Mark `putmsg()` as implemented but will fail with ``ENOSYS``
Was missing on the documentation before.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Replace uses of native_[posix,sim]_64 in the documentation
and kconfig help messages with native_[posix,sim]/native/64
to match the hwmv2 naming.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add new commands to manage the Encrypted Advertising Data feature.
Overview of those new commands:
- `bt encrypted-ad set-keys`: set key materials (session key and
initialisation vector) used for encrypted and decryption of EAD;
- `bt encrypted-ad add-ad`: store a given advertising data structure;
- `bt encrypted-ad add-ead`: encrypt the given advertising data
structres and store the generated AD structure;
- `bt encrypted-ad commit-ad`: set the AD of the selected advertiser
with the stored AD;
- `bt encrypted-ad clear-ad`: remove all stored AD;
- `bt encrypted-ad decrypt-scan`: decrypt data using the previously set
key materials when receiving AD with type `0x31`.
The documentation of the Bluetooth Shell has been updated to include
those new commands.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
For breaking API changes, let's mention explicity the PR should
be labelled with the "Architecture Review" label, as that is
the one we base the automation on.
As otherwise it is not clear enough for developers that they
should add it, and without it (and the automation surrounding it),
it is too easy for a PR to be merged by mistake.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Modified bitmask to bitmask array, it can make multilevel queue remove
32 bit prioriry limit.
We can scan bitmask array to find which queue have ready thread.
Only need the number of queues as priority because the priority
is checked on create_thread.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Add release notes related to the added support for minimum supported CAN
transceiver/controller bitrates.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
`getmsg()` and `getpmsg()` are now implemented, mark it so.
There are place holder so will fail with ENOSYS.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Codecs can be printed at different levels:
level 0: Generic and unicast
level 1: subgroup codec configs
level 2: BIS codec configs
This commit ensures that the indentation level
is correctly increase based on where the codec configuration
data is printed.
This also updates the documentation for the BAP shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move away from os.join.path and only rely on pathlib magic, and serialize
all paths using POSIX path separators.
This fixes documentation build and compliance check script on Windows.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Commit adds description of the Large Composition Data
client's shell commands into documentation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Due to the source/header files are moved to subfolder "classic",
rename the kconfig option BT_BREDR to BT_CLASSIC to make the
folder name and kconfig option name consistent.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
