Shell log backend depends on logging being enabled. Lack of this
dependency leads to compilation failure when logging is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The commit adds Kconfig option to configure dummy shell buffer size.
Size of this buffer determines how mutch of command output will be
stored in buffer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Allow time for the shell to successfully echo the reboot command input
before the reboot abruptly terminates it. n This can help external
systems that interact with the shell and require the reboot command's
echo to successfully complete to synchronise with the device.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/35325
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
When shell log backend was disabled fifo used only in
deferred mode was unconditionally flushed which lead to
errors in immediate mode where fifo was not present. On
the other hand, in case of LOG2_MODE_DEFERRED fifo (mpsc_pbuf)
was initialized in enable stage.
In order to clean things up, deferred v1 fifo flushing and
deferred v2 mpsc pbuf initialization were moved to fifo_reset
function which is called when shell log backend is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit increases the shell stack sizes when used with
OpenThread shell and the joiner to compensate for enlarged
MPU stack guard.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When shell had too many pending log messages it was attempting to
drop expired messages and retrying to put the new message. There
was an assumption that enough messages are dropped and new message
can be put. It may not be the case if no message expired during
given time. Wrapped the operation in loop to continue until expired
message is freed and new message is enqueued.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If the telnet client operates in a character mode, it may send
individual characters in packets. Such packets were dropped in the
telnet shell backend instead of being process by the shell engine.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace k_work_cancel_delayable() with k_work_cancel_delayable_sync()
to make sure that the submitted work becomes idle before accessing
sensitive data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Init function can be called multiple times (after each shell
reinitialization). It was missing reseting ring buffers and tx_busy
flag. When called once proper state of those variable where handled
by ram sections initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building this file with CONFIG_COVERAGE=y and CONFIG_SHELL_LOG_BACKEND=n
fails on the llvm-clang compiler. Swapping the IS_ENABLED and
log_backend allows the compiler to optimize out the if block even with
coverage enabled.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Sometimes it is hard to tell which instance of a thread is which
in the printed list, based solely on the name (if present) and
the k_thread pointer, so also print the thread entry fn pointer.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
If a shell command is compiled out using SHELL_COND_CMD(),
a line for this command will still be printed but will
be blank. Change it so compiled out commands are not
listed as blank lines.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell will not "steal" by default "-h" and "--help" each time
help functions are enabled.
This change is necessary to implement and use the getopt library.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
This makes cbprintf_nano.c much closer to the standard printf and
therefore more useful. The following are now implemented:
- right justification for everything (only for numbers previously)
- precision value for numbers, chars and strings
- width/precision passed as arguments with *
- "unlimited" padding length
- lower/uppercase hex output
- the #, + and ' ' flags are supported
And the code was heavily reworked to reduce its size as much as
possible to mitigate the size growth. Still, the binary resulting
from cbprintf_nano.c is now between 10% and 20% bigger depending on
the architecture. This is still far smaller than cbprintf_complete.c
which remains about twice as big on average even without FP support.
Many unit tests that were skipped with CONFIG_CBPRINTF_NANO are now
enabled, and a few more were added for good measure.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The ASSERT order is backwards, where the shell->ctx is being accessed
before it is being checked as valid. Moving the check for the
shell->ctx to before the using it.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
Fix the order so that it reflects the actual initialization order,
rather than putting PRE_KERNEL initializations after APPLICATION.
Add SMP in the proper location.
Use the helper function to provide unique identifiers for "devices"
that don't have a device pointer (so don't have a name).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Function shell_root_cmd_find was only used in shell_utils.c file.
Hence it is changed to static and renamed to root_cmd_find.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
