The following fixes were applied:
- Multicast Rx packets stats were not recorded due not parsing the
ethernet header. The function that tried to parse the ethernet header
was parsing the ethernet packet beyond the ethernet header.
- Added a new stats for unknown protocol which gets updated when the
ethernet layer encounters an unknown ethernet packet type.
Fixes#53994
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Rework the implementation of `pm_device_children_action_run` to use the
common `device_supported_foreach` iterator.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
To write tests it is necessary to offer init function for the RDClient
to define custom fakes before.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
This reverts commit 5824ac90ecd8dd06d9ea117d345dbc6b069e5840.
The resulting revert takes into account changes to the predicate that
guards the use of `resp_addr`.
In the resulting revert, the predicate guarding the use of `resp_addr`
is differs from the naive revert because the intention of that predicate
is to know when `conn.c:bt_conn_le_create` decided to use the Host
resolver. And, the logic in `conn.c:bt_conn_le_create` has changed. The
changes to the logic in `conn.c` are in the following commits:
89780d715d5a09325ba9
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Fix filter accept list and privacy feature Kconfig default
based on whether host has them enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change the http timeout mechanism to use poll instead of shutdown.
This should fix a problem where the shutdown will be called in a
different thread context which can lead to deadlocks on certain
driver implementations like offloaded modem drivers.
Fixes#53967
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
When removing a CIG, the instance and associated CIS instances were not
always released. This causes repeated Create_CIG/Remove_CIG operations
to fail assertion with resource error.
Enables CONFIG_BT_CTLR_CENTRAL_ISO in bsim_test_audio.
Fixes issue #53301.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Similar to the ad_init that automatically adds advertising data
from other modules, pa_ad_init has been added to do the same
for periodic advertising.
The only use case so far is the BAP broadcast source
data, if enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The call to audio_ad_data_add will now either call
connectable_ad_data_add for connectable advertising, or
unconnectable_ad_data_add for unconnectbale advertising.
Most service UUIDs etc. does not make sense to advertise if
not connectable.
This also adds the BAP broadcast advertising data to
unconnectable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the advertising is connectable, and we have privacy,
then according to the HAP spec, we should not advertise
the HAS uuid.
This was done by simply truncating the advertising data, but
it was only truncated by 1, instead of by the size of the
UUID.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
New LLCP will process the CIS establishement in the TX path, meaning it
will only process once every ACL connection interval.
If ACL connection interval is significantly longer than the ISO
interval, CIS packets corresponding to the ACL connection interval will
be lost. This may cause latency in audio rendition.
By processing the CIS establishment in the RX path, notification will be
sent immediately, and audio path is enabled fast to reduce latency.
When a CIS fails to establish, the controller shall complete the
procedure by sending a CIS_ESTABLISHED event containing the error.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Disconnect CIS immediately if event done extra status indicates MIC
failure. Return reason BT_HCI_ERR_TERM_DUE_TO_MIC_FAIL.
Fixes EBQ test /LL/CIS/PER/BV-27-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the 'instant' of a CIS is postponed by increasing the conn_event of
the CIS_RSP compared to CIS_REQ, the CIS offset shall be calculated as
an equivalent window offset by an integer number of ISO intervals.
This is obtained by increasing the CIS_Offset_Min and CIS_Offset_Max by
the modulus of the connection interval delay time.
Signed-off-by: Morten Priess <mtpr@oticon.com>
To be able to timely start the first CIS/CIG, if the requested instant
is the next connection event, call ull_peripheral_iso_start directly
from rp_cc_state_wait_rx_cis_ind instead of waiting for next time
through the state machine.
To enable ULL/LLL to prevent adding latency when LLCP is waiting for
instant, local- and remote procedures with instant now expose a function
for checking this state.
Fixed event_counter function to prevent one-off in RX path. Unified to
use single function ull_conn_event_counter.
Fixed LLCP unit tests and added new mock function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
USB stack did leak memory on every SET ADDRESS request. UDC control
allocator could cope with up to 13 leaked allocations. Therefore,
issuing bus reset 13 times in a row (in addition to automatic reset
after connecting the USB cable) was enough to exhaust memory and
thus drive USB stack inoperable.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The sink ASE does not have a disabling state, but since the
stream callbacks does not necessarily match the ASE states,
we need to do our own check to see if a sink ASE has been
disabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Before this commit we simply always notified/indicated
all presets and active index to any bonded device, even
if they never subscribed to anything, or even if we never
registered HAS.
This commit modifies that, so that only the proper
connected clients will get the notifications/indications,
and that we only send them if something has changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The security_changed callback may be called before
bt_has_register has been called, thus making the active_preset_work
handler uninitailized, causing an ASSERT when the work is submitted
in the security changed callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Calling bt_has_register multiple times would cause attempts
to register a HAS multiple times. Fixed by adding a check
and return with EALREADY if it is already registered.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The POSIX spec requires that `SO_LINGER`, `SO_RCVLOWAT`,
and `SO_SNDLOWAT`, and `SOMAXCONN` are defined in
`<sys/socket.h>`. However, most of the existing socket
options and related constants are defined in
`<zephyr/net/socket.h>`.
For now, we'll co-locate them. It would be
good to properly namespace things.
Additionally, a no-op for setsockopt for `SO_LINGER` to
make things Just Work (TM) for now.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add check preventing Out of band access. There are tests trying to
access out of band handle like:
test_sink_invalid_ref and test_source_invalid_ref trying to access
handle 99.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The updatehub shell cmd_info allocate memory but not checks function
return. This add missing checks and proper error handle.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The current updatehub version forces user application to run in kernel
mode. This add necessary api syscalls to isolate userspace from kernel.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support for configuring power save timeout in Wi-Fi chipsets.
Changes to configure power save inactivity timer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
z_cpus_active count becomes incorrect when the state is
PM_STATE_RUNTIME_IDLE and CONFIG_PM_DEVICE is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This service allows to synchronize the clock with the application
server.
Synchronization requests are initiated by the device in a regular
interval, configurable via Kconfig.
The implementation only supports TS003-2.0.0, as the previous revision
TS003-1.0.0 requested to temporarily disable ADR and and set nb_trans
to 1. This causes issues on the server side and is not recommended
anymore.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is a prepartion for adding actual services needed for firmware
upgrade over the air (FUOTA).
The services run in a dedicated work queue.
This commit introduces code that initializes the work queue and
provides functions to schedule uplink messages after a given timeout.
Signed-off-by: Martin Jäger <martin@libre.solar>
This commit changes VOCS set location behavior.
When an RFU location is written, VOCS ignores it.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Use the maximum data PDU size time reservation space
considering the Data length could be updated from default
27 bytes to maximum support size.
If maximum time reservation is disabled then time space
reservation corresponding to the default data length at the
time of the start/enable of Central role is used.
Note, currently this value is only used to space multiple central
connections and not for actual ticker time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection parameter request procedure to be cacheable
if a remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy control procedure implementation to avoid
connection update procedure with reason instant passed
(0x28).
Connection Update Indication PDU is enqueued after data
enqueue to LLL context is paused and the enqueue resumes
when already enqueued data PDUs are all acknowledged.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the init command for teh CSIP Set Coordinator.
The main reason for this is that we want to ensure that we
register the conn callbacks early so that `conns` array is
properly filled.
The other callbacks registered in the init function
can easily be moved to where they are needed, and even
unregistered to avoid parsing more data than we need.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
During the NVS initialization, if gc had to be done, the NVS cache
rebuild wasn't called.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
While porting the coverage.c file from RIOT to Zephyr, which employs
different compiler flags, I noticed several -Wcast-align GCC warnings on
arm. I think, as is, the current implementation may perform unaligned
memory accesses which may not be supported on certain platforms. To
workaround that, I have rewritten the code for RIOT using
bytewise-writes with `memcpy`.
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Full resource names aren't as long as combined basename- and name-buffer
sizes but the compiler doesn't know it. Increasing the buffer size to
avoid the compiler warning.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
