This commit fixes#73337.
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for net.socket.register.tls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The test needs couple of more socket/file descriptors to work because
CONFIG_POSIX_API creates three more file descriptors namely the
stdin, stdout and stderr descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The compilation was failing if IPv4 was disabled.
Also fix the IPv6 test so that they pass properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The ztest stack was to low to execute tests on some platforms (spotted
on nrf52840dk/nrf52840), hence increase it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The values set as a min_ram requirement were far from the actual RAM
usage reported during build, make them more realistic.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add tests verifying valid IPv6 ND behaviors on interface state changes,
specifically:
* Verify RS is sent, and upon RA reception prefix and autoconf address
added accordingly.
* DAD is triggered for autoconf, static and LL IPv6 addresses.
* IPv6 address is not used upon DAD conflict.
* IPv6 neighbor discovery works as expected.
* Multicast transmission/reception is functional after interface state
changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
One of the test interfaces is defined as Ethernet interface, however it
was missing ethernet_init() call, hence for example interface flags were
uninitialized. This can cause issues with multicast tests, as
NET_L2_MULTICAST flag was missing on the interface.
Additionally, Ethernet-type interfaces should use struct
ethernet_context as a base for their context data, otherwise Ethernet L2
will reach to some rubbish memory locations.
Finally, since the interface now defines correct flags, all-nodes
multicast address is now added to the interface automatically as a part
of ND logic. Therefore, skip adding that address manually from
ipv6_setup().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Restore the original LL address on the interface after tests, instead of
generating a new one, to avoid dangling link-local IPv6 on the
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add more test cases verifying that MLD events/reports are sent
accordingly when interface state changes.
Introduce separate semaphores for waiting for network events, as having
a single one for transmit and events is ambiguous in tests.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A support for RDNSS option should not force DNS subsystem being enabled
in the system, especially that the option is enabled by default. It
should work the other way around - the option is supported only if DNS
was enabled by the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The native_posix board does not work well with eventfd so disable
it with tests that use socket service API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The LOG_MODULE_REGISTER() was not called anywhere so if one tried
to enable logging, there was a linker error about missing logger
functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the mDNS responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the DNS resolver is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to 'man 7 socket' about SO_PRIORITY:
Setting a priority outside the range 0 to 6 requires the CAP_NET_ADMIN
capability.
So use 6 instead of 8, in order to make UDP socket tests pass with native
offloaded sockets on native_sim platform.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The test suite assigns LL address to the interface manually, hence need
to reapply it whenever interface goes up.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few tests involving TCP were missing TCP teardown delay. Adding these
improves tests stability when testing in a loop for longer periods (i.
e. with CONFIG_ZTEST_SHUFFLE enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to recent changes, as simple k_yield() is not enough on some
platforms (nRF platforms for example), as the entropy subsystem is now
used because of PE, which may block, causing context switch before
entire RA message is processed.
Fix this by adding small delay before checking if RA was processed
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove dependency on netif for net.tls_credentials.trusted_tfm
in order to have the test fully built and executed in at least
1 platform (i.e. mps2/an521/cpu0/ns)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
There needs to be at least one network interface in order
to avoid this error.
E: There is no network interface to work with!
So enable loopback support which creates a loopback interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure the IPv6 source address selection works as expected
when using the IPV6_ADDR_PREFERENCES socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit introduces a new test case for veryfing that addition and
deletion of multicast routing entries emit MLDv2 reports when needed
and if multicast routing entries are appended to MLDv2 records properly.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
One should not call a function directly from within zassert()
as it can cause the value of errno to be lost as seen by this
failed test output
Assertion failed at tests/net/socket/reuseaddr_reuseport/src/main.c:151:
test_bind_success: (zsock_bind(sock, addr, addrlen) not equal to 0)
bind() failed with error 0
FAIL - test_ipv4_udp_bad_both_not_set in 0.000 seconds
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix the failures introduced in #72078 by manually enabling all the
hash algorithms as they used to be.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Tests for HTTP server support.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We were missing a helper function that can be used to check
whether the given function is the virtual VLAN interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds a config that enables sending the object version for all objects.
According to LwM2M specification v1.0 and v1.1, non-core object versions
other than 1.0 'must' be provided, while all other versions 'may' be
provided. With specification v1.2, a client 'can always attach Object
Version Information'. Or in other words, it is OK to always report the
object version with all specifications.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
1. Correct node label in k64 overlay for ptp test
- Not sure if this actually matters since it appears
that actual hardware is no longer tested in net tests
2. Include fsl_enet with <> instead of "".
3. Build the ptp clock driver only if the ethernet driver is built
- Technically I think the 1588 timer should be able to be used
even if the ethernet mac is not used, but I would imagine this
to be an extraordinarily rare, weird, and niche use case, so to fix
the current CI error caused by net test disabling ethernet drivers,
couple the ptp clock driver to the ethernet driver in the build
configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Updates the linker script fragments under 'tests' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
This commit adds a test for veryfing new functionality of storing
mutliple interfaces per single multicast routing entry.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
So far test cases in TCP test suite were represented by magic numbers.
With the increasing size of this test suite, it started to become
troublesome to follow, which number represents which test case or what
number can a new test case get.
Introduce a new enum for the test suite, which can be used to represent
individual test case. It simplifies adding new test cases (test case ids
are now defined in a single place, so easier to extend), and also
improves code readability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify, that when TCP stack received FIN packet containing data bytes,
the data is provided to the application and respective seq/ack counters
are updated respectively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This commit fixes 'test_verify_send_report()' function as it was
not properly waiting for a MLDv2 report after sending a query. The
asserted value was set for the previous report sent after joining a
group.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
