As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When a memory domain is initialized, the z_libc_partition must be
included so that critical libc-related data can be accessed.
On ARM processors without TPIDRURO when THREAD_LOCAL_STORAGE is enabled,
this includes the TLS base pointer, which is used for several
thread-local variables in the kernel.
Signed-off-by: Keith Packard <keithp@keithp.com>
When active, z_libc_partition consumes an MPU region which leaves too
few for some MPU tests. Free up one by disabling HW stack protection.
Signed-off-by: Keith Packard <keithp@keithp.com>
Print whether or not the code is actually in usermode.
Fail the execution with an assertion if not the case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove the only_tags filter for the board and add ignore_tags for net
and bt.
Adds a filter to a userspace sample that didn't correctly filter on
usermode being Kconfiged.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The syscall_perf test cannot be built successfully due to region RAM
overflow on qemu_riscv32_xip and hifive1_revb. The dtim is only 16KB,
To reduce the main stack size to make it can be built successfully.
Base on the spec(fe310-g002-manual-v1p1.pdf), the size of itim should
be 8KB. Modify the definition in its DTS file.
And it also fix some of the gcc warning when testing it by twister.
This PR partially fixes#41399.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Normally main.c file doesn't have a header file, because it doesn't
need to declare any interfaces to other modules.
In this sample, it's better to put the shared variables in one place,
and provide the interfaces to other modules, such as app_a, app_b,
and main.
Signed-off-by: Paul He <pawpawhe@gmail.com>
This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes k_mem_domain_init() to return error values
instead of asserting when errors are encountered.
This gives applications a chance to recover if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert remaining tests and samples to using find_package() instead of
literally including the CMake boilerplate code.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
With demand paging, the main stack is not user mode capable
and it would fail k_thread_user_mode_enter() under
app_b_entry(). So create another thread and stack for app_b
as this stack can be used in user mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Convert samples to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This code used a sys_mem_pool directly. Use a new-style heap instead
to do the same thing.
(Note that the usage is a little specious -- it allocates from the
heap but doesn't appear to fill or check any data therein, just that
the heap memory can be copied from the two memory domains. It's
unclear exactly what this is trying to demonstrate and we might want
to improve the sample to do something less trivial.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The k_mem_pool allocator is no more, and the z_mem_pool compatibility
API is going away. The internal allocator should be a k_heap always.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The goal of this sample application is to measure the performance loss
when a user thread has to go through a system call compared to a
supervisor thread that calls the function directly.
Signed-off-by: Nicolas Royer <nroyer@baylibre.com>
re-enabling this test was premature, it still crashes very often
due to two known issues affecting x86 64-bit. Filter out for
every 64-bit x86 platform until those bugs are solved, which
will reduce CI failure noise.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Saves quite a bit of memory on MMU-based systems which manage
page tables at the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory domains can be very expensive to instantiate. Demonstrate
how the default memory domain can be re-purposed for an
application, much like how the main thread already is.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This change removes the hardcoded subsystem list in gen_kobject_list.py
favor of marking the relevant driver API structs with the _subsystem
sentinel.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This test uses bare variables to synchronize state between threads,
but had forgotten volatile qualifiers on all the data. So the
compiler was free to reorder and make assumptions that aren't valid
when the values are being written from other CPUs.
Single-cpu operation was fine because the code would always hit an
external function call like k_sleep() that would force it to re-read
from memory every time there was a context switch (timeslicing isn't
enabled on this test and the threads are cooperative), but on SMP the
volatiles can change at any time and we could see spurious state
mixups and hangs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This sample keeps failing in CI due to some SMP issues currently being
addressed. Exclude until we have a fix.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable CONFIG_TEST so that we get the necessary defines for
console output when a fatal error happens, as well as assertion
checking.
Remove an unnecessary self-abort in main(), this causes an
assert to fail. Letting main() return does the same thing, more
gracefully.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There was some unlocked initialization code in the "enc" thread that
would race with the "pt" and "ct" threads if another CPU was available
to run them (it was safe on UP because "enc" entered the queue first
and was cooperative, the others wouldn't run until it blocked).
Move it to main() and remove the enc_state guard variable which is no
longer doing anything.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
