Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Add CONFIG_USBC_CSM_SINK_ONLY=y to Sink's sample prj.conf.
This selects the Sink only Connection state machine
for the Sink sample and it explicitly show the user
of the Sink sample how the connection state machines are
selected.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Due to some previous time-related header issues, we included
`<sys/time.h>` without including `<time.h>`. The latter is
necessary for `time()` (specified by both ISO C and POSIX).
Fixes#53673
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Instead prefer to add the tag to ignored tags in the board yaml
where its clearer for both cavs25 and other cavs/ace boards what
to ignore even if duplicated.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Replaces the capitalized DMIC tag with dmic as tags in Zephyr are by
convention lower case.
Was unexpectedly building this sample for intel boards while ignoring
dmic (lower case tag).
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Replaces the capitalized I2S tag with i2s as tags in Zephyr are
by convention lower case.
Unexpectedly built the i2s echo sample when given the lower case tag in the
ignore.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Tags the chre sample so it may be ignored for platforms that don't want
to build or run this sample.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Because posix emulated execution is significantly faster than posix
emulated timer and benchmark finishes before even the first tick occurs.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Needed because benchmark finishes faster than a tick, especially on
emulated platforms where tick rate is 100Hz. Output units are also updated
to print numbers with less digits.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Stack sizes need to be dependent on something arch specific such as
idle stack size because they're smashing their stacks.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There is no need to block the thread for a second.
Let it sleep for 100 milliseconds, which should be enough
to set the host baud rate.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add support for RT595 evk to adc driver sample. RT595 uses external
reference voltage, which is set to 1.8V on this board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sample to put the part into Deep power down mode by
setting the state to PM_STATE_SOFT_OFF.
Wakup the part using an RTC alarm.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add sample to test memory controllers that map external RAM into
SOC address space. This sample uses the "sram-ext" alias
node to determine the base address and size of the external RAM
device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix few duplicate keys warnings in sample.yaml and testcase.yaml files,
this is going to enable some tests that were otherwise being
unintentionally ignored.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all comments-indentation errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(comments-indentation)'
This checks that the comment is aligned with the content.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all hyphens errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(comments)'
Default config would be to require two spaces after the start of the
comment, proposing to keep it on 1, inline with the Linux binding
config, that is:
```
- comments:
- min-spaces-from-content: 1
```
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all hyphens errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(hyphens)'
Default config is only one space after the hyphen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all brackets errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(brackets)'
Default config is to have no spaces inside brackets, changed few
documentation strings as well that refered to lists even though the
linter does not care about those.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Now that we a proper API, shell is just optional, so, make the
dependency optional by refactoring the code.
Also, add a build test combination in twister.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
led0 and pwm_led0 are both referring to the same LED. The usage is
mutualy exclusive, as only one pin muxing can be applied.
Disabling child nodes is currently neither supported by gpio-leds device
nor by pwm-leds device. We need to disable either of the devices
completely for correct operation.
Please note that even if disabling of child nodes would be supported, the
devices would be empty anyway, as both have only one singe LED defined at
the moment. Therefore we can completely disable one of the devices in any
case.
Fixes: b876ad9d6f ("boards: arm: rpi_pico: add pwm bindings to
devictree")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
The fractional part of the divider value is a 4 bit value.
Fixes: 91f659d70a ("samples: led_pwm: add overlay for rpi_pico board")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
The default deferred logging mode is not appropriate here. The LOG_INF
messages "Turned on", "Turned off", ... indicate the current state and
should be printed immediately to keep log output in sync with actual
LED state.
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
The fractional part of the divider value is a 4 bit value. Setting it to
255 leads to an overflow in pwm_rpi_get_clkdiv(). This has resulted in a
slight deviation from the reported timing, which is btw. printed in nsec.
Fixes: c5cb0d1a3b ("samples: blinky_pwm: Fix sample for rpi_pico")
Signed-off-by: Oliver Barta <o.barta89@gmail.com>
