DAD use dad_count attribute in struct net_if_addr, since DAD is ran on
each and every ipv6 unicast address.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The extra check for CONFIG_NET_OFFLOAD is not needed as it
prevents documentation generation for this API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that IPv4 specific functions are callable even if
IPv4 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv6 specific functions are callable even if
IPv6 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function just stores the buffer pointer passed, so explicitly
mention that the buffer must remain valid while netif itself is
valid. For example, it can't be stored on stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even if we do not have wifi network offloading enabled, allow the
application to be compiled just fine. This allows easier
testing of the application even if the board does not support
wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reduces memory overhead on net_if_dhcpv4: 16 bytes vs 120 bytes
before. This might proove to be beneficial when there are many network
interface.
dhcpv4 ROM consumption is now 2132 bytes vs 4224 (many switches removed)
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Allow creation of TX timestamp thread which will collect TX timestamp
information from device drivers. If the callback is registered, then
it will pass that timestamp information to the relevant party for
further processing. This support will be used by gPTP code in
subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have multiple network interfaces and we want to send
a IPv4 network packet to certain destination, then this new
helper can be used to figure out what network interface to use.
Note that this commit only adds support to select the correct network
interface according to destination IPv4 address. This does not enable
any automatic routing to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DEVICE_NAME_GET() macro should be used instead of fixed
string when creating a device pointer in net_if_dev structure.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
