Call the RPA expired callback on advertising sets even when they are
not enabled.
The RPA expired callback will now be called on advertising sets
when the BT_ADV_RPA_VALID flag is cleared for the set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout expiration when BT_EXT_ADV has been enabled.
Always invalidate the device RPA on RPA timeout.
This RPA is used by the scan roles, and the advertiser that was started
using the bt_le_adv_start API.
Call the RPA expire callback only on advertising sets that are enabled
and not being limited by a timeout and not using the identity address.
On RPA timeout always invalidate the RPA of advertising sets that are
disabled.
Fixes: #51208Fixes: #51228Fixes: #51247
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a test that validates fetching every property from the sbs gauge driver
results in no driver error codes being returned.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add a sample sbs gauge driver with feature parity and basic tests
comparison to its sensor counter-part. Includes a simple stub test that is
extended upon.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The "net mem" command handler did not take the variable buffer length
configuration, and failed to build in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, net_pkt code did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, the TCP stack did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case Echo Request did not carry timestamp (i. e. requested payload
size was smaller than 4), there won't be a timestamp in the reply
either. Such replies should not be ignored. Instead, simply skip the
turnround time calculation if timestamp is missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add -s parameter to the net ping command, allowing to specify the
payload size for the Echo Request.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Let net_icmpv4_send_echo_request() and net_icmpv6_send_echo_request()
autogenerate Echo Request payload, in case data length is specified but
no data pointer provided. The autogenerated payload includes timestamp
(if payload size permits) so that the turnround time can be calculated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Local procedure for CIS central establishment. Calls yet unimplemented
functions in ull_central. Changes are guarded by
CONFIG_BT_CTLR_CENTRAL_ISO.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add missing fields in structure containing the arguments used by
the host commands handlers and change the order of parameters
in macro used for defining the handlers.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
This commit increases the stack size for thread handling the host
commands requests. It was required due to the stack being
corrupted using earlier default size. The thread priority is now
configurable using the Kconfig.
It also adds alignment to the tx_buffer since the npcx MCU requires it
to work correctly and removes clearing the buffer before use due to
the hard time requirements. Tests checking if buffers are cleared
are also removed.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Move the header file to corresponding directory which refers to
submodule name instead of root of drivers directory.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The commit moves MCUmgr SMP transport documentation from
subsys/mgmt/mcumgr/lib to doc/services/device_mgmt.
Documentation have been rewritten for that purpose.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit reworks mgmt/mcumgr subsystem source code to remove
lib subdirectory and make it a little bit more flat.
It also moves all API interface files, which are supposed to be
visible by applications using MCUMgr, to interface sub-directories,
and exposes them with full paths; for example to include general
MCUMgr support, group registration and so on, user would now include:
<mgmt/mcumgr/mgmt/mgmt.h>
to additionally have control on File System group management
registration user would need:
<mgmt/mcumgr/mgmt/grp/fs_mgmt.h>
All internal headers have been removed from interface.
CMAkeLists.txt get significant rework and various MCUMgr subsystems
have been divided into separate sub-libraries.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When application uses multiple identities mesh stack keeps reacting
on connection events not related to the own identity (BT_ID_DEFAULT)
causing it to trigger additional advertising and this leads to errors.
Though not harmful, this also leads to mesh stack counting connections
wrongly and consuming internal resources.
This commit fixes the issue described above by checking the
connection id before proceeding further.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Explicitly set all bits of used radio registers when
configuring radio events, removing the dependency on having
the power-on reset value and removing the need to ensuring
power-on reset values being set in the radio peripheral.
This will ensure the Controller has radio register value
correctly configured irrespective of changes across SoCs'
radio register power-on reset values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This reverts changes introduced in commit
dd535f611d, as they broke the gsm_ppp
driver integration with PPP L2. Apparently, a more thorough
refactoring is needed to use the new interface management scheme with
PPP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
strcpy copies string including terminating null character.
strlen returns length without terminating null symbol.
If oob string is 16 bytes length then strcpy will corrupt byte
after auth array.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The sample in the Provisioning protocol spec chapter
is in big endian. Static OOB value should append
zeroes on the little endian platforms.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Rename the reg_read and reg_write functions in the emul_sbs_gauge emulator
to be more unique symbols so as to support overriding this specific
function in future tests that make use of FFF. See #46817 which includes a
test for error reads as an example.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The SBS Gauge emulator would set the I2C buffer message with a value from
the emulator's custom read function even on a read error instead of just
returning. This behavior may be improperly relied upon by future tests.
Return early on register read before setting the i2c message buffer value
in the emulator.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
To facilitate testing improper reads and writes on various registers,
enable the emul_sbs_gauge reg_read/write handlers to return custom exit
codes.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In file `subsys/bluetooth/mesh/net.c`:
renamed `loopback` to `net_loopback`.
In file `subsys/bluetooth/host/settings.c`:
Renamed `set` to `set_setting` and `commit` to `commit_settings`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Removes the global cur_mcs_inst and replace it
with lookup functionality.
This fixes an issue with bt_mcc_discover_mcs not being able
to be called more than once, as well
as streamline the implementation significantly.
This is also the first step towards not only supporting
multipe MCS instances for a single device, but also a
step towards handling multiple devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It was possible that on re-connect, the MCC implementation
would receive notifications when cur_mcs_inst was NULL.
This is partially caused by a bug in gatt.c, but can
and should also be handled in MCC.
This commit ensures that we do not compare handles
on notifications with a NULL instance.
This commit also ensures that subscribe_mcs_char_func
is not called outside the context of the discovery
procedure by setting the subscribe callback
to NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add zbus message bus as a Zephyr subsystem. No message bus
or communication abstraction other than the usual (message queues,
mailboxes, etc.) enabled developers to implement event-driven systems in
Zephyr quickly. Zbus would fill that gap by providing the community with
a lightweight and flexible message bus. The implementation tries to be
closest as possible to the existing ones. We use the claim/finish
approach, and the API for publishing and reading channels are similar
in message queues. Zbus is about channels, messages, and observers.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
If adv stop was called form connected callback,
it would continue and unref the wrong conn object
if there where 2 connectable advertisers running,
but with only one 1 id configured.
Fixes#52196
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
Fix advertising set's is_enabled flag to be reset when
connection complete is dequeued for connectable advertising
started using legacy advertising enable HCI commands. And
reset the is_enabled flag when advertising set terminated
is dequeued for connectable advertising enabled using
Extended Advertising HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks difference calculation to determine delayed
prepare callback. Without the use of masking by
ticker_ticks_diff_get, the diff value can be higher than
the supported 24-bit value. i.e. ticker_ticks_now_get()
rolls over in 24-bit value, whereas ticks_at_event is
free running value of 32-bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for compiling in support for several different
regions/frequencies and dynamically choosing which to use in run-time.
This commit introduces no API breakages - if a prj.conf contains only a
single region Kconfig, the new function lorawan_set_region() does not
need to be called.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
Add long control PDU size support, also the implementation
now allocates control PDU size restricted to the supported
biggest control PDU that is enabled in the application
build. Features that are covered based on the increasing
control PDU sizes are ClearText connections, Encrypted
Connections, Connection Parameter Request support and
Create CIS control Procedure (Connected Central ISO)
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After merging #51809, a few things were spotted that needed tweaking.
Among them:
- Rename the folder from bt_crypto to crypto, since the prefix is
unnecesary
- Remove the include folder
- Remove the path from the global include paths
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
