The MCP2515 requires phase segment 2 to be at least 2 time quanta.
The prescaler has a 6 bit register, allowing for real-world prescaler
values between 1 and 64.
Fixes: #44484
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Do not force CONFIG_CAN_AUTO_BUS_OFF_RECOVERY=y. Instead fix the return
type of the mcp2515_recover() function and return -ENOTSUP.
Fixes: #44344
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Include a pointer to the CAN controller device for the CAN
transmit, receive, and state change callback functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix build break introduced in 03ab730347:
/zephyr/drivers/can/can_mcp2515.c:871:55: error: 'const struct
mcp2515_config' has no member named 'int_pin'; did you mean 'int_gpio'?
871 | LOG_ERR("Unable to configure GPIO pin %u", dev_cfg->int_pin);
/zephyr/drivers/can/can_mcp2515.c:942:14: error: 'GPIO_DT_SPEC_INST_GET'
undeclared here (not in a function)
942 | .int_gpio = GPIO_DT_SPEC_INST_GET(0),
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Reduce the number of TX buffers in use on the MCP2515 from 3 to 1 in
order to avoid CAN frame priority inversion.
The MCP2515 is unable to do internal TX frame arbitration based on the
CAN-ID of the frame. Priority must be set per TX buffer and the priority
cannot be rewritten unless the frame transmission is aborted.
Fixes: #26541
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add optional user data argument to can_set_state_change_callback() to
comply with Zephyr API design guidelines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Catch up on the CAN driver API argument naming changes:
- Unify naming of callback function pointers as "callback".
- Unify naming of user-specified callback function arguments as
"user_data".
- Instances and pointers to struct zcan_frame are named "frame",
not "msg", to avoid confusion with the CAN message queue support.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The maximum number of concurrent filters depends on the hardware and
the driver implementation. This API allows the application to obtain
the maximum number of available filters.
Signed-off-by: Martin Jäger <martin@libre.solar>
Refactors all of the CAN drivers to use a shared driver class
initialization priority configuration, CONFIG_CAN_INIT_PRIORITY, to
allow configuring CAN drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The exception
is the mcp2515 driver which has a dependency on a SPI driver and must
therefore initialize later than the default device priority.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Move filter match function to can_utils.h, so that it
can be reused for Renesas driver.
Preserve copyright from Karsten Koenig.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
If the supplied sjw in the timing parameters is zero,
the sjw parameter should not be changed.
This fixes the uninitialized swj in can_set_bitrate.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
socket_can_generic.h makes some assumptions that are not always valid
for various drivers with regards to numbering. To clean this up we
add defines for SOCKET_CAN_NAME_0 and SOCKET_CAN_NAME_2 in addition to
SOCKET_CAN_NAME_1.
We also move struct socket_can_context into the drivers themselves
since they know best how many CAN interfaces are getting supported and
what naming/number convention they'd have.
Additionally, this also exposes a few other build issues with the
can_mcux_flexcan driver that get fixed.
Finally, we remove the platform_allow from samples/net/sockets/can
since it is no longer needed.
Fixes#31733
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CAN_MCP2515_MAX_FILTER is not needed anymore and was probably just a
misunderstanding. Aligned it with the other CAN drivers.
This also was the last difference in the mcp2515 specific config for the
can sample, so that can be deleted as well.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Check if the timing is not set from device tree and exclude
sample-point algorithm if it is not used from device-tree.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Prevoiusly there is no network interface for mcp2515 driver.
This is solved by calling the NET_DEVICE_INIT macro in mcp2515 driver.
fixes: #30432
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The device may be prematurely configured before it is ready during
reset without first checking. After the driver writes to the registers
and normal mode gets selected, CANSTAT is read back to ensure the
device is now configured in normal mode (0x00). However, an
unresponsive device will be read as 0x00, the driver then assumes it is
configured correctly.
The MCP2515 will reset into configuration mode (0x04) to allow bit
timings to be configured. Adding a check for this mode prevents the
device from being misconfigured.
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix use of DT_HAS_DRV_INST which does not exist.
Use DT_HAS_NODE_STATUS_OKAY(DT_DRV_INST(n)) instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
As we phase out per instance Kconfig symbols convert to utilize
DT_DRV_INST to initialize CAN instances.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Mark the INT signal to be active low and use the new functions to get
gpio state and configure the gpio interrupt flanks.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
When loading the TX buffer via SPI only transfer the data bytes of
the CAN message that will be used as defined by the DLC.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
This commit limits the data length code to eight.
DLC > 8 returns a newly introduced CAN_TX_EINVAL error code.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Reduces SPI RX buffer read overhead by a byte and further reduces the
SPI use by automatically clearing the associated receive flag RXxIF.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
This commit extends the CAN API with the following functions:
- can_get_state
- can_recover
- can_register_state_change_isr
This functions can be used to get the error-counters and the state
of the CAN controller. The recover function can be used to recover
from bus-off state when automatic recovery is disabled.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
