Update release notes for deprecation of the bt_conn_create_slave_le
API call, which has now been deprecated in favour of bt_le_adv_start
with peer address in advertising parameters instead.
Fix previously mistake about BT_LE_ADV_* deprecated macros,
application should use GAP defines, and not HCI defines.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_REG_IDX_<idx>_EXISTS 1
DT_N_<node-id>_IRQ_IDX_<idx>_EXISTS 1
This will allow us to use IS_ENABLED() in DT_REG_HAS_IDX and
DT_IRQ_HAS_IDX which matches behavior of other DT_*_HAS_* macros as
well as lets use these with COND_CODE_1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a devicetree/zephyr.h header, which is meant to contain
definitions for /chosen properties specific to Zephyr.
Currently, this just deals with zephyr,entropy. We add a
DT_CHOSEN_ZEPHYR_ENTROPY_LABEL macro which expands to the label for the
node pointed to by zephyr,entropy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add generation of the following macros:
DT_N_<node-id>_P_<prop-id>_NAME_<NAME>_EXISTS
DT_N_<node-id>_P_<prop-id>_IDX_<idx>_EXISTS
This will be useful to check availability of named or indexed
property like dmas/dma-names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sometimes you are only interested in doxygen, so need to wait 10 minutes
for everything to generate in this case. Now just do:
make doxygen
and get only the doxygen output.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ext/hal/cmsis was moved out of the ext folder and into external modules
so we should remove the licensing exceptions noted in this document.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
HWINFO drivers should be responsible for ensuring that
the data structure is a sequence of bytes. That is not
what the current sam0 and nordic drivers do. The drivers
read the data as u32_t and then memcpy the data to a
buffer. This ensures the data has the endianness of the
underlying MCU, which in this case is Cortex M0 which
is little endian.
This commit fixes the endianness so the data can be
interpreted as a "left to right sequence of bytes".
This commit updates the API doc to provide clarification
of the data structure.
Add to 2.3 release notes.
Fixes#23444, #24103
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Zephyr board names must be globally unique which requires that they
encode all necessary information to identify a specific target.
Typing in these names can be inconvenient to developers working on
multiple targets within a single workspace.
Extend the cmake infrastructure to read an optional board aliases file
that will map custom aliases to the corresponding canonical Zephyr
board name.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When this west doc page was written, we didn't have any documentation
for modules. We do now, so point to it instead of CMake.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the board redirects. The following boards existed before we moved to
a new style of URL for boards, and thus each have 2 entries (old style
old name to old style new name; new style old name to new style
new name):
- nrf51_pca10028
- nrf52810_pca10040
- nrf52840_pca10056
- nrf52840_pca10059
- nrf52_pca10040
- nrf52_pca20020
The following boards did not exist (or were not referenced) before we
moved to the new style of URL for boards, and thus only have one entry
(new style old name to new style new name):
- nrf51_pca10031
- nrf52811_pca10056
- nrf52833_pca10100
- nrf52840_pca10090
- nrf5340_dk_nrf5340
- nrf9160_pca10090
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The original API was misnamed, as the intent was to provide a manager
that decoupled state management from the service that needed to be
turned on or off. Update all the names, shortening them where
appropriate removing unncessary internal components like _service.
Also remove some API that misled developers into believing that onoff
managers are normally expected to be exposed directly to consumers.
While this is a use case, in most situations there are service or
client-specific actions that need to be coupled to transition events.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
k_poll() for a signal is often desired for notification of completion
of asynchronous operations, but there are APIs where it may be
necessary to invoke "asynchronous" operations from contexts where
sleep is disallowed, or before the kernel has been initialized.
Extract the general notification solution from the on-off service into
a utility that can be used for other APIs.
Also move documentation out to a resource management section.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We are renaming the nrf5340 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf5340 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handler functions are now referred to as verification functions,
update documentation to reflect this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
"why can't I run west build" is a common enough question to add an FAQ
item for it in the troubleshooting page.
Even if people don't read it, we can still link to it on Slack etc.
when the question gets asked.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
And implement DT_ANY_INST_ON_BUS() in terms of it.
This makes some error messages quite a bit shorter by avoiding
UTIL_LISTIFY(), which has a nasty temper and tends to explode if not
treated gently.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We are renaming the nrf9160 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf916 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In order to de-duplicate 2 macros with the same use,
merge BUILD_ASSERT(), BUILD_ASSERT_MSG() into one macro.
Make BUILD_ASSERT_MSG() deprecated.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a section in the 2.3 release notes for the API changes, and document
the ones introduced by the Advertising Extensions support in the BLE
Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Trivial cleanup: sort the devicetree/foo.h includes and the relevant
sections for them in the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit changes the current boilerplate include description and
instead describes the use of find_package(Zephyr)
It also add a section covering additional possibilities when using
find_package(Zephyr).
- Search order
- Zephyr repository application description
- Zephyr workspace application description
- Zephyr freestanding application description
- Environment ZEPHYR_BASE setting
- Multiple Zephyr and preference setting
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of ZephyrConfig.cmake all parts of CMake code
should rely on the CMake ZEPHYR_BASE variable instead of the environment
setting.
This ensures that after the first CMake invocation, then all subsequent
invocation in same build folder will use same zephyr base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated howto "create struct devices in a driver" section to use
DT_INST_FOREACH instead of manual per-instance macros.
Signed-off-by: Ioannis Papamanoglou <iopapamanoglou@gmail.com>
The documentation was not updated following a change to the way
DT_PROP_LEN works which was made in review. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The board porting guide now has useful information on supporting
flash/debug commands. Link to it from the top of the page describing
these commands to hopefully make it easier to find.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This page has a lot more information about APIs than just stability,
and I believe it's currently our only exhaustive list of APIs.
Rename it to API Overview.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This was still set to 3.4, and does not include REQUIRED to fail the
build in case of an old version.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
k_cpu_idle() API does not need to be invoked with interrupts
unlocked; it is actually invoked with interrupts locked by
the kernel CPU idling mechanism. In most architectures, the
function is, actually, un-locking interrupts itself. We need
to remove this comment from the documentation of the CPU
idle API. We add a note about the un-locking of interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
