Update RPC functions and data types, works with NBLE firmware
niko-0301
Change-Id: I3538fab1d20c6e140d995a797d68486be6cd0f23
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement GATT nble_gattc_disc_rsp() function, may be tested with
bluetooth shell app.
Change-Id: I80c9596e83310902de40f6e91d2ecd4b5d2f3292
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_conn_lookup_handle() would be used in gatt.c to access conn's
discovery parameters.
Change-Id: Ibb494cf8af90ccab478fa7463a41942b06029539
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Store GATT discover parameters in bt_conn due to lack support from
NBLE RPC.
Change-Id: I47ade89b4861c9f1260ce3a3dc158d6344de334e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Cancel ongoing connect request when we receive disconnect command.
Change-Id: I12f1c1326c4b13672879b8f2dbe457cae395b486
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_conn_disconnect() API function.
Change-Id: I08979d35400cf947d7ec646bad72f625141f95e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Connection state helps to keep make right choice when connecting /
disconnecting.
Change-Id: Ifea620c05f869a633f578bf5d5c8ba603a58a46a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This debug option enables debug of Nordic RPC.
Change-Id: I2e963f10ed6407b836e1572673244cb0187227d2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use NBLE_DEBUG_GAP to enabled / disable GAP NBLE
debug.
Change-Id: Iefbb18e697d523137a101df00b02d46e209e7f14
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement Bluetooth LE scan start/stop API for Nordic.
Change-Id: I3dc153346d0135501091a4b952a3c60c081802db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_conn_create_le() and copy bt_le_conn_params_valid() from
net/bluetooth.
Change-Id: I6b3fff5027a82b8040c0c724eac1251945415f43
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Structure has changed in firmware headers.
Change-Id: I0df1549ce5353a2c7807f7839ee9270e833fbbf2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove empty function declaration using weak autogenerated method.
This solves API to NBLE constantly changing problem.
Change-Id: I2ff90559dfbf78e9c34e602195d8a76ab9750a47
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The bt_conn_get_info() API also needs the local address. For now
simply use an extern declaration to get access to the variable that
resides in gap.c.
Change-Id: I3ddb598785cfb6a5d07fc10621f6d20a610536be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_conn_get_info() API requires that we track the role and the
various connection parameters.
Change-Id: I732eace1e45173f94962df3f11dbe5ad520a75cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are mostly cosmetic changes, shall work with firmwares
niko-0214 and niko-0215.
Change-Id: Id39c6b9cee6e759f77a05259632e453492ffe498
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Due to firmware update of NBLE starting from 02/12 revisions onwards
there is a need to sync RPC headers and functions.
Only to be used with above mentioned NBLE firmware!
Change-Id: Ifc2ce28f81e819bb517ef3891610d78089a00428
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We should just discard the data if the received table index goes
beyond the actual table size.
Change-Id: I267621f098e349abab5a1f37f485a28448a9396b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data is in a net_buf already so we can just pass this to the
deserialization code. The net_buf context and API helps simplify the
code quite a lot.
Change-Id: Iecb62d3151d229a09538ad652508f1eb9c6c3ffc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want to fine-tune the stack size of the fiber that's
used to make callbacks into the application.
Change-Id: I2cd3e79283fe85359389528e84d9bcc21e3e19f6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't require being able to read the full header in a single ISR call.
Instead track the number of received header bytes. Also check for IPC
length before allocating buffer to avoid unnecessary buffer
allocations.
Change-Id: I1678c3ac3aaf35a1b9bbe930cc2e942fce3f458a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We can take advantage of the net_buf headroom. At the same time move
the necessary definition straight into uart.c and remove any unused
definitions.
Change-Id: I932bba2cfb11808aabce7bad09e41f94d073bb5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using net_buf helps us remove a lot of the pointer & data length
book-keeping variables and in general makes the code more readable.
Change-Id: Iec870a3bacbb63b55329ef5214b0ee0a757f5b1e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will prevent debug output to be printed if in case
CONFIG_BLUETOOTH_DEBUG_GATT is not defined.
Change-Id: I93be7ccbcf0a8eae5ecb54b174d6ed2d892673dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This option can be used to enable debug for GATT using the same option
as with HCI driver.
Change-Id: Ie2f2692422bc1e1f2a5504c60d90961261b53d17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add printing local bdaddr to help with discovery.
...
on_ble_gap_read_bda_rsp (0xa80089a4): Local bdaddr: C3:40:54:C7:DE:B4
(random)
...
Change-Id: I19f8000b1029fdc839303203d6bac91ee76231ed
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Read and store local bdaddr, serialize command sequence.
Change-Id: Iea6a0e9d7dab3bbba04c26f47f07bc5d2527e9d7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using rsp instead of par makes code more intuitive.
Change-Id: Ib6594e78f4c6d0088e66e9023a696ea42a2e1f4f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove not used code and decrease number of log messages
Change-Id: I3a41fcc15d7f7b7e8802a13f6eb871794437a87c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following changes in NBLE firmware update our RPC, shall be compatible
with firmware images building from 02/10.
Change-Id: Ifeb1193a241e9fea39c52a6c0f5bbd6c21041c08
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
