Refactor out the scan roles handling from hci_core.c to its own source
file in scan.c.
Scan roles consists of regular scanning and synchronization to
periodic advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't include checks for advertiser is enabled when the broadcaster role
is not enabled. This makes it possible to have bt_le_ext_adv_foreach
be excluded from the compilation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the identity handling from hci_core to its own source file
in id.c
Identity consistes of managing the identities of the device, the privacy
feature which hides the identities. And handling of the identity
resolving list in the controller, needed to support privacy-enabled
remote devices.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the code so that bt_adv_lookup_legacy is always called after
the IS_ENABLED(CONFIG_BT_BROADCASTER) configuration has been checked and
the code path will be excluded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor command state state handling to one function.
When setting state outside of hci_core the cmd macro is not available,
so in order to assign the buf pointer to state the function is needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add the option CONFIG_BT_HCI_ACL_DATA_SIZE which allows the user
to configure the max HCI ACL data payload. This is needed for platorms
where the BLE LL, HCI uart and host run on three different cores.
Fixes: #30441
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
Overwrite the existing bond when the IRK of the existing bond could not
resolve the RPA of the peer. This would happen if the peer has deleted
the bond and replaced the IRK that was used.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor update_keys_check helper function to operate on input keys
input. This allows the function to be re-used on a keys structure that
is not the current connection keys.
This also avoids the helper function changing the connection state.
The conn->le.keys pointer should at this point always have been
assigned, as central when sending the pairing request, and as peripheral
when receiving the pairing request at the very latest.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Health Fast Period Divisor is stored within
the model publish parameters on the access layer.
The opposite part for divisor restoring has been missed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Adds the const qualifier to the internal api for adding and removing
virtual addresses, to allow them to accept const hardcoded values in
tests.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the debug log printing the transport packet metadata to after the
keys are resolved, so that the subnet pointer is valid.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a "polled" function to the friend callback structure, that gets
called every time the friend receives a poll message. The polled
callback is called before the establish callback, to match the LPN
behavior.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The SCA (sca) field of bt_iso_chan_qos did not give much
information about the expected values or what they meant,
nor any information about what the value perhaps should be.
Updated the description and the ISO shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To prevent the transport layer from accepting duplicate or out of order
segmented messages, add an RPL-like check for the SeqAuth of the
segmented messages when their context is allocated. This prevents
duplicate receives of the same segmented messages in the case where a
single source address sends two segmented messages in parallel (to two
different addresses):
Previously, when receiving two segmented messages, the first message
would go through to the access layer, then the second. Then, if the
transport layer received any repeated segments for the first message, it
would fail to identify the SeqAuth as old, as all its segments were of
new sequence numbers, and the "already complete SDU" check would only
look at the second message. Thus, the segmented message got processed
again and passed to the access layer, even though it was a duplicate.
To solve this, we need a mechanism like RPL, but only for the segmented
messages' SeqAuth. We cannot re-use the actual RPL mechanism, as it
can't support the scenario provoked by the "blocking tx" mechanism in
transport. This mechanism allocates the SeqAuth when the message is
first passed to the transport layer. The ongoing message that caused the
block would keep sending segments with higher sequence numbers than
the blocked message got, which will cause the blocked message to fail
the RPL check.
This patch adds a parallel SeqAuth mechanism to the RPL module, which
only deals with the SeqAuth of the segmented messages. This list gets
checked when the segmented message is first allocated, in the same
manner as the general RPL mechanism. The storage gets hooked into the
RPL mechanism, by adding a separate seg field to each RPL entry.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When Extended Advertising terminated due to duration or
maximum number of events, the auxiliary PDU scheduling
is now correctly stopped.
Fixes#31254.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the legacy delayed work API with the new delayable work API.
Avoid cancelling work and manually notifying when the subscription is
disabled; instead allow the work item to do this.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace the legacy delayed work API with the new delayable work API.
Use a zero period as a flag value to ensure that the work handler is a
no-op of the publish operation is disabled.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch to new work API, taking advantage of the difference between
schedule and reschedule to force an update if the new deadline is
sooner, and retain any previous deadline (or use the new deadline) if
it isn't. Do not leave a path out that could, due to races, fail to
schedule necessary work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch to new work API. Avoid a racy cancel by allowing the work
handler to deal with an immediate off when the time remaining changes
to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
k_work_pending is now called k_work_is_pending.
These two uses are correct assuming the functions that invoke them are
not involved in race conditions: that the work is not pending is an
allowed condition for modifying state that will be used by the work
handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The error code from gatt_service_register is being ignored to ensure
that repeated actions still complete. Do this explicitly by adding
(void) casts, resolving coverity warnings on accidental error code
ignores.
Fixes#33051.
Fixes#33074.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If CONFIG_BT_MESH_SEQ_STORE_RATE is 1, the check in store_seq can be
reduced to a simple if (false), and the modulo code does not need to be
included in the build.
Fixes#33036.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the if !(pub) check to happen before it gets used in the
initialization of the message context in bt_mesh_model_publish.
Fixes#5116.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Include virtual label's pending_store function in the LABEL_COUNT > 0
compile guard to avoid including dead iteration code in the compilation.
Fixes#32928.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Check that the assigned subnet hasn't been removed in heartbeat_send to
avoid potential NULL defererence in transport's ctl_send.
Fixes#32907.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added comments to explain the re-use of allocated same
connection context to both 1M and coded PHY scanning context
when both PHY is enabled for initiating connection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Initial work in progress implementation of Create Connection
Cancel for Extended connection initiation.
Adds implementation to teardown connection initiated at ULL
layer and gracefully release allocated resources.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use an "initiated" flag in the lll_conn struct to guard the processing
of PDUs related to connection initiation (CONNECT_IND,
AUX_CONNECT_RSP). This avoids races between ULL and LLL when creating
a connection.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Log the security keys that the sniffer needs in order to sucessfully
decrypt the connection.
This option allows the sniffer to work in the cases where enabling
using the SMP debug keys is not wanted, either because it changes the
way the peer behaves or is denied by the peer.
It also enables the sniffer to decrypt a connection where the bond
already exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert allowed_cmds to an array of atomic_t of size 1.
This makes it future proof in case more commands are added.
Possibly silences coverity false positives on array vs singleton usage.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix some format warning in cfg_cli.c.
Fix use CID_VNAL as param when use vendor models.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fixed some undesired or incorrect macros, which
can cause build error.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Correct format errors, such as oob action 2-octers
should use 0x%04x, and action in prov capalilities pdu
big-ending. When every call `bt_mesh_auth_method_set<*>`
should also clear auth value, otherwise will case confirm
failed.
Provisioner role expect peer public key should be sent
immediately, instead of requiring ACK. After all, ACK may
be lost, and the other device’s public key will be sent
over, and provisioning procedure will be failed..
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Move the ticker job_guard reset to after
ticker_job_compare_update, so that the ticks_current and
ticks_slot_previous are updated before ticker_worker gets
to execute. Without this fix, there is a possibility that
ticker_worker will use incorrect ticks_slot_previous and
ticks_current value under race conditions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker job to defer itself to avoid recursive
invocation to itself due to ticker interface calls from
inside the ticker operation callbacks.
The recursive use was exposed when using ticker stop
operation callback of stopping an auxiliary PDU to stop
the primary PDU scheduling as part of generation of
Advertising Terminate event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove inclusion of vendor specific internal LLL include
files in ULL source code.
Prefix `lll/` include file path to correctly include vendor
defined types and function implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow NULL pointer to be passed to bt_id_get function so
that only count can be fetched.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's a prompt to set the TX stack size, that's documented as an
advanced setting, but attempts to override it it are rejected unless
you add another setting that allows it to be change. Tell the user
how to make changes work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove compilation warning caused by currently not used
hci_df_set_conn_cte_tx_param function.
Code is sorrounded by #ifdef CONFIG_BT_CTLR_DF_CONN_CTE_RSP.
The CONFIG_BT_CTLR_DF_CONN_CTE_RSP is changed to be disabled
by default (until complete implementation of the feature is
provided).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
