Due to the recent changes, read parameters pointer is passed as user_data,
not as gatt_private.
Change-Id: I08b59164acfec8d71801ae2a23ce51abad080dc8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Revert to RPC to BLE Radio Module 0425 as it is going to be official
open source release beta.
This reverts commit a52d7d7fe0.
Change-Id: Ibdb98b26bcad0a04849e89622527884a2b67c8d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes using uninitialized structure nble_gattc_write_param in
nble_gattc_write_req().
Change-Id: I476a3b833994c422691bf96dc0b2174368c47fa6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since RPC to the Nordic BLE module has no flow control increase
receive buffer pool to handle events from the module. Without this
NBLE stack is not capable of handling all events and we get "No
buffers" error message.
Change-Id: I0566b30a95ef0a027d4533c83c3c2915018a650a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
on_nble_gap_connect_evt() gets called in a case of incoming connection
but also with outcoming one. In this case connection is already
created so we should use conn_get() instead of conn_new().
Change-Id: I2ed2d0a1844f653000a12eb0f54f52533856bf0d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC following major RPC update in firmware.
Change-Id: I4094b94319359a59164ac69394937ac1472b8cbe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
set_ad() already checks for length==0 so there is no need for
checking if sd is valid.
Change-Id: Idc0ce9135eca56a1e8057f3a2129adb0b5e5ddd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Getting params from user_data seems to work now.
Change-Id: I81bccea9aa6994d3c09a3ff03a49fa6767e7305e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In on_nble_gattc_discover_rsp conn->gatt_private is set to NULL prior
to calling this parser functions. This fixes this issue by passing
discover params pointer to these functions.
Change-Id: I6669cb0d16dc65d532e17f96ceb9cd94dbe6ce08
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Updating function names prepares for firmware RPC update, to this
moment only names changed.
Change-Id: I8d19e83c5c88a4b41ed803e276652eb15e0d87b1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There's no need to drain twice if NRF51_PM is enabled, the draining
shouldn't use rx_ready(), and it should happen after disabling
interrupts. Also rename uart.h to util.h to avoid conflicts with
include/uart.h and remove the left-over ISR prototype declaration.
Change-Id: Id38110dd38cf48edfe4a7b8e2e68cd358a9aa5ea
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update function names following firmware name changing.
Change-Id: I8b42c4d9f5c892abec10d8653544c3e03e4ee80d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's possible that there's a queued event from the nRF51 at the point
where we start resetting it, resulting in the stack receiving two NOP
events. To prevent this, make sure to drain the UART while the
controller is in a powered off state.
Change-Id: Ic009e11c11ac750fc76c881c0ffe9bd12d38da0a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In a case connection is not known implement notification for all
connections the same way it is done for HCI stack. Attribute database
is scanned for CCC attribute and notifications are sent to all
connections.
Change-Id: Id556b4aa5af124aea672891ca89b278c71519643
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use similar to HCI stack cfg structure to keep value.
Change-Id: I54cf731971c5e2822385dc8eb295ce9951969af6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Save peer address to use it with bt_gatt_notify()
Change-Id: Ie5e3af4cdc2d225c9572e010359f59323ae493a7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Private gatt data from connection is indicator if another operation is
pending. Some att commands may be called within discovery callback
like subscription on ccc (within characteristic discovery procedure).
Without clearing conn private gatt data member, leads to rejection of
called in callback att command due to being "busy".
Change-Id: I72a35ed82dac2f0538f2d1637163bd2302f0b072
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This callback is needed to successfully perform write operation.
Change-Id: I09776dda16dac639320a7e83a66e7a9b31ebea6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
conn object pointer has to be passed to the write callback instead
on NULL pointer.
Change-Id: Ifde88be0a43bcd9e1acbe11b16512776cd18fc66
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If attribute has no write callback, BT_ATT_ERR_WRITE_NOT_PERMITTED
error shall be returned.
Change-Id: I9277f8682597ee7f93a1267d2de31b3cc245f1cd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Add debug for bt_gatt_notify() and print parameters in
on_nble_gap_conn_update_evt().
Change-Id: I5b61b5dbf508a2ee8e0b79c8636bc2dc710fb2ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the header was updated type cast is not needed.
Change-Id: I6a232cd8515fb48ef2a0d16cc064effac7b80bfd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that there's a helper for clearing nRF51-side bonds we can use
that in bt_storage_clear().
Change-Id: I9eea4b100834b150e7c55a5141f1624853335c0a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To ensure reliable behavior when pairing we need to clear the nRF51
persistent memory upon init.
Change-Id: I204bb27e7c6e33dc5dd006ad9937645e907e770f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The nble firmware supports a max ATT MTU of 23 (i.e. the default).
Change-Id: I70f55b00b50b2ad6540850d594a6d2fb89b11d1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We should be looking up the appropriate connection object and passing
that to the callback.
Change-Id: I04620b301541c8bda45f20e2b1dcca8f71562821
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to reset len to 0 in case of failure to prevent the nRF
firmware from reading past the end of buffer. At the same time clean
up the code a bit.
Change-Id: I2ac9a86e0f7704ae55c9b2758e02dfadf650f549
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update RPC to Nordic BLE radio module to 0425 revision.
Change-Id: Ieb79821acd5a8fbc4358ea5e1f258834a7932c2c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Do not depend on specific implementation of the driver, use
well-known driver name used across multiple IPs.
Change-Id: I823fcfa01ce1484dd89f6ade8fbe7017f2084bc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove handling not used and obsolete function prototypes.
Change-Id: I6086f2e13efe7fc219f237dda710a545bec07612
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC adding gap_tx_power request and event. Corresponds to BLE
version ATLASEDGE/PVT/FACTORY-386-gc1f694b.
Change-Id: I7e47553af63c3c3405522e37f86d9004dcca46f7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compilation with debug for drivers h4 and h5
Change-Id: Ia09ce0a5ca3d684a4f9d25fdfe8530e80a46afac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some controllers will emit an initial "NOP" Command Complete event
during initialization and expect the host to only send commands once
this event has been received. This patch adds a new Kconfig option to
be used in the case of such controllers and defaults this to true on
Arduino 101 with the H:4 driver where this behavior is currently
observed.
Change-Id: I440f14a7c07ac27545febf9f85ebcc343e2a4558
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes conn->gatt_private = NULL pointer dereference that occurs
in the next Read Blob Response, here:
/* TODO: Get params from user_data pointer, not working at the moment */
params = conn->gatt_private;
Change-Id: Icf280c856133a4c91fc10475d3a047809f917f46
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If incoming pairing request would result in JustWorks pairing this
can be used to request consent from user for accepting it.
Change-Id: If0695d0e1bb010bade6a16abe1b57a2ce07856cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
