Loopback test requires this in order to properly execute half
transactions. Otherwise, testsuite fails.
It was overlooked when fixing #85894.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Both EXMIF and SPIS peripherals are claiming GPIO port 6 pin 0, but
with different CTRLSEL values. This will trigger a build error with
nrf-regtool 9.0.0 as it is not possible to apply this configuration
to hardware.
Fix the issue by disabling the EXMIF node that is enabled by default.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Renamed the drv8424 stepper driver to indicate its support of the drv8424,
drv8425, drv8426, drv8434 and drv8436 stepper controllors. Also made the
microstep pins optional. All test files are renamed as well.
Signed-off-by: Jan Behrens <jan.behrens@navimatix.de>
Add bt_ccp_client_get_bearers that will return the bearers of
a client so that the application can always retrieve them if they
do not store them from the discovery callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When only changes are in the "hostap" module the wifi build tests should
be run. Add the module tag to fix that.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
IPPROTO_RAW is not a valid protocol type for AF_PACKET sockets, which
should only use IEEE 802.3 protocol numbers. Therefore remove support
for this type of sockets.
As an alternative, users can use AF_PACKET/SOCK_DGRAM or
AF_INET(6)/SOCK_RAW, depending on the actual use case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Register connection type along with family and protocol, so that it's
possible to differentiate between connection listening for raw IP
datagrams and TCP/UDP/other packets.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Private node identity advertisements must stop immediately when
ordered by PTS. To do so; adding enabled parameter to
btp_priv_node_id_get_cmd.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Replace uses of OVERLAY_CONFIG with EXTRA_CONF_FILE
to follow the rest of Zephyr where OVERLAY_CONFIG was
deprecated in favor of EXTRA_CONF_FILE.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The IT8xxx2 timer driver uses timer 7 and timer 8 to implement the alarm
timer and the top timer, respectively.
Signed-off-by: Yunshao Chiang <Yunshao.Chiang@ite.com.tw>
Introduce macro to check for valid microstep resolution in stepper api
Use this macro in tmc50xx driver. Stepper api tests adjusted in order to
accomodate the not implemented stepper api functions.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
The calculation of the object size may be incorrect when the size of
a field is smaller than the struct alignment. When such a struct is
used in an array field, the decoded object contains wrong values.
The alignment influences the object size. For example the following
struct has a calculated object size of 8 bytes, however due to
alignment the real size of the struct is 12 bytes:
struct test_bool {
bool b1; /* offset 0, size 1 */
/* 3-byte padding */
int i1; /* offset 4, size 4 */
bool b2; /* offset 8, size 1 */
/* 3-byte padding */
};
This commit changes the object size calculation and computes the size
with the offset and size of the last field in the struct (rounded up
by the struct alignment).
Fixes: #85121
Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
Add gpio driver testcase support for kv260. The overlay will select the
PS gpio bank to be tested.
For running this testcase on kv260 PS gpio bank 3 has been chosen
because it is EMIO and design is required to connect pins together.
Signed-off-by: Paul Alvin <alvin.paulp@amd.com>
Add a babblesim test of the BT Tester doing a GAP smoke test
connecting 2 BT testers using BTP.
The purpose of this is to further increase the test coverage
of the BT Tester in CI, as it is only being built, and runtime
errors are typically not caught.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some files should be separated from the common folder to
each soc folder for future expansion of the chip.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The ADC and watchdog samples are not currently supported for the
non secure target of the nRF54L15 DK.
Add exclusions for these until they are supported.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Fixes a large partition mounting error
for flashes with erase size > 32KB
(e.g. s26ks512s0 has 256KB erase size).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The ti,opt3001 ambient light sensor is capable of asserting its interrupt
gpio upon conversion completion. The interrupt gpio can then be used to
trigger a reading of the conversion result automatically.
Due to this, it makes sense for the driver to implement the sensor trigger
functionality.
Add a devicetree property, int-gpios, to the ti,opt3001 bindings to allow
describing the gpio used for getting interrupts from the ti,opt3001.
Implement the sensor trigger functionality with options for using the
global worker thread or letting the ti,opt3001 create its own thread for
servicing the interrupts.
In both cases, when an interrupt is received the driver will read a new
measurement from the chip and clear the interrupt. The sample is then ready
to be read by the user of the sensor.
When manually triggering a sample_fetch, the trigger handler is not
invoked.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
Migrates mps2 targets away from the pinmux driver to
the new pinctrl driver.
Signed-off-by: Samuel Chee <samche01@arm.com>
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add support for KWS Pico-SPE based on
Raspberry Pi RP2040
Add support for KWS Pico2-SPE based on
Raspberry Pi RP2350
Signed-off-by: Frank Bintakies <fbintakies@kws-computer.de>
Validate that `K_TIMEOUT_ABS_SEC` works the same way as the other
absolute timeout construction macros.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The address of the last i2c device in the build all test has a wrong
address. This fixes that typo.
Signed-off-by: Paul Timke Contreras <ptimkec@live.com>
When CONFIG_ZTEST_FAIL_ON_ASSUME is set, a failed assumption will
cause the suite to fail, but the individual test will be marked as
SKIPPED. We should fail the test so it's clear what's going on.
Fixes#86611
Signed-off-by: Yuval Peress <peress@google.com>
Adds tests to better gauge IPI performance on SMP. In each case, one
CPU is used as the source of IPIs while the remaining CPUs are busy
doing "work". Every 30 seconds the benchmark reports on the amount
of "work" done by the busy CPUs and the amount of work done by the
CPU generating the IPIs.
This can be used to ...
1. Show how enabling IPI optimization affects system performance
2. Show the cost of spinlock contention as the number of CPUs increase
3. Measure the relative performance of scheduler changes on SMP.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fixes failed test_lfs_basic for medium partition > 960KB
and for large partition > 3MB.
Flashes with large erase size require larger test partition sizes
(e.g. s26ks512s0 has 256KB erase size).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
On Linux, the function `power_on()` of Bumble will fail when executing
even-numbered test cases.
From the `btmon` log, the controller will not reply the `HCI Command:
Reset` when the issue occurs.
Add a try-except to catch the exception of the function `power_on()`,
and retry to call the function `power_on()` until issue no longer
occurs. Or, the test will fail due to the timeout.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Disables test logging defaults for the intel_adsp/ssp as it
has been found that when they are enabled they interfere
with the proper functioning of the test.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Improves error reporting in the intel_adsp/ssp test so that
errors are caught and flagged by the test infrastructure.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
According the specification, in extreme cases, the deviation of the APB
clock and LFCLK clock can reach up to +/-1% (+/- 10ms).
Therefore, exclude npcx platforms from the test because it required 1ms
accuracy.
fixes: #66185
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Added Internal pin connection for
I2S Loopback testing when I2S is enabled.
Added I2S testing support for RW612.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
When building with clang it reports:
tests/subsys/mgmt/mcumgr/settings_mgmt/src/main.c:69:22: error: variable
'test_response_read_data_start' is not needed and will not be emitted
[-Werror,-Wunneeded-internal-declaration]
static const uint8_t test_response_read_data_start[5] = {
^
tests/subsys/mgmt/mcumgr/settings_mgmt/src/main.c:73:22: error: variable
'test_response_read_data_end' is not needed and will not be emitted
[-Werror,-Wunneeded-internal-declaration]
static const uint8_t test_response_read_data_end[1] = {
^
The values of test_response_read_data_start and
test_response_read_data_end are not actually used anywhere in the tests.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
