Fix Extended Scan Duplicate Filtering to consider different
advertising mode and multiple advertising set id from same
advertiser Bluetooth device address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In HCI event, PHY indices start at 1 compare to 0 indexed in
aux_ptr field in the Common Extended Payload Format in the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to fragment the list of received Extended
Advertising PDUs into HCI LE Extended Advertising report
events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report data status to have
"Incomplete, data truncated, no more to come" when data
length is more than "Scan_Max_data".
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There were no assignment to iq_report->hdr.handle in the code
hence all IQ samples reports had the same handle value which
was zero.
Since the handle is related with ll_sync_set pointer the handle
value may not be set in LLL.
The best place to set handle value is thread context where
bt_hci_evt_le_connectionless_iq_report is prepared.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing code responsible for handling of allowed CTE types
in HCI_LE_Periodic_Advertising_Create_Sync command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Introduce Kconfig for Read ISO Link Quality command. Support for the
command is optional according to the specification.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Reorder variable declarations in HCI command handlers of ISO-related
commands to conform to reverse Christmas tree style.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix use of handle field in HCI command handling for some ISO-related
commands. The response buffer may reuse the command buffer. Therefore,
the handle field must not be copied directly from the command to the
response.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Set bits for ISO-related supported commands depending on selected
features and adjust compilation guards for the respective handler
functions.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix incorrect calculation of received common extended header
length. Due to this a zero length advertising data is
reported in Extended Advertising and Periodic Advertising
report as one byte AD data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising PDUs are now dispatched immediately one by one
(i.e. without list of PDUs as when flushed from aux context) so we
do not need to iterate such a list.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA, TargetA, ADI and SyncInfo are RFU in periodic advertising PDUs so
we should ignore them when present in PDU.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
There were missing commands in local supported commands list that
are related with connectionless direction finding.
The commands are implemented but they haven't been added
to HCI_Read_Local_Supported_Commands list.
The commit fixes that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add check to validate PHY value in the Auxiliary Pointer
structure in the common extended header format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add functions that handle enable CTE request control procedure
request from host.
Implementation of ll_df_set_conn_cte_req_enable in ULL is partial.
It will be integrated with refactored implementation of control
procedures.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix scan_data_status value from being incorrected OR-ed with
the advertising data status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to traverse the Extended Active Scanned
advertising PDUs, generate the Scannable Advertising and
Scan Response Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Active Scanning hold back the received PDUs in
a linked list and send it to HCI together so that fields
present across these PDUs can be aggregated for generating
the LE Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Flush the scanned advertising PDUs to HCI while receiving
the scan response PDU when Extended Active scanning.
This reverts earlier implementation to remember the
advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Extended Active Scanning and generation of
Extended Advertising Report with Scan Response event type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When generating LE Extended Advertising Report the device
address can be either in primary or auxiliary channel PDU,
do not overwrite resolving list index if present in primary
channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core spec 5.2 requires to provide CTE type in
periodic advertising report.
The implementation of le_per_adv_sync_report assigned
value zero to be default CTE type. The assigned value
in Bluetooth Core spec 5.2 means "AoA Constant Tone
Extension". In case there is no CTE attached to periodic
advertising PDU, CTE type should contain value 0xFF.
This commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add the check for mixed use of Legacy vs Extended HCI
commands for Periodic Advertising related HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising report to set the directed bit in
the event type when receiving directed non-connectable
advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks for invalid PHYs supplied to HCI LE Extended Scan
Parameters and LE Extended Create Connection commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use macros to access SCA and Channel Map fields in the Sync
Info structure in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds support to allow advertising PDUs to be linked which is
required to send advertising trains, i.e. AUX_CHAIN_IND.
PDUs are linked with a simple single-linked list, the pointer to next
PDU is stored at the very end of PDU buffer. This prevents it from
being overwritten if PDU is modified and allows for build time offset
calculation.
There are few helpers added to make handling easier, e.g.:
- get next linked PDU
- get last linked PDU
- link one PDU to another
- link PDU at the end
- release all linked PDUs (except for 1st)
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix wrong channel index send by controller in connectionless
IQ samples report. Former implementation reported value from
lll->data_chan_id which is not valid channel index.
Updated implementation reports value stored in IQ samples receive
node during periodic scanning event preparation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
