Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
This fixes an issue where if timestamp == service_due_timestamp,
we don't call the periodic service. Then the following call to
engine_next_service_timeout_ms() returns 0 because the service
is still due and lwm2m_engine_service() is called again.
This process repeats several times until the value of
k_uptime_get() changes and then the work is finally handled.
Previously, the resolution of k_uptime_get() was in ms. A recent
change to this API defaults Zephyr so that the resolution is
set via CONFIG_SYS_CLOCK_TICKS_PER_SEC (default 100).
This means the value of k_uptime_get() only changes every 10ms.
Reported-by: Github User pieterjanc
Signed-off-by: Michael Scott <mike@foundries.io>
"It's a Trap!" -- Admiral Ackbar
When moving to the BSD-socket APIs, the original thread running LwM2M
periodic services such as observes and lifetime updates, was replaced
with a re-occuring workqueue job. To save the overhead of creating a
new thread, I used the system workqueue for these jobs.
This was a mistake. If these jobs hit a semaphore or wait for some
reason, it cannot be prempted due to the priority of the system work
queue.
Let's instead add this service handling to the thread that we already
use for polling sockets. This also removes a configuration issue where
the system workqueue stack size needed to be increased. This can now
be adjusted via the LWM2M_ENGINE_STACK_SIZE knob.
Directly fixes semaphore usage in the socket-based DNS code.
This was introduced as a bugfix for non-responsive DNS server hanging
the Zephyr device forever. However, this probably fixes randomly
seeming hangs on the device.
Signed-off-by: Michael Scott <mike@foundries.io>
Normally, this bug wasn't apparent as the value is type-casted
to a float32/64 type. However, once we start persisting these
values they need the correct length.
Signed-off-by: Michael Scott <mike@foundries.io>
When a context is closed to a server, we should clean up any
existing observes along with it. Otherwise these will try to fire
afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
send() returns -1 upon error and sets errno appropriately. Let's
not bother saving the return code and instead share errno back
to the user.
Signed-off-by: Michael Scott <mike@foundries.io>
Errno value is only significant when `recvfrom` function indicated an
error (by returning -1). We should not depend on it's value if no error
is notified.
As the return value of `recvfrom` is already checked, misused errno
verification can simply be removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
We are using msg->cpkt.pkt as the net_pkt pointer in the call to
net_app_send_pkt(). Let's keep the code clean and not expose
ourselves to "out of order" issues, by also using msg->cpkt.pkt
in the error handling unref call.
Signed-off-by: Michael Scott <mike@foundries.io>
During the retransmit cycle we take ref on the outgoing packet,
only to immediately unref it. Originally, this was to make sure
the net_context handling didn't get rid of the packet when
sendto() is called. But after checking, the ref counter is never
in danger of going to 0 at this point in the code, so the
added ref handling is useless.
Signed-off-by: Michael Scott <mike@foundries.io>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Currently, we only save the resource id of the incoming path setting.
In the future, we will need to change other values in order to process
multi-instance READ operations.
Let's save and restore the entire path only at the beginning and end
of processing.
Signed-off-by: Michael Scott <mike@foundries.io>
Optimize the resource processing loop to avoid extra
assignments before checking if we need to process the
actual resource.
Signed-off-by: Michael Scott <mike@foundries.io>
The put_begin / put_end calls are to be used at the very beginning
and end of processing a READ op. Let's correct that logic.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters are becoming too complex for a simple do_read_op()
function to handle all in one place. Also, more data formatters are
going to be added for LwM2M v1.1 support in the future.
In order for data formatters to perform internal setup or deny
invalid requests (specific to the formatter's logic), let's
establish do_read_op_* functions in each formatter.
Once the internal processing is done, they can call back into the
more generic lwm2m_perform_read_op function.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's correct the starting logic in do_read_op() to not assume
a default value of 0 will be present for the first object, when
reading multiple objects.
Signed-off-by: Michael Scott <mike@foundries.io>
The object instance list isn't sorted by object instance id. Let's
simplify this and fix the logic in lwm2m_next_engine_obj_inst() to make
sure that we always get the NEXT object instance by value of
obj_inst_id, not just the next object instance in the list.
NOTE: This change removes the "last" object instance pointer from the
parameters of lwm2m_next_engine_obj_inst(). Some of the logic to return
a NULL value for the end of the list has to be moved back into
do_read_op().
Signed-off-by: Michael Scott <mike@foundries.io>
Remove over-complicated match_type logic in do_read_op(). Replace
MATCH_* checks with actual path->level values.
Signed-off-by: Michael Scott <mike@foundries.io>
When processing an observe request we fail to check whether a
resource has the read permission set. Let's check and if it
doesn't return -EPERM.
NOTE: Also do diligence and return -ENOENT when an object field
cannot be found while looking for the permission.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/8286
Signed-off-by: Michael Scott <mike@foundries.io>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A typo in update_attrs() was setting every observer to a PMIN of 0.
This meant we could send observer data as often as the process was
called. This is out of spec as the default minimum is 10 seconds.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The LwM2M engine thread is used for various periodic triggers.
None of these are in a critical path that requires super sensitive
timing and the current K_PRIO_COOP(7) setting was causing the
Bluetooth RX thread to have to wait too long for certain actions
to complete.
Let's lower the priority to -1 (effectively) to eliminate these
conflicts.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
