First available subcommand is for doing a send operation. Send operation
is supported by the LwM2M version 1.1.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
When lwm2m_rd_client_stop() was called and immediately
followed by lwm2m_rd_client_start() it leaked the file
handle for existing socket.
Problem can be fixed when rd_client_stop() does not
move state machine to IDLE, but instead DEREGISTER
and then allow state machine to move forward.
I added a blocking wait for rd_client_stop() because
it needs to wait for proper clean up.
I also move couple of lwm2m_engine_context_close() to
set_sm_state() event handler or similarly in lwm2m_engine.c
there was couple of places where context was not properly
cleaned.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fixed wrong initialized base name objed id.
Base name was added to every object instance.
Fix will save message size.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M specification is only mentioning BASE64 encoding but SenML-JSON
specification is talking about BASE64URL encoding.
This change is silently accepting both formats and automatically pads the
data if padding is dropped.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LWM2M Client Sample with DTLS enabled fails because TLS_HOSTNAME is set
but MBEDTLS_X509_CRT_PARSE_C is disabled which leads to error
'net_lwm2m_engine: Failed to set TLS_HOSTNAME option: 109'
Add new field hostname_verify to let the application decide if hostname
should be checked.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
If NET_IPV4 and NET_SOCKETS_PACKET is enabled, NET_SOCKADDR_MAX_SIZE will
be bigger than the ipv4 address length.
This is a problem when DTLS is used as the address comparison will fail
because of the different length of the received and the stored address.
This is also a problem if NET_IPV6 and NET_IPV4 is enabled and the remote
address is a ipv4 address
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
Use defines instead of hardcoded strings to avoid future errors if the
values would change.
Signed-off-by: Andreas Pettersson <andreaspettersson95@gmail.com>
Sometimes message is being reset from multiple locations in code.
If message has already been reset, pointer to context is invalid.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Read operation must return empty payload when read /object_id
if there is no created object instances.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Added support for Composite observation for LwM2M v1.1.
Updated current Observation node to support linked path list.
Rename typos lwm_ to lwm2m_.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Removed to store pmin and pmax at oberservation node structure and
use attribute list store for calculate time for next Notification.
Observation class use timestamp for triggering notification based on
resource update which use pmin and default pmax behaviour.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When queue mode is enabled, state machine will enter state
ENGINE_REGISTRATION_DONE_RX_OFF. This state needs to be
taken into account during registration update to send
correct event.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
SenML Json support dynamical basename for composite operation.
Changes simplify base name generation and compres message better.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It depends from a content formatter is there need to put constructs
with a path level deeper than object instance. In other words with
resource- or resource-instance-level.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Makes possible to read a single resource instance at a time with
plaint text, JSON and TLV content formats.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
LwM2M version 1.1 will select SenML Json for default content format.
Version 1.0 will use TLV format.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M engine Send operation support /dp.
Send operation based on Composite Read functionality
which is not enabled at engine side like composite write.
Added Kconfig configurable for composite read path list size.
Created generic Read object instance which is shared between
general read and Composite Read operation.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M SenML JSON contain format support for Read / Write operation.
Added Kconfig configurable for enable SenML JSON format.
LwM2m read validate read operation and report out of memory.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
In case an individual resource is being discovered, the LwM2M client
should not only fill the attributes assinged at the resource level, but
also the ones inherited from the object and object instance levels.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M 1.1 allows to write attributes for resource instances as well.
Resource instance level attributes need also to be taken into
consideration when adding/updating observers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M adds Resource Instance reporting in Discovery response, along with
attributes assinged at the Resource Instance level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is a bare minimal changes to tell the server that we are using
LwM2M 1.1 version. Queue-mode parameter has changed between 1.0 and
1.1 so it must be changed in the same time.
Other 1.1 features may follow on separate commits. This is still
an experimental feature that allows developing and testing of
1.1 features.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This far time values have been synonymous to integer values. Content
formats like CBOR do use different representation.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Added support for Portfolio object support because LwM2M v1.1 conformance
test requirement that. This object is only for conformance test purposing.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Do not retransmit a message that just has been send successfully.
This case can in particular happen quite frequently if the modem
connection/throughput is quite bad and so there is a high latency.
A message that has to be acknowledged is scheduled for retransmission.
Before retransmission a ack for this message is received that will
cause a reset of the original message. In this case you see a
"LwM2M message is invalid" error message.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Read operation must return empty payload when read /object_id
if there is no created object instances.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
many functions in the lwm2m librarys api take a pathstr argument
that is never written to, so make it const
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
The path was erroneously pointing to update state
resource instead of update result causing a wrong
resource value to be updated.
Signed-off-by: Jarno Lamsa <jarno.lamsa@nordicsemi.no>
Firmware Update Protocol Support resource initialization
has been left out in #41402.
Initialise the resource in object creation function.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Calling lwm2m_rd_client_stop causes the client context to be closed.
Doing this from arbitrary thread other than internal lwm2m engine thread
causes racing condition on lwm2m engine context pointers.
Fixes#42358
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Server Object SSID should only have Read access.
LightweightM2M-1.1-int-256 confirmance test validate
that write operation to SSID should return error.
Overwrite SSID affect dead block for lwm2m engine and
only reset will heal.
Fix by adding bootstrap overwrite access for Security and
Server object when bootstrap is active.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
