Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit adds CSIS command to change type of SIRK.
This is needed for CSIS/SR/SP/BV-05-C test case.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There was a make-shift mutex implementation added to thrift
while waiting for C++11 thread support in the SDK. This was
fairly racey and would cause issues in CI regularly.
Make the tests build-only for now until C++11 thread, mutex,
etc support is stabilized.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Remove explicit timeouts which are either the same as the
default one or smaller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test keeps its own partial way of running tests.
Let's have it kill stuck processes in the same way as
the rest (sending another kill 5 seconds after, and printing
a message about what happened)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To give an idea of which tests are taking
too long either on CI or locally.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Create the folder for the results if it does not exist.
Fixes these warnings in CI:
```
touch: cannot touch '/__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml': No such file or directory
realpath: /__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml: No such file or directory
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When thread stack is defined as an array, K_THREAD_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone thread stack has its size calculated by
Z_THREAD_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_THREAD_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When kernel stack is defined as an array, K_KERNEL_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone kernel stack has its size calculated by
Z_KERNEL_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_KERNEL_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The reserved flash space for coredump is 4KB. However,
the dump_stack itself is larger than 4KB due to kernel stack
size adjustment. So enlarge the space for another page.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since there is a K_THREAD_STACK_LEN, its kernel counterpart
should also be prefixed with K_ for consistency.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The syscall name has _impl postfix so adjusting the stub
name.
zephyr-sdk-0.16.5-1/x86_64-zephyr-elf/bin/../lib/gcc/
x86_64-zephyr-elf/12.2.0/../../../../x86_64-zephyr-elf/bin/ld.bfd:
app/libapp.a(lwm2m_engine.c.obj): in function `zsock_fcntl_impl':
.../syscalls/socket.h:363: undefined reference to `z_impl_zsock_fcntl_impl'
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The setting is deprecated so change the code to either use the
native zsock_* API or enable POSIX_API to use the BSD socket API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The test expects to use various POSIX APIs so enable the config.
Enabling POSIX_API requires also increase of max file descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This test is an attempt at formalizing at least part of the behavior
described in commit 6a79c3deae.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When setting a name to a network interface, verify that no other
interface has the same name as that would make very difficult to
select an interface by a name.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The DHT20 sensor is a temperature and humidity sensor that uses I2C to
communicate with a microcontroller. The DHT20 sensor is Aosong.
use standard crc
update description to add reference to AHT20 and AM2301B
clean code, use defines and bit manipulation
add dht20 to i2c test suite for build tests
update bit manipulation
use more defines instead of raw numbers
add bindings to allow aht20 or am2301b to be used in devicetree
in all 3 cases, the same dht20.c driver is compiled
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Uncomment the check for sockatmark() to ensure that the function
is declared in sys/socket.h, as a stub implementation was added
in the previous commit.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Uncomment netdb.h tests now that we have an implementation and
can check for the existence of e.g. hostent, netent, protoent,
and servent structure fields, as well as associated accessor
functions.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Uncomment net/if.h tests in tests/posix/headers since we now
have an implementation and can check for the existence of
structures, functions, etc.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The log subsystem defines LOG_ERR as a macro, which conflicts
with the standard POSIX LOG_ERR log level (3).
Reorder includes to avoid errors.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
