The nxp,imx-csi node was removed from dts in a previous commit
which caused a build failure / regression in CI.
Use DEVICE_DT_GET_ANY() instead of DEVICE_DT_GET_ONE(), since
the latter requires a DT node present, while the former does
not and returns NULL if no such compat exists.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This is a soc/board integration for the MediaTek Audio DSP device on
the MT8195 SOC, along with a Zephyr mtk_adsp soc integration that will
work to support similar 8186 and 8188 device shortly.
A python loader (similar to cavsload.py) is included that will run in
developer mode on current chromebooks (an HP x360 13b-ca000 was
tested) with an unmodified kernel.
Signed-off-by: Andy Ross <andyross@google.com>
These devices have a somewhat odd hybrid design, with a free-running
64 bit up counter but no comparator. Instead interrupts are triggered
by (one of an array of) 32 bit down counters with reset (a-la SysTick,
but without the 24 bit precision issues). The combination actually
results in a fairly simple driver as we can skip the comparator
rounding math.
Signed-off-by: Andy Ross <andyross@google.com>
Add an interrupt controller driver for this device. This is an
extremely simple second level controller with per-interrupt-bit
registers for "enable" and "status". There is no internal latching,
so no "clear/ACK" process is needed.
Signed-off-by: Andy Ross <andyross@google.com>
Add a shield for DVP FPC 24-pins mt9m114 camera modules. These camera
modules are supported on i.MX RT10xx series, for example.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The mt9m114 camera module is not always attached to this board. Camera
stuffs should go into a seperate overlay / shield. Also, the CSI should
be enabled only if there is a camera sensor attached to it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add RISC-V architecture specific atomic instructions, not present in
atomic_builtin.h
Signed-off-by: Aleksandar Cecaric <aleksandar.cecaric@nextsilicon.com>
- Optimize slot sizes for MCUBoot swap move algorithm
for mimxrt1010/15/20/24/40/50/60/64 boards.
- Save up to 64 wasted sectors.
- Use DT_SIZE_K/M macros for slot sizes.
- Fix partition size errors.
- Limit mcuboot max size to 128KB (was 256KB).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When RxOnWhenIdle is set to False, turn the radio off
if no operation is ongoing in order to save power.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This account is my corporate account which I will lose access to. Change
to my personal account instead.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Add test suite using python-can for testing Controller Area Network (CAN)
communication between a host PC and a device under test running Zephyr.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Optionally bypass the shell when printing received CAN frames in order not
to break up the line containing the frame. This allows for parsing the
printed CAN frames using Twisters pytest and console harnesses with the
cost of the shell ignoring input while the frame is being printed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In the current implementation, the LLEXT linker will only apply
relocations targeting a given symbol if it has a specfic symbol type.
This is overzealous and causes issues on some platforms, as some symbols
that need to be relocated are skipped due to being of a "bad" type.
Ignore the symbol type when performing relocation to solve this problem,
but also add checks to ensure we don't attempt to relocate symbols with
an invalid section index. If such a relocation is found, return an error
instead of ignoring the relocation entry to ensure that it is impossible
to execute code from a (partially) unrelocated LLEXT.
Also remove all hacks added to circumvent this issue:
* qemu_cortex_r5 exclusion from test cases
* unnecessary exclusion of some flags when building with LLEXT EDK
Fixes#72832.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The RA4M1 Clicker is a basic development board for the Renesas RA4M1
Microcontroller. The board contains J-Link on board, two LEDs and push
buttons and several headers for interfacing with external devices.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
- Adds -U upgrade flag to the install requirements command.
- Fixes a possible documentation generation issue,
reported in https://github.com/zephyrproject-rtos/zephyr/issues/73082
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
In an effort to shave off code size, remove out-of-the-box
enabling of crypto features (except SHA-256).
Configurations are adjusted to enable what they need.
Bonuses:
- When enabled, AES now defaults to using a smaller version
(`CONFIG_MBEDTLS_AES_ROM_TABLES` isn't default enabled anymore,
and if enabled, `CONFIG_MBEDTLS_AES_FEWER_TABLES` defaults to y).
- Conditions around Mbed TLS Kconfig options have been improved
to reflect the reality of the dependencies.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Included the nxp_ke1xz.dtsi file to use the same peripheral info,
and overwrite it for different peripherals
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This PR corrects the base addresses and region names of some memories
present in the MPS3-AN547 hardware.
Fixes#71920
Signed-off-by: Manuel Loew <manuel.loew.infineon@gmail.com>
Add DMA channels at SOC level for the LPC55S6x series SOCs, as the dma
requests are SOC specific properties and do not need to be modified at
the board level. Remove any DMA request definitions present at the board
level for the LPC55S69 evaluation board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some IPv4/IPv6 functions were ifdef-sliced internally, despite being
compiled in conditionally in top-level #ifdef block under the same
condition.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In some cases the comment after #endif did not match the opening #if, in
some cases it was missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow user to specify resource string using wildcard characters
so that multiple URL paths can be served with just one handler.
Fixes#73367
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Modify the BAP and PBP samples to start with the profile name
(BAP or PBP) and the role of the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP broadcast source sample did not properly use
parentheses for the macro, potentially causing issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is no point in having heap validation enabled but without asserts,
as nothing is reported to the user.
Add this dependency to make sure this option is useful.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Currently calls to these two functions fail unnecessarily when
CONFIG_BT_SMP is disabled. This fix allows identity resets
without having the BT_SMP stack enabled. The primary use case
is enabling random mac address rotation for privacy in memory
constrained SOCs. Fixes#73313
Signed-off-by: Patrick Patel <ppatel@micro-design.com>
Define the configuration to run the code_relocation
application on the external memory octo flash
of the stm32u585 or stm32h7b3i disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change is aborting the memoryMapped mode of the octo-flash
before erasing or writing the NOR. Operations are performed in
command mode.
Reading is always performed in MemoryMapped mode (memcopy)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable the MemoryMapped Mode for the stm32 octoFlash driver
Configure the Flash in MemoryMapped to use in XiP mode.
With this mode the erase and write are not supported.
Address and size are given by the DTS register property.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
