Setting the extended advertiser as default advertiser
to improve both preformence and reliability.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Move mesh shell related options to a new file to avoid cluttering of
the main Bluetooth Mesh Kconfig file when extending it with new options.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Alters several provisioning related features to allow commands to be
functional with application defined Provisioning properties &
capabilities.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds Kconfig option for the Mesh Shell Health server.
The shell implementation of Health Server test commands is
dependent on the user adding and initializing the shell Health
Server instance in their application to make the commands functional.
To prevent any confussion about how these commands work, a Kconfig
option has been added to allow conditional compilation of these
commands. In this way the user must actively enable this feature, making
the conditional requirements more clear.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Sharing the same pool for both, local and relayed messages has some
disadwantages. In a high-traffic environment the relayed messages may
occupy the whole pool without letting the node to send own messages,
neither to process segmented messages. The vice versa situation is
possible when local messages takes the whole pool so that the node is
not able to relay other messages. Another thing is that it doesn't let
to controll amount of local and relayed messages that the node can send
at once. Controlling the number of messages that the node can relay may
help to reduce the message latency.
This change adds separate net_buf_pool for the relayed messages that
helps to avoid problems described above.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The CDB module is a mandatory part of provisioning features in BTM, and
can not be regarded as experimental anymore.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The current implementation of provisioning features is dependent on CDB
to compile, which is reflected poorly in the Kconfig options for mesh.
This commit alters the Kconfig options for provisioning to be dependent
on the CDB option to compile.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Additional uncontrolled delay for transmitting segack affects throughput
of the segmented messages. Though the best throughput can be achieved
with the smallest allowed values, move them to Kconfig option so that
the segack delay can be controlled by a user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
With extended advertiser a precision of transmission becomes high.
The first frame is emitted quite quickly. The scanner latency
config option to enable scanner a bit in advance is not sufficient.
Sometimes replays on Friend Poll are lost.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Introduce configuration options for chosen RPL implementations.
This will allow introducing alternate persistent storage schemes
for the replay protection list.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This updates the default proxy filter size to 16. Previous value of 3
is too less for the most practical uses and demos. The default proxy
filter type is accept list type and in this mode proxy server rejects
incoming messages from source addresses not in the accept list. The
addresses are added to the accept list when proxy client sends
messages to unicast addresses or manually adds certain addresses to
the accept list. Once this list is full more addresses cannot be added.
This also updates the default network message cache size to 32. The
network message cache helps in preventing duplicate messages getting
repeatedly relayed and helps in reducing unnecessary network traffic.
Previous value of 10 is quite less for most usecases and makes the
node appear to generate much more traffic in mixed network. The
updated value should suffice for most use cases.
Additional explannation is added in Kconfig to help users understand
the significance of this setting.
These two changes result in 176 bytes of additional RAM usage in mesh
samples.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adds a Kconfig option for setting the Config Client and Health Client
timeout. Updates updates the default for Config Client to allow
reception of full sized message from a similar peer device at zero hops.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
With BT_SETTINGS disabled, or when using an indefinite
RPL_STORE_TIMEOUT and not storing the RPL, the device will not be able
to follow the replay protection required by the spec. This adds a
warning about this.
Signed-off-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since `CONFIG_BT_MESH_PB_GATT` represent to pb-gatt-srv.
We use `CONFIG_BT_MESH_PB_GATT_COMMON` to represent common.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
As use for simple message with no-segment send or receive.
This will be useful for ram-resource-constrained device.
such as bbc-microbit-v1.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This PR add multi advertising sets for bluetooth mesh adv bearer.
At the present, the local mesh network occupy single advertising.
And GATT Services Advertising use a single advertising, if support.
One or more advertising sets maybe used by relay node.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/bluetooth and drivers/bluetooth/hci settings having
`[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Debug configuration for prov and prov_device has been split
since prov general modul and it is used for provisioner as well.
It is not necessary to enable prov_device debugging
to debug provisioner.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add seperate config to control whether device name include in
pb-gatt advertising scan response data.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Added bt_mesh_msg_send() which can be used by the application to
directly send model layer messages without local instantiation of
related models. Also added bt_mesh_msg_cb_set() which allows the
application to recieve mesh model layer messages without local
instantiation of related models.
Added bt_mesh_has_addr() which returns a bool. For unicast addresses,
this returns whether or not bt_mesh_elem_find() was successfull. If the
above mentioned bt_mesh_msg_cb_set() has been used by the application to
set a message callback, this returns true so that the stack attempts to
push every model message up to the application via the callback. If no
callback has been set, group addresses are searched to see if the stack
should pass the message up the stack to an instantiated model.
These changes allow applications that do not or can not instantiate
models to interface with models in a mesh network. This is applicable to
applications which act as a Bluetooth mesh gateway, sniffer, debugger,
network monitoring, non-mesh relay/extender, etc.
In app_keys.c friend.c net.c bt_mesh_elem_find() is used only to
determine the existance of an address. The full return value of
bt_mesh_elem_find() is unecessary and so was replaced by the above
mentioned bt_mesh_has_addr() function in these instances.
Simplified bt_mesh_elem_find() by removing the search through group
address. Since the above mentioned bt_mesh_has_addr() function handles
instances where group addresses must be searched, it was no longer
necessary to preform this search in this function.
Signed-off-by: Bud Wandinger <bud@budkoembedded.ca>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service
and Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename `CONFIG_BT_MESH_PROXY` to `CONFIG_BT_MESH_GATT`.
Create an additional promptless entry
`CONFIG_BT_MESH_GATT_SERVER` that selects
`CONFIG_BT_MESH_GATT` and is selected by
`CONFIG_BT_MESH_GATT_PROXY` or `CONFIG_BT_MESH_PB_GATT`.
Create additional `CONFIG_BT_MESH_PROXY` used to represent
proxy feature (also include proxy client).
see #36343
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Bluetooth Mesh Vendor model hava company id field.
Accordin MeshPRFV1.0.1 3.7.3.1 Operation codes.
The 3-octet opcodes are used for manufacturer-specific opcodes.
The company identifiers are 16-bit values defined by the
Bluetooth SIG and are coded into the second and third octets of
the 3-octet opcodes.
Therefore, we can speed up the search process by checking whether
CID fields match, rather than comparing opcodes one by one.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The old default of 1 makes provisioner devices useless, as they can only
provision themselves before they run out of space.
Increase the default value for CONFIG_BT_MESH_CDB_NODE_COUNT to 8.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Sometimes it may be needed to know device name when proxy feature is
enabled.
This commit adds an option to include device name in scan response.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The mesh settings.c module is a giant piece of code responsible for
storing the mesh stack configuration. Such approach makes it difficult
to control the data to be stored, breaks the stack modules'
encapsulation by forcing them to reveal the internal kitchen, which
leads to unpleasant issues such as #19799.
This commit moves the responsibility of storing the configuration
to corresponding modules while keeping control of the moment of storing
the configuration and of starting the stack after the settingss loading
is completed.
This doesn't introduce any abstraction between the mesh settings.c and
other modules as it will add more complexity and overhead than necessary
for the actual task.
Fixes#19850
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for extended advertiser commands in the mesh. This doubles
throughput for common packet sending, and significantly improves timing
accuracy for the Friend and Low Power features.
The proxy module's advertisement control has been moved inside the adv
module to abstract away the different advertiser modes.
The extended advertiser mode does not need an advertising thread to
operate, and ends up with a net reduction in RAM usage.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
This is a major refactoring of the handling of the cryptographic
material of both the network and transport layers. The aim is to
encapsulate the key object manipulation, and improve overall modularity.
Pulls Applications and Subnets out of the bt_mesh and into separate
modules, with static storage types on the data. This has several
side-effects:
- The Config Server no longer operates directly on the bt_mesh.subs and
bt_mesh.apps lists, but goes through a public configuration interface,
following the pattern set in #27908.
- All iteration through the keys is done through iteration APIs
- Key resolution on RX and TX is centralized.
- Changes to the keys triggers events the other modules can register
handlers for.
- Friendship credentials are stored in the lpn and friend structures.
Part of #27842.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Many #ifdefs can be removed, but the UNPROV_BEACON_INT Kconfig
variable needs to be also made available also. This is done by making
its prompt (user selectability) optional rather than the option
itself. This approach is fine for "parameter style" options, but
should probably not be used for feature enabling options.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Changes the local network interface to exclusively handle packets for
the local interface, duplicating the buffers in the process.
The loopback mechanism now operates its own packet pool for the local
interface queue. The loopback is moved ahead of encryption, allowing the
local interface packets to go back up the stack without network crypto,
saving a full round of encrypt/decrypt for self-send.
Packets for group addresses the local node subscribes to are now
duplicated, with one unencrypted variant going into the network
queue, and the network bound packets following the regular path to the
advertiser.
Introduces one new configuration for setting the number of loopback
buffers.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
