The test was executing the expected functions
out of order. I have created a config functions
and explicitly declared them to be setup functions
for this ZTest framework.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The I2S Speed test attempted to find a device
via the Label Property of the node. I have updated
the code to search for the nodelabel instead.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Adding overlay files that give an alias name to the
i2s node that is equivalent to the alias in the
i2s speed test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Test had by accident an early return and after removal case was failing
in certain configurations. It was failing because set of long messages
was not fitting into the logging buffer used in the test. Fixed the
test by adding more frequent processing between the messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
At least one static analysis tool is flagging a potential NULL
derefence in sys_clock_announce()'s tick processing loop where the
routine 'first()' is concerned. In practice, this does not occur as
...
1. The code in question is protected by a spinlock.
2. 'first()' does not change the contents of anything.
The code has consequently been tweaked to prevent similar such false
positives in the future.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
stm32cubeprogrammer runner takes a --reset-mode argument to specify the
type of reset used in the flashing process.
Though, argparse default configuration in python allows shortened command
arguments and it happened that --reset was used on most boards instead
of --reset-mode.
This argparse configuration is being changed in order to prevent shortened
command args (see #53495). As a consequence all board configs using
--reset should be updated to use the full length version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The IPv4 autoconfiguration feature relies on the fact, that autoconf
ARP packets are always prepared by the ARP module. After recent ARP
refactoring though that could no longer be the case due to packet
queueing mechanism. This could lead to net pkt leaks in the autoconf
module.
Fix this by skipping the pending packet queue for autoconf packets.
Since for autoconf ARP requests there's no really a pending packet
to queue, it can be safely avoided. This results in the ARP request
being always sent for the autoconf case, preventing the packet leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check data buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to res data length when data type
is fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes possible ASE state race condition. The notification is sent
immediately once the ASE state changed that eliminates a situation where
the state was changed by user action (API function call) when the state
was not yet notified to the remote Unicast Client.
Fixes: BAP/USR/SCC/BV-158-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Current divisor is 10000000 (should be 1000000).
For example, ESP32_CLK_CPU_240M / 10000000 == 24 MHz (incorrect).
Signed-off-by: Chris Wilson <christopher.david.wilson@gmail.com>
Check return values from lwm2m_rd_client_pause() and
lwm2m_rd_client_resume() when engine thread suspend is requested.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
From 8.3.3.4.2.1 PE_SNK_Send_Soft_Reset State, Error Recovery
should be performed if a Protocol Error happens during a Data
Role Swap.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Build time check that the number of states initialized
in the state machine array matches the number of enums
used to index said array.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
This helper function would be used by Sensor SubSystem(senss).
When the unit is 1 micro degree, the range that the int32_t can
represent is +/-2147.483 degrees. In order to increase this range,
here we use 10 micro degrees as the unit.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Accurate timekeeping is something that is often taken for granted.
However, reliability of timekeeping code is critical for most core
and subsystem code. Furthermore, Many higher-level timekeeping
utilities in Zephyr work off of ticks but there is no way to modify
ticks directly which would require either unnecessary delays in
test code or non-ideal compromises in test coverage.
Since timekeeping is so critical, there should be as few barriers
to testing timekeeping code as possible, while preserving
integrity of the kernel's public interface.
With this, we expose `sys_clock_tick_set()` as a system call only
when `CONFIG_ZTEST` is set, declared within the ztest framework.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The previous method used to calculate seconds in `clock_gettime()`
seemed to have an inaccuracy that grew with time causing the
seconds to be off by an order of magnitude when ticks would roll
over.
This change fixes the method used to calculate seconds.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
When PM is disabled, it does not make sense to return ENOSYS,
pm_device_runtime_enable/disable should be treated as noop functions.
When PM is disabled, those functions are not supposed to be implemented.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change for addressing the below symptoms.
Two FW images have different h2ram offset settings.
Jumping to each other will cause offset setting errors.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
At default, IBF (input buffer full) interrupt status will be cleared
after reading keyboard data input register (KBHIDIR) in ISR.
For request to clear OBF (output buffer full), we need to enable clear
mode. In the mode, IBF status cannot be cleared by reading KBHIDIR
register. It means that if AP output data to 60h/64h port during the
mode enable, IBF interrupt will keep triggering until the watchdog is
reset. This patch addresses this issue.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Add a sample to put the part into Deep power down mode by
setting the state to PM_STATE_SOFT_OFF.
Wakup the part using an RTC alarm.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The FlexSPI pins are reconfigured before going into Deep
Sleep mode to save power. The requires enabling
CONFIG_PM_DEVICE so we can access the flexspi pin settings.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add code to setup the PMIC voltages during low
power modes
2. Add Zephyr power states that are supported to
device tree
3. Add low power pin configration for Flash pins
to pinctrl
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Support Sleep, Deep Sleep and Deep Power down modes
2. Enable the MEMC FlexSPI driver when using device power
management so we can reconfigure the FlexSPI pins to
save power. The MEMC FlexSPI driver is enabled when we
enable the Flash subsystem, however we would like to
reconfigure the FlexSPI pins even when the Flash driver
is disabled, hence MEMC is selected when PM_DEVICE
is turned on.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add a YAMLLint compliance check that uses the yamllint package to report
linting error on YAML files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Following updates previously done for other drivers, rename all
occurrences of S32 to NXP S32 to avoid ambiguity.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Following updates previously done for other drivers, rename all
occurrences of S32 to NXP S32 to avoid ambiguity.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
