As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This macro expands to DT_STRING_TOKEN if property exists, otherwise
falls back to default value.
Helpful when a non-required enum binding doesn't mention a default
value, but a default value makes sense to be set in the code.
Including DT_INST_STRING_TOKEN_OR and test code.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
I2C clock and I2C gpio could be on same gpio group.
Remove assertion that required them to be on different
group.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
rename IMX_CCM_UART_CLK to IMX_CCM_UART4_CLK and
IMX_CCM_UART2_CLK a53 dtsi.
This was missed in a previsous patch set.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes ISO data path setup that shall be done for enabled
directions only and removes usage of Path ID = 0xFF which is RFU value.
As per Core 5.3 Vol 4, Part E, 7.8.109
"If the Host attempts to set an output data path using a connection handle
that is for an Isochronous Broadcaster, for an input data path on a
Synchronized Receiver, or for a data path for the direction on a
unidirectional CIS where BN is set to 0, the Controller shall return the
error code Command Disallowed (0x0C)."
Fixes: #43190
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Increase main thread stack size so that the sample can be run on
nrf52832 and nrf52840 DKs.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The capabilities callback did not provide information about
the type of the endpoint being configured, making it
impossible for the application to determine if it is a
sink or source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast client would set the QoS reversed, as the
client should configure it TX parameters for SINK
and RX parameters for source, where it did it the other
way around.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove functions and and macro uses that otherwise
determined the direction of an audio stream, and instead
use the direction (dir) field of the endpoint instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Audio streams as defined by the BAP spec does not
support bidirectional audio streams. This commit
updates the API and implementation to match that.
The use a bidirectional CIS with 2 audio stream will
be added in a future commit.
This removes the _IN_ and _OUT_ and _INOUT_ QOS
values, as well as the direction of the codec QOS
struct.
To keep direction for internal use, the direction
has been added to the endpoint struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS client implementation
This is a standalone implementation that
needs to be (heavily) modified for the
broadcast assistant role in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS as a standalone service. The service is
used for the scan delegator role, which has not been
fully implemented yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Long double test fails on riscv32 for unknown reason. Previously,
testcase.yaml was excluding whole test. Removed that and added
skipping in the code so that rest of the suite is executed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Reworked test to use different approach for C++ testing.
Instead of hackish include of test.inc, cmake is forcing
C++ compilation on test file when C++ option is set in
test configuration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make it consistent for audio.h and capabilities.h that the
array size parameter appear after the array parameter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This enables CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY so that
the UART backend is in dictionary logging mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Improve code by using DEVICE_DT_GET_ONE instead of device_get_binding,
since the intel_vt_d device instance can be obtained at compile time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Check if the CTE was discovered by Radio peripheral should be
done with use of CTEPRESENT event. Samples count should not
be used for that purpose. If samples count is a value different
than zero for PDUs that don't have CTE, unwanted IQ samples
report will be generated. CTEPRESENT event is set only in case the
CTEInfo filed was correctly parsed by Radio peripheral during
PDU reception.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The function eth_stm32_hal_set_config() located in
drivers/ethernet/eth_stm32_hal.c always returns -ENOTSUP,
even if everything is fine. This commit fixes the return statement
so that the real result (ret) will be returned.
Signed-off-by: Bernd Weiberg <bernd.weiberg@siemens.com>
Don't replace destination of segmented message when acknowledgement is
received from a friend node, otherwise, when segments are retransmitted,
the destination will be used and the friend node will treat it as a new
segmented message.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Passing the zephyr build directory to the script run by
--device-serial-pty, it makes the feature of the device serial
pty more flexible.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Set up a c2_reset procedure in order to allow sequential
open/close/open calls and keep c2_reset done at init (required
for flash access).
Move reinit out of the reset procedure, so flash could be
accessed after bt_disable().
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
