Add new RT118x device, due to structure is different from rt11xx series.
Boot header also differ from rt10xx and rt11xx, so add support for boot
container.
define new container name and new container tag
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Now that the dts/bindings filter has been removed from
Devicetree Binding area, this area serves no real purpose.
Move the include/dt-bindings files to their respective areas.
Fix some of the orphaned dts/bindings paths.
Add regex filter for any binding with "zephyr" in the name to be
in the devicetree area.
Fix the imx_spc.h file being in it's own pm/ folder instead of
power/ like the other power related headers.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Previously, the `soc.c` files for the IMXRT11xx, IMXRT5xx/CM33, and
IMXRT6xx/CM33 did not register the log module. This caused build
errors when DEBUG logging was enabled, as the `power.c` file attempted
to access a non-existent SOC log module for debug messages.
This commit fixes the issue by registering the log module in the
`soc.c` files for the specified SoCs, thereby resolving the build
errors.
Signed-off-by: Apoorv Singh <apoorv.singh@gin.de>
Fix formatting for `soc.c` files for the IMXRT11xx, IMXRT5xx/CM33, and
IMXRT6xx/CM33 by running 'clang-format'.
Signed-off-by: Apoorv Singh <apoorv.singh@gin.de>
Convert NXP System Timer Module driver to a native driver.
Timer prescaler in tests is updated because short relative alarms
sometimes give false positives.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert NXP SWT watchdog driver to a native driver and extend the
SWT supported functionalities and configuration options.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert power management to native drivers retaining existing
functionalities. Presently only SoC reset support and power control
initialization is supported, but these drivers will be extended to
support power management as well.
MC_ME and MC_RGM peripherals are common enough to be reused by other NXP
S32 devices, whereas PMC has specific implementations for each SoC
series.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Split SIUL2 instance index for the MSCR and IMCR registers as required
by some pins. Pinmux macros definitions in hal_nxp must be updated
accordingly.
Fixes#76147
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Remove the ‘HAS_MCUX_ACMP’ Kconfig, and also remove it from
driver and soc Kconfig files. It is not needed since we already
depend on 'ACMP' enabled in the dt file, the 'HAS_MCUX_ACMP'
kconfig is a relic of the past before devicetree was stable.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Convert pin control, GPIO and external interrupt controller drivers
based on SIUL2 peripheral to native drivers. This must be done in a
single commit to preserve atomicity, as these drivers depend on each
other.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Initialize TCM and SRAM contents only after a destructive reset (e.g.
PoR reset). SRAM retains content during functional reset through a
hardware mechanism, therefore accesses do not cause content
corruption errors.
Fixes#75912
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
In S32K1 devices, Arm Systick clock frequency is equal to the
CPU core clock frequency, and its value can be obtained from
devicetree.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
- Added a flash runner configuration for rw, mcx, lpc, kinetis and imxrt,
used for sysbuild multi-image projects like MCUBoot.
- Solved the mass erase issue.
- The sysbuild project "west flash --erase" command caused
the mass_erase->flash_img1->reset->mass_erase->
flash_img2->reset sequence.
It was fixed to the mass_erase->flash_img1->
flash_img2->reset sequence.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Only disable TCP/UDP software checksum if the ethernet
driver enabled. This is to avoid interfere with net tests
which don't need the on board driver to function
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Setting a boolean Kconfig option default to "n" after having set it to "y"
does not make the option disabled. Instead, avoid setting default to "y"
for SoCs known not to have dedicated USB RAM.
Fixes: #73912
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- Fix flash_fill() for lpc55 and mcxnx4.
- Set FLASH_FILL_BUFFER_SIZE to the minimal size of data
which can be written to a device (by default is only 32).
- Fix the [flash_map.test_flash_area_erase_and_flatten]
failed test of tests/subsys/storage/flash_map.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Currently iterable sections as per the documentation are added with
zephyr_linker_sources(SECTIONS ...) after bss/noinit.
This commit allows putting sections after common-rom.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
set DT node as Okay in board device tree;
add board level's d-cal, txcal45dp and txcal45dm to usbphy node;
enable usb clock; set USB_STACK_USE_DEDICATED_RAM for lpc55s69 and rt685;
load usb.ld for lpc55s69 and rt685.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Convert the hci_nxp.c HCI driver to use the new HCI driver API. Also move
the driver binding under dts/bindings/bluetooth, like all other HCI driver
bindings.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The drivers should be independent after the move to the new HCI driver
API. Having them as a choice also has unexpected consequences with some
drivers being unexpectedly enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Add support for configuration of the ARM PLL on the iMXRT1170/1160
series SOCs. This PLL is used to generate the M7 core frequency, and is
an integer pll. Provide default configurations for the RT1160 and RT1170
targeting 600MHz and 1GHz respectively.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable monolithic build for all BLE apps.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
This commit introduces support for an alternate linking method in the
LLEXT subsystem, called "SLID" (short for Symbol Link Identifier),
enabled by the CONFIG_LLEXT_EXPORT_BUILTINS_BY_SLID Kconfig option.
SLID-based linking uses a unique identifier (integer) to identify
exported symbols, instead of using the symbol name as done currently.
This approach provides several benefits:
* linking is faster because the comparison operation to determine
whether we found the correct symbol in the export table is now an
integer compare, instead of a string compare
* binary size is reduced as symbol names can be dropped from the binary
* confidentiality is improved as a side-effect, as symbol names are no
longer present in the binary
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
