michaelh/zephyr
1
0
Fork 0
Code Releases Activity
63666 commits 135 branches 0 tags 678 MiB
Commit graph

12 commits

Author SHA1 Message Date
Nazar Kazakov
9713f0d47c everywhere: fix typos 
Fix a lot of typos

Signed-off-by: Nazar Kazakov <nazar.kazakov.work@gmail.com>
 2022-03-14 20:22:24 -04:00
Gerard Marull-Paretas
ae5ebe8e51 drivers: gpio: drop DEV_DATA/DEV_CFG usage 
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
 2022-01-19 18:16:02 +01:00
Ryan McClelland
ecf99abc17 drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init 
PRE_KERNEL_1 is to be used for devices that have no dependencies
and do not use kernel features, such as those that rely solely on
hardware present in the processor/SOC. This commit updates these
gpios to initialize during the PRE_KERNEL_1 rather than the
POST_KERNEL. Some SoC drivers are moved to PRE_KERNEL_2 due
to dependencies.

A lot of 'other' drivers can depend on GPIOs though phandles
(such as reset lines, data or command gpios, etc...). Most of these
drivers that would need this would come up on the POST_KERNEL,
and it's likely the driver may not be up yet as it should be defined.

Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
 2021-12-13 20:31:28 -05:00
Maureen Helm
836651b453 drivers: gpio: Refactor drivers to use shared init priority 
Refactors all of the on-chip GPIO drivers to use a shared driver class
initialization priority configuration, CONFIG_GPIO_INIT_PRIORITY, to
allow configuring GPIO drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.

Most drivers previously used CONFIG_KERNEL_INIT_PRIORITY_DEFAULT or
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, therefore the default for this new
option is the lower of the two, which means earlier initialization.

Driver-specific options for off-chip I2C- or SPI-based GPIO drivers are
left intact because they often need to be initialized at a different
priority than on-chip GPIO drivers.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
 2021-11-15 14:38:55 -05:00
Gerard Marull-Paretas
1b5542056b drivers: gpio: remove usage of device_pm_control_nop 
device_pm_control_nop is now deprecated in favour of NULL.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
 2021-04-28 10:55:35 -04:00
Kumar Gala
02703e60d9 device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE 
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
 2021-01-15 07:16:21 -06:00
Kumar Gala
569155701c drivers: gpio: Convert drivers to new DT device macros 
Convert gpio drivers to use new DT variants of the DEVICE APIs.
    DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
    DEVICE_GET -> DEVICE_DT_GET
    DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE

etc..

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
 2020-12-13 19:24:24 -05:00
Tomasz Bursztyka
4dcfb5531c isr: Normalize usage of device instance through ISR 
The goal of this patch is to replace the 'void *' parameter by 'struct
device *' if they use such variable or just 'const void *' on all
relevant ISRs

This will avoid not-so-nice const qualifier tweaks when device instances
will be constant.

Note that only the ISR passed to IRQ_CONNECT are of interest here.

In order to do so, the script fix_isr.py below is necessary:

from pathlib import Path
import subprocess
import pickle
import mmap
import sys
import re
import os

cocci_template = """
@r_fix_isr_0
@
type ret_type;
identifier P;
identifier D;
@@
-ret_type <!fn!>(void *P)
+ret_type <!fn!>(const struct device *P)
{
 ...
(
 const struct device *D = (const struct device *)P;
|
 const struct device *D = P;
)
 ...
}

@r_fix_isr_1
@
type ret_type;
identifier P;
identifier D;
@@
-ret_type <!fn!>(void *P)
+ret_type <!fn!>(const struct device *P)
{
 ...
 const struct device *D;
 ...
(
 D = (const struct device *)P;
|
 D = P;
)
 ...
}

@r_fix_isr_2
@
type ret_type;
identifier A;
@@
-ret_type <!fn!>(void *A)
+ret_type <!fn!>(const void *A)
{
 ...
}

@r_fix_isr_3
@
const struct device *D;
@@
-<!fn!>((void *)D);
+<!fn!>(D);

@r_fix_isr_4
@
type ret_type;
identifier D;
identifier P;
@@
-ret_type <!fn!>(const struct device *P)
+ret_type <!fn!>(const struct device *D)
{
 ...
(
-const struct device *D = (const struct device *)P;
|
-const struct device *D = P;
)
 ...
}

@r_fix_isr_5
@
type ret_type;
identifier D;
identifier P;
@@
-ret_type <!fn!>(const struct device *P)
+ret_type <!fn!>(const struct device *D)
{
 ...
-const struct device *D;
...
(
-D = (const struct device *)P;
|
-D = P;
)
 ...
}
"""

def find_isr(fn):
    db = []
    data = None
    start = 0

    try:
        with open(fn, 'r+') as f:
            data = str(mmap.mmap(f.fileno(), 0).read())
    except Exception as e:
        return db

    while True:
        isr = ""
        irq = data.find('IRQ_CONNECT', start)
        while irq > -1:
            p = 1
            arg = 1
            p_o = data.find('(', irq)
            if p_o < 0:
                irq = -1
                break;

            pos = p_o + 1

            while p > 0:
                if data[pos] == ')':
                    p -= 1
                elif data[pos] == '(':
                    p += 1
                elif data[pos] == ',' and p == 1:
                    arg += 1

                if arg == 3:
                    isr += data[pos]

                pos += 1

            isr = isr.strip(',\\n\\t ')
            if isr not in db and len(isr) > 0:
                db.append(isr)

            start = pos
            break

        if irq < 0:
            break

    return db

def patch_isr(fn, isr_list):
    if len(isr_list) <= 0:
        return

    for isr in isr_list:
        tmplt = cocci_template.replace('<!fn!>', isr)
        with open('/tmp/isr_fix.cocci', 'w') as f:
            f.write(tmplt)

        cmd = ['spatch', '--sp-file', '/tmp/isr_fix.cocci', '--in-place', fn]

        subprocess.run(cmd)

def process_files(path):
    if path.is_file() and path.suffix in ['.h', '.c']:
        p = str(path.parent) + '/' + path.name
        isr_list = find_isr(p)
        patch_isr(p, isr_list)
    elif path.is_dir():
        for p in path.iterdir():
            process_files(p)

if len(sys.argv) < 2:
    print("You need to provide a dir/file path")
    sys.exit(1)

process_files(Path(sys.argv[1]))

And is run: ./fix_isr.py <zephyr root directory>

Finally, some files needed manual fixes such.

Fixes #27399

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
 2020-09-02 13:48:13 +02:00
Tomasz Bursztyka
e18fcbba5a device: Const-ify all device driver instance pointers 
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.

A coccinelle rule is used for this:

@r_const_dev_1
  disable optional_qualifier
@
@@
-struct device *
+const struct device *

@r_const_dev_2
 disable optional_qualifier
@
@@
-struct device * const
+const struct device *

Fixes #27399

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
 2020-09-02 13:48:13 +02:00
Tomasz Bursztyka
98d9b01322 device: Apply driver_api/data attributes rename everywhere 
Via coccinelle:

@r_device_driver_api_and_data_1@
struct device *D;
@@
(
D->
-	driver_api
+	api
|
D->
-	driver_data
+	data
)

@r_device_driver_api_and_data_2@
expression E;
@@
(
net_if_get_device(E)->
-	driver_api
+	api
|
net_if_get_device(E)->
-	driver_data
+	data
)

And grep/sed rules for macros:

git grep -rlz 'dev)->driver_data' |
	xargs -0 sed -i 's/dev)->driver_data/dev)->data/g'

git grep -rlz 'dev->driver_data' |
	xargs -0 sed -i 's/dev->driver_data/dev->data/g'

git grep -rlz 'device->driver_data' |
	xargs -0 sed -i 's/device->driver_data/device->data/g'

Fixes #27397

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
 2020-08-11 19:30:53 +02:00
Tomasz Bursztyka
af6140cc0d device: Apply config_info rename everywhere 
Via coccinelle:

@r_device_config@
struct device *D;
@@

D->
-	config_info
+	config

And 2 grep/sed rules for macros:

git grep -rlz 'dev)->config_info' |
	xargs -0 sed -i 's/dev)->config_info/dev)->config/g'

git grep -rlz 'dev->config_info' |
	xargs -0 sed -i 's/dev->config_info/dev->config/g'

Fixes #27397

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
 2020-08-11 19:30:53 +02:00
Simon Guinot
d3dd297619 drivers: gpio: add driver for NXP LPC11U6X MCUs 
This patch adds a GPIO driver allowing to configure the GPIOs found on
the LPC11U6x MCUs.

Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
 2020-07-29 20:12:24 +02:00