This updates the default proxy filter size to 16. Previous value of 3
is too less for the most practical uses and demos. The default proxy
filter type is accept list type and in this mode proxy server rejects
incoming messages from source addresses not in the accept list. The
addresses are added to the accept list when proxy client sends
messages to unicast addresses or manually adds certain addresses to
the accept list. Once this list is full more addresses cannot be added.
This also updates the default network message cache size to 32. The
network message cache helps in preventing duplicate messages getting
repeatedly relayed and helps in reducing unnecessary network traffic.
Previous value of 10 is quite less for most usecases and makes the
node appear to generate much more traffic in mixed network. The
updated value should suffice for most use cases.
Additional explannation is added in Kconfig to help users understand
the significance of this setting.
These two changes result in 176 bytes of additional RAM usage in mesh
samples.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Updates the threads documentation to clarify the distinction between
ready and running states.
Fixes 44255
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the sample.yaml file to exclude problem architectures
from this sample project. SYS-T does not support 64-bit or
big endian architectures. The posix arch is excluded as it
is generating numerous anomolous runtime messages because it
does have the means to determine when data resides in the
rodata section.
It also converts the list of allowed platforms to lists of
platforms to use for integration testing. This helps to increase
general testing coverage.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adding configurations for enabling this sample project on cavs
platforms. This patch also contains a fix to mipi_syst library
which resolves the memory alignment issue across different
architectures.
Fixes#43344
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
For clients with both a single and multiple ATT channels:
- Read a characteristic before reading the DB hash and then retrying
- Read the DB hash and then do the reads
- Retry the reads without reading the DB hash
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
EATT channels shall be encrypted. Without encrypting the link, all
requests will be sent on the fixed ATT channel.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The sync mechanism using Babblesim backchannels picked up self-sent
messages. Use the device number as data to disambiguate messages from
other devices.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The "Database Out Of Sync" error response shall only be sent once on
each channel after a client becomes change-unaware.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This fixes the case where the client reads the DB hash without reading
another attribute first after becoming change-unaware.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Since the UART header file is included directly by application code,
an application developer including this file and only applying
-Wextra to the application source files will see many warnings.
Signed-off-by: Pete Dietl <petedietl@gmail.com>
Changes the media_proxy API to pass structs by reference instead of by
value.
Also pass structs by reference in internal functions in media player
and in media controller test.
Add pointer checks to the public API implementation where
user/application code provides structs by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the search parser to not modify the supplied parameter.
This will allow the parameter to be made 'const'.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Commit dc812539b8 ("Bluetooth: MPL: Fix use of uninitialized
command.param value") fixed the use of a potentially un-initialized
variable, by
- splitting a log statement, so that the variable is only
logged (=used) if in use (and therefore hopefully also initialized)
- setting the variable to zero if not in use
The second part is not required, as all other code in the module
checks whether the variable is in use before using it. And this
second part also prevents the parent struct from being made 'const'.
This commits removes the zeroing of the variable, so that the struct
can be made 'const'.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Changes the media control client API to pass structs by reference
instead of by value.
Also change internals of test to pass struct by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the definition of the set extended advertising data command to be
a variable array instead of hardcoded to the maximum length. This
conforms to the definition from the Bluetooth specification and allows
the corresponding code to be slightly cleaner.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This reverts commit e61c534e52, which
enabled commit message checking via the checkpatch script.
The checkpatch commit message checking is currently causing more
problems that it fixes, for example:
1. the rules that are supposed to be specific to the "header" (commit
message) are being applied to the diffs.
2. there are some rules that do not fully make sense for the Zephyr
and the way we have been doing things.
Note that we currently have the 'gitlint' checking the commit messages,
so reverting this feature does not completely take away the commit
message checking in the CI.
If we are to ever re-introduce this feature, all of the aforementioned
issues need to be addressed, and the effects and ramifications of
enabling this feature must be thoroughly analysed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The pinctrl support made usage of the 'peripheral'
property no longer required.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
ESP32/S2/C3-based boards no longer support pinmux, which was
deprecated in favor of pinctrl.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
those bindings are no more needed since pinmux was
deprecated in favor of pinctrl.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
making board initialization depend on
GPIO_INIT_PRIORITY and setting the
initialization level to APPLICATION.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
making board initialization depend on
GPIO_INIT_PRIORITY and setting the
initialization level to APPLICATION.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Clean up of pin signals definitions previously used
by the pinmux driver, now deprecated by the use of
the pinctrl API.
Refactor device tree macros usage to make usage of
SPI instances more general.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Add default pinctrl states to UART, SPI and I2C
peripherals.
I2C's pin information information is kept to
trigger the bus recovery mechanism in case of
failure.
I2C_0's default SDA pin is changed to no conflict
with SPI2's MISO pin.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
to support implementation and peripheral usage of the pinctrl
driver API.
Removes deprecated "use-iomux" property from the SPI node.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Differently from ESP32, the ESP32-S2 SoC has native
hal support to reset its own I2C FSM in case of failure.
This commit removes warnings related to unused reset
logic, which does not really apply to ESP32-S2.
It also removes code and data structures related to pin
information from the build when the target SoC supports
hardware mechanisms to reset the I2C FSM.
Finally, it checks at compile time if the preconditions
for correct bus recovery are being met.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Clean up of pin signals definitions previously used
by the pinmux driver, now deprecated by the use of
the pinctrl API.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
