Adds driven by user params buffer location to be populated by UUID
resolved data. Corresponding handlers responsible for connected and
disconnected states of L2CAP transport channel used by SDP PSM traffic
automatically allocates and unrefs such memory. Data receiving handler
performs buffer fill up.
Jira: ZEP-1112
Change-Id: I8aa97e6e69344dca0f241a4e9097acac75e14a7c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds two extra checks against invalid length of attribute payload
frame.
Jira: ZEP-1112
Change-Id: I089442a5b9631471f9f394860681f1483e021c43
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Iterates all UUID params list delivered by user. When iteration finish
release SDP client L2CAP transport channel.
Jira: ZEP-1112
Change-Id: I0602e32a5296a05719ad1385b4aff537350b3e7d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This commit introduces a very light-weight and lock-less
scheduling of the Controller's deferred function calls
called the Mayfly.
Earlier work implementation used in the Controller had an
O(n) to schedule a function in a linked list that used IRQ
lock during modification of the linked list in the
Controller's ISR executions.
Mayfly is a compile time configurable matrix of queues
where an execution context-safe queue exists between two
execution context, one being the caller and the second
being the callee. Callee(s) are run in a software interrupt
but can also be run in an OS thread.
There are minor clean ups too in this commit related to
folder structure.
Change-id: I5ff44dcee6679d2f5ce9e8437d98d6c868782f3d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Enable connection encryption setup in 3 connection
intervals. Peripheral will respond to Encryption Request
with Encryption Response in the same connection interval,
and also, will respond with Start Encryption Response PDU in
the 3rd connection interval, hence completing encryption
setup in 3 connection intervals. Encrypted data would be
transmitted as fast as in 3rd connection interval from the
connection establishment. Maximum CPU time in Radio ISR will
increase if this feature is selected.
Change-id: I16f2863fc2aaed624826505739519d4de1ac44c5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to select Tx buffer size, this
value will be returned in the HCI LE Read Buffer Size
command response.
This configuration will allow lower Tx RAM usage when
larger PDU sizes are desired in Rx direction only.
Change-Id: I5106a448d78a0754c4b0f6fa61fd5dcacd87a67c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add additional conditional compilation of code not needed
when LE Ping is disabled in Kconfig.
Change-id: Idab40b1371488e06a6f2009fb553f7655b7b86f3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Adds initial handling of SDP Service Search Attribute response PDU.
Currently attributes data are not collected. Main focus was done on
proper handling PDU continuation state to be able receive whole
requested SDP record(s) if found for given UUID.
< ACL Data TX: Handle 74 flags 0x00 dlen 24
Channel: 64 len 20 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 1 len 15
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 0
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 1 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 2 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 2 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 3 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 19
Channel: 64 len 15 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 3 len 10
Attribute bytes: 7
Continuation state: 0
Combined attribute bytes: 103
Attribute list: [len 99] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010001
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x09
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX (0x0008)
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0100
Attribute: Unknown (0x0100) [len 2]
OBEX Object Push [len 16]
Attribute: Unknown (0x0303) [len 2]
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x01
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x02
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x04
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x06
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0xff
Jira: ZEP-1112
Change-Id: Ie282782fba6ef06c6826b3e624f83c8f4c94ebbe
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
reserve parameter of bt_l2cap_create_pdu() is incorrectly passed
as timeout.
Change-Id: Ieed293f52c2e98f16f1e43c498140178703236db
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The data pointer and length was not updated before invoking the
write_rsp function therefore providing pointer to the handle.
Change-Id: I5c27ab7a793979dffb8f1f2c68def027c45f2376
Signed-off-by: Louis Caron <louis.caron@intel.com>
This should also have been net_buf_add_mem(). Otherwise the buffer
gets corrupted.
Change-Id: I4687584777f446d398182c3e8c2cde5946987da4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move code that can be executed after radio tx/rx packet ptr
has been assigned in the radio h/w.
Change-id: I9c5a34ee6bb74c1265d7871bcdf93894e3e7b190
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added code to profile radio ISR execution time and generate
an event, which can be used to populate a vendor HCI event.
This event and associated code is disabled, subsequent
patch will add kconfig to enable it.
Change-id: Ic3fa3e0f4e36829a22a25ffee039949eaae561a7
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use BT_WARN instead of BT_ASSERT to display unknown rsp in
HCI layer.
Change-id: I63c792468d9c4768f69df73395ee026a03521704
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Peer controllers not supporting LE Ping feature will
respond with unknown response PDU, handle it internally in
the controller rather than exposing it to HCI layer.
Discovered that controller was passing the unknown rsp PDU
to HCI layer when LE Ping was send to Nexus 5.
Unknown response for slave feature request was forwarded to
HCI layer, during that implementation unknown rsp for LE
ping too was getting forwarded to HCI layer.
Change-id: I4396c482e5546d78239cf41d88728de996e48d7d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This call was supposed to be net_buf_add_mem().
Change-Id: I5e4a718474905c433533fd1c1d7e8e0b7ff35739
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Stops handle data if server responds with SDP Error PDU
Jira: ZEP-1112
Change-Id: Iaddb740f71fa86384753ab32956fc69b89faeea0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds handler responsible for receiving SDP data on SDP client request.
For now simple validation are done on SDP response header data.
Jira: ZEP-1112
Change-Id: Ic6009030db34e26dfdbd57fa1b0a22f6e27b6a11
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
cid is uint16_t and L2CAP_BR_CID_DYN_END is 0xffff so doing
"cid < L2CAP_BR_CID_DYN_END" comparisong is always true resulting
in for loop not being terminated as expected. Check against cid
overflow instead. Code comment is also added for clarity.
Change-Id: I15d6d838ed8b731824e602d089d765614c96c6c1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Resets SDP client session data on related L2CAP transport channel
disconnection state. Leave the channel itself reset to L2CAP layer.
Jira: ZEP-1112
Change-Id: I4d8a8f10908f5e599ba6506470b98508869cb21b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes possible to append user UUID to context to be able later iterate
it on subsequent resolving process.
Jira: ZEP-1112
Change-Id: I193ff1cee199045c9686dc4ca200adf19db377e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Renames and refactors helper get_client_session to sdp_client_get_session
to follow existing naming convention and adds second helper creating
new SDP client session. Then simplifies using them the API implementation.
Jira: ZEP-1112
Change-Id: I6b919f521e6665a7117fa06208b3fa2ae5f77fda
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Peer sends Remote Port Negotiation command to set port
communication settings. Currently we accept all the settings
sent by remote.
If there is only one value byte in the request then current
port settings has to be returned for which we returns the
default settings defined in ETSI.
Note that RPN may be sent even before a dlc is opened.
> ACL Data RX: Handle 256 flags 0x02 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: Remote Port Negotiation Command CMD (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
< ACL Data TX: Handle 256 flags 0x00 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: Remote Port Negotiation Command RSP (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
Change-Id: I73b7d8577e7e2bc3e436f4db86a91e12db440f1f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
rfcomm_make_uih_msg() only needs session to get the role while creating
msg. This is mainly done since some commands like Test and RPN may come
even before dlc is created.
Change-Id: Ifd5a2ceaf17c20db3f00604cd2b4f1759155123e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
l2cap_br_conn_req_reply expects valid bt_l2cap_chan pointer but this
is achieved only on accept() callback. Use l2cap_br_send_conn_rsp
instead for rejecting cases where no channel was accepted. This also
makes success path being 'primary' function path ie erros all always
handled inside if() statements.
Jira: ZEP-1405
Change-Id: I890b4fcf029afce65eba4f2ebae0b1094feb007f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds validation check when 'sdp discovery' API is to be called
by client, to reuse existing connection if valid or initiate new one
if posssible to set SDP L2CAP link to remote.
Change-Id: I47ce33cb5e95cf2616f9b23712641b912ce40f37
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Added a Pending Request structure, this will keep
a track of the last sent AVDTP Singnalling Message.
This will be used to verify the response from the remote device
Memory will be allocated by the application.
Change-Id: Ic31df154b52ce9013e5039ab195a9651d1811a7a
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Adds for now stubs of handlers responsible for taking a connected and
disconnected state of SDP L2CAP channel.
Change-Id: I21b76b755168fb63f6cade5f6b0c0bab93d0a01f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds basic functionality to be able to trigger establishing outgoing
L2CAP channel to remote using as PSM SDP channel. The number of such
outgoing connections is limited by configured pool of connections.
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change-Id: Ie5428e5b1b5f5c57f473ee0adfd4621cd9fe6e3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This patch contains API's which is used to parse range of values
eg. (0,3). This patch also parses the string, reads, process and
move the buffer accordingly.
Change-Id: I8dba5b7d630f65b87967c101557c5c7ffd297dd1
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
at_get_number which converts the string into number now operates on
at_client to get the string buffer. This patch also improves API()
skip_whitespace to be operated on at_client. Also the the API's
get_cmd_value, get_response_string are updated to work with buf
increment.
Also in this patch the return type of the function str_has_prefix
is changed from 'int' to 'bool'.
Change-Id: Ia626e0d13212b84413cce0444349975f4abe1cf6
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The execution time of k_sem_give() increased slightly recently, and
since it was being called from the radio ISR this had an impact in the
deadlines not being met.
This change moves the actual call to k_sem_give() to a lower-priority
job and thus out of the ISR to avoid its execution time affecting the
ISR's timing.
Change-id: I76c82df895c6daaffef52786b0c900ee15acb0aa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
