Fixes: #28197
Update openthread to build flag changes for fixing #28197.
see zephyrproject-rtos/openthread/pull/29
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update hal_atmel to include vendor files for SAM4L SoC series.
see zephyrproject-rtos/hal_atmel/pull/13.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Updates west.yml to use modules/tee/tfm commit number
143df675557305b61f7930a50459a53a8d2bb097.
Change: make BL2 configurable.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The SX126x supports using DIO2 to control an TX switch, but only if
the switch can be operated using a single control signal. Add support
for RF switches that are wired to a GPIO instead of the radio chip
itself. This makes it possible to use RF switches that require two
control signals (one for the RX port and one for the TX port) by
wiring them to two GPIOs on the MCU.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Some implementation consist of multiple libraries to be linked instead
of one. Added possibility to pass multiple libraries. Additionally
renamed the config name as it was stateing something different than it
does.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The define for USB_DEVICE_CONFIG_ENDPOINTS erroneously divided
the DTS value for number of USB endpoints by 2.
Signed-off-by: David Leach <david.leach@nxp.com>
Update the driver implementation to use nrfx_clock and nrfx_power
drivers. Update also revisions of the hal_nordic and nrf_hw_models
modules, so that it is actually possible to use those drivers.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision, to prevent implicit-fallthrough
warnings reported in sanitycheck.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds the signing commands and the configuration required
to build a non secure image for a nucleo_l552ze_q.
Signed-off-by: Nolwenn Violette <nolwenn.violette01@st.com>
This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0
and adds new configuration option to enable two stage LFCLK start
sequence.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Expose the exFAT support option to Kconfig, so developer can
enable/disable the exFAT support on FatFs through Kconfig, no need to
touch ffconf.h.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
This commit adds a NRF_802154_MULTIPROTOCOL_SUPPORT Kconfig switch
that makes it possible to use nRF 802.15.4 radio driver in
a multi-protocol scenario.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The new LPC WWDT shim driver needs HAL update, which is provided by
the commit 7276046215cfcd4ed3d6723f16f7aeb868b0fb60.
Signed-off-by: Jiří Keresteš <jiri@kerestes.cz>
Commit 135b5ce860 was mistakenly merged with a reference to a Pull
Request instead of a SHA. Correct this so that it references a real SHA.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Different switch was used for build to allow including all shim body
in zephyr without the need for building openthread from this repo. This
allows developer to include custom OpenThread sources as part of the
application.
This change is needed as Thread is a subject of certification and
sources provided by zephyr may not necesairly pass certification or be
precertified. User is allowed to use certified OpenThread version
this way.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Update the hal_nordic module revision to include the following commits:
- CMakelists: missing "src" in one path
- nrfx_glue: Fix NRFX_PPI_GROUPS_USED_BY_BT_CTLR definition
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update hal_stm32 module in master manifest to include
latest changes around License information
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for the SX126x series of LoRa radios using the
LoRaMAC-Node HAL.
This driver currently makes the following assumptions:
* DIO1 is used as an interrupt line.
* There is an RF switch selecting between the TX and RX ports and
that switch is controlled by DIO2.
* There is either no TCXO or the TCXO is controlled by DIO3.
Specifically, the limitations above mean that modules that use GPIOs
to control the RF switch are currently not supported. Support for such
modules would need changes to the LoRaMAC-Node code.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
