There is no code to handle __syscall_inline so it is better removing
it from doxygen and checkpatch.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Put a short Kconfig overview on the index page that links to the other
Kconfig documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a new 'Setting Kconfig configuration values' page in the new Kconfig
section in 'User and Developer Guides'. Move all the information on
setting Kconfig symbols from 'Application Development' and the board
porting guide into it. The same page now covers both configuration files
and Kconfig.defconfig files.
Add links to the new page in various places to make it easy to find.
Also add some more references to the top-level Kconfig page and other
Kconfig pages.
A lot of stuff was rewritten while moving it over (the CONF_FILE
documentation has been cleaned up in particular). Some new information
has been added as well, like a tip re. minimal configurations being
helpful when making Kconfig settings permanent, and a warning re.
dependencies being ORed rather than ANDed when defining a symbol in
multiple locations.
Fixes: #20915
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SOC Definitions section had backslashes before * in globbing
'source's.
Also change the language for the code block from 'console' to 'none'.
Kconfig isn't shell.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the documentation for the menuconfig and guiconfig interfaces from
Application Development to a new Interactive Kconfig Interfaces page in
User and Developer Guides.
Also tweak Application Development to mention the configuration
interfaces earlier. It's good to encourage people to try things out in
menuconfig, because dependencies often get lost when people seldom run
it and just hand-edit files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Kconfiglib Kconfig extensions are documented in the porting guide,
which is a pretty weird place to document them. Document them under a
new page in the Kconfig section of User and Developer Guides instead.
Also remove the section about the old Zephyr Kconfig behavior for
defaults (tried last-to-first instead of first-to-last). The behavior
was changed 16 months ago (and was undocumented before that), so it
might not be that useful to mention anymore.
Piggyback misc. small language cleanups and organization nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Touch up the Kconfig preprocessor function documentation a bit and add
some more details to the example. Use the Kconfig preprocessor call
syntax instead of Python syntax in the function synopses.
Also move the preprocessor docs to a separate page, and add a top-level
Kconfig section to User and Developer Guides that links to the Kconfig
tips page and the preprocessor page.
Trying to avoid the Kconfig tips page becoming a dumping ground for
random Kconfig documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Using ':' as the separator in --modules breaks module specifications
like
nrfxlib:nrfxlib:C:/Users/Carles/src/ncs/nrfxlib
The ':' in 'C:' gets seen as a separator.
Use ',' instead, which is unlikely to appear in paths (at least in
--modules). Treat a doubled ',,' as a literal ','.
Another option would be ';', but it clashes with how CMake represents
lists, which is awkward.
Also make quoting of arguments with spaces more robust by passing
VERBATIM to add_custom_target().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The network sample automatic testing feature in PR #19677 is moved
to 2.2 so removing it from 2.1 release note.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of showing the prompt for symbols on the index page, show their
help texts. This makes searching easier.
Fall back on the prompt if no help text is available.
Also change the code to only show one of the prompts if several are
available (happens if a symbol is defined in multiple locations and adds
a prompt in more than one of them). It's probably overkill to show them
all, and it doesn't come up that often.
Suggested by David B. Kinder.
Co-authored-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use --modules to split the Kconfig reference up by where symbols are
defined. See the argparse docstring for --modules in
doc/scripts/genrest.py.
Not sure what the best way to split things up is, so feedback would be
appreciated. I just pulled out some top-level directories. It could
always be tweaked later.
If a symbol is defined in more than one module (by being defined in
multiple locations), it appears on multiple index pages.
To build the documentation, do
$ mkdir doc/b && cd doc/b
$ cmake -GNinja ..
$ ninja htmldocs
(output in html/reference/kconfig/index.html)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of having index.rst just link to other index pages in --modules
mode, list all symbols on it, and have links to the module index pages
at the top.
Get rid of index-all.rst and index-main.rst (and all related options).
index-all.rst is no longer needed, and index-main.rst (symbols outside
--modules) might not be that useful to people reading the documentation
(and could be added back if needed).
Also refactor and streamline the code a bunch. For the main index page,
the only difference between modules and non-modules mode is now whether
there's links to other index pages at the top.
Suggested by David B. Kinder.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 2.0.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Additions:
- Provide clear description of a typical board port on zephyr
- Add a clear statement that peripherals should be disabled by
default (unless clearly specified)
- Add clear mentions on peripheral that should actually be enabled
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a note about supporting new SoC Series in v2.1.0 release.
Style rework in the section for SoC support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adds a deeper hierarchy to the Bluetooth Mesh documentation by moving
the modules in separate pages with a brief description of the concepts
in each module.
Adds the full list of specification defined Health model faults.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
We've added some new capabilities for documentation writers such as the
tabbed interface and numbered instruction steps, as used in the updated
Getting Started Guide.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding a release notes section for the ARM Cortex-M
architecture, to be part of the Zephyr v2.1.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Noticed that <p> within a responsive table (as found in the kconfig docs
generated by the new genrest.py script in PR #20322) weren't displaying
using the same font size as table cells without <p> content. This
situation occurs when the help text in the Kconfig file is more than one
paragraph.
Also added a comment explaining why a previous CSS tweak was added.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In getting started, in case of macOS and Windows, the need to set
zephyr specific environment variables is only specified several links
away from the getting started, which can be easily missed for someone
who already has the toolchain installed. So just remind the user.
Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
All states in the thread state diagram were initial-cap except
"suspended". Make it Suspended for consistency.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The discard report is now generated for every run as
sanity-out/sanitycheck_discard.csv, the option --discard-report was
dropped.
Fixes#20804
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed some cut/paste from mynewt with references to os_callout,
os_event in example snippets.
code examples were also aligned to current settings handle API.
fixes#20743
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
A detailed overview of Zephyr's build system. This is a
thorough view of the low level build process starting from CMake and
using Make as the build system tool. Things missing here that will be
further documented:
- west
- external modules/libraries
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a simple block diagram detailing the SMP initialization flow. Not
pretty, but hopefully reasonable.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Documentation about scheduling options was burried in the Kconfig help.
It has better visibility as part of the scheduling section of the main
kernel reference pages.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
One shows how globals are routed for automatic memory
domains. The other illustrates control flow when making
system calls.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As presented to the TSC, Zephyr's out-of-box experience for new
developers is, well, complicated. A number of suggestions were
presented including simplifying the getting started material to present
a straight-forward path through the setup and installation steps through
to getting a sample application built, flashed, and running.
This PR is a work-in-progress towards addressing this OOB experience
with a minimal-distractions version of the GSG. Alternatives, warnings,
and material that could lead the developer astray were moved to
alternative/advanced instruction documents (based on the previous
separate Linux/macOS/Windows setup guides) and a new "Beyond the GSG"
document.
We do take advantage of a sphinx-tabs extension for synchronized tabs to
present OS-specific instructions: clicking on one tab will display all
same-named tabs throughout the doc.
We hope (and will continue evaluating) that this new GSG gets developers
set up quickly and then we can send them along to other documents to
continue learning about Zephyr and trying other sample apps.
Thanks for all your previous feedback that I've worked
into this new version.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to use clang it is necessary to set the variable
ZEPHYR_TOOLCHAIN_VARIANT to llvm instead of clang.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The mimxrt10{20,60,64}_evk board docs were renamed from <board>.rst to
index.rst in commit 0e4ff809d7 but were
missing entries in the html redirect list. Add them.
An entry for mimxrt1015_evk is not added because this board always had
an index.rst board doc.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Need to add the kernel_arch_interface.h header here
to match zephyr.doxyfile.in.
This is the header which contains the formal kernel-to-
architecture interface and we want docs generated for it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
