Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for driving the on-board LEDs present on the NXP TWR-KE18F
development board using FlexTimer (FTM) PWM modulation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use clock specified in the device tree for obtaining the source clock
frequency for the pwm_mcux_ftm driver instead of relying on having an
NXP Kinetis MCG clock available in all SoCs supporting FlexTimer (FTM)
modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit changes the Link-Layer Address Option length calculation
from hardcoded values to a numerical rounding up to full 8.
The length is calculated according to rfc4861 section 4.6.1.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Allow Security level HIGH and FIPS to be initiated when we have received
OOB data for the remote device. The security property of MITM is allowed
if out of band authentication data is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update bluetooth help text to include FIPS level in help text.
Also validate input range for the different connection types
Bluetooth security level for LE is from 1-4, while BR/EDR is 0-3
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Follow the approach of newlib to use a file sys/_types.h to specify the
underlying type for POSIX/libc types that must be provided in multiple
headers. The identifier for this type is in the reserved namespace.
Use this type rather than a specific standard type in all headers that
need to provide the type under its public name.
Remove the inclusion of <sys/types.h> from headers that should not bring
in all symbols present in that header, replacing it with the standard
boilerplate to expose the specific symbols that are required.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
time_t and suseconds_t are defined in time.h and sys/types.h. Handle
the duplication by adding ifdef protection around them similar to what
is being done for other types.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The number of MPU regions appears to be 16 instead of 8,
so we fix that in the board .dts files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For users that have an older version of west already installed, it is
useful to include `-U` in the getting started guide, otherwise the
instructions will fail to work depending on the state of the machine.
Fixes#18132
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'keys' is really a dictionary of options (like {"type": "int", ...}) for
a property. Calling it 'options' makes it clearer.
Also s/prop/prop_name/.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Perform OTP override when selecting 32Khz internal oscillator
to ensure 32KHz is enabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Use hex file for flash command, instead of elf file. This allows to
flash signed firmware, which is not available in elf format, by
specifying --hex-file command line argument.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far zephyr.elf file was hardcoded in cmake files. Remove it from
there and use cfg.elf_file from python, which can be overwritten by
specifying --elf-file command line option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add new tests that make sure that sendmsg() works when using
connected UDP socket and when not setting msghdr destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the UDP socket is connected, then allow the user to leave
out the remote address in msghdr struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We want to use the riscv64 toolchain across the board for RISC-V. That
requires a min of the 0.10.2 SDK, so bump the version before we make
that change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit includes tweaks in several tests, so
that the tests can be passing on ARM QEMU targets,
mps2_an385 and mps2_an521 with Qemu 4.x release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update SDK version to 0.10.2 to pick up new qemu and risc-v support.
Use Docker image 0.8.1 that includes an install of that SDK version.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dtlib is meant to be general and anything-goes re. property values, but
edtlib can be pickier. Check that all 'status' properties have one of
the values listed in the devicetree specification
(https://www.devicetree.org/specifications/), and error out otherwise.
This will get rid of the 'status = "ok"'s (should be "okay") that keep
cropping up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit a84ded74ea ("dts: Replace status = "ok" with
status = "okay""), for newly introduced stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Route these to the equivalent pins for RXD1 and TXD1 on the Arduino
Mega.
Note that uart0 is routed to the debug probe IC on the nRF9160
DK, and uart1 is routed to where the RXD0 and TXD0 Arduino pins are on
the DK. This makes RXD1/TXD1 a logical place to put these UART pins,
since the header layout for the DK board matches the Arduino mega.
This is also necessary to keep some downstream code compiling which
needs to enable the UART2 but doesn't have a good place to put these
pins, since the new DTS parser is enforcing that all required
properties (like tx-pin and rx-pin in this case) are set for nodes
with status = "okay".
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This adds a basic app which puts some rectangles on the display
It's hard to write an equivalent README to the rest of the sample
documentation, as the LCD I have uses a custom board thrown together for
testing. (ie other LCDs have publicly available modules)
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
This adds a driver for st7789v lcd controller, and TL019FQV01 lcd.
The bulk of the driver is based on the existing ili9340 driver.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
NRF_UICR needs to be defined for nRF9160 SoC in
nrfx_config_nrf9160.h, because it is not defined
in nrfx/hal/mdk/nrf9160.h (as it is a Secure-only
peripheral).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Authentication using OOB data uses the on-air device addresses used
during connection setup. So we need to check against the on-air
addresses in the info object to see if we have correct OOB data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue with registering authentication callback handlers failing
without notifying the user of the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the src and dst naming to refer to the identity addresses of the
connection. Keep the device addresses used during connections but rename
them to local and remote instead.
Update documentation to be more descriptive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added tests of flash driver compatibility with fcb-backend.
For flash drivers which support write-block-size bigger than 1 B
test of unaligned data access uses native write-block-size
as it is dedicated to check whether settings works well on platform
which has 1 B access which is native on the current DUT.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
