Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add information about DNS resolver and mDNS/LLMNR responders
which are converted to use the socket services API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a note on the revamp of the multilevel interrupt
architecture, the changes to be made, and new macros to help
with the update.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Modify the SMF such that state transitions from parent states choose the
correct Least Common Ancestor based on the transition source rather than
the current state.
SMF set as experimental.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Remove `bt_l2cap_le_endpoint.init_credits` that has zero uses and is
just taking up RAM for no reason.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Mention the changes to Bluetooth HCI Kconfig options and one
semi-private API (bt_read_static_addr).
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), make fs_mgmt use either PSA (when available) or MbedTLS
(as a fallback) for SHA-256.
The use of PSA is guarded by CONFIG_MBEDTLS_PSA_CRYPTO_CLIENT
which requires a locally-built PSA core for devices without TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Indicate macro and enum changes with respect to new inclusive
term in eSPI specification 1.5.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The fuzzing support only worked when targetting the
native_posix board, and in a way which was very coupled
with the fuzzing sample.
This has now been refactored, so those who may have
relied on hooking to the board in the same way as this
sample will need to adapt.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the Kconfig symbol for all ITE SoC variants.
Rename the SOC_SERITES_ITE_IT8XXX2 to SOC_SERIES_IT8XXX2.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
As of now only the resume action is supported, and doesn't perform
any power action on the GNSS modem.
It allows to initialize the GNSS driver later than it would otherwise
be.
Also, the driver now runs a modem-specific chat script on resumption.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Deprecate the advertiser options `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD`.
Reasons:
- It is out of place in the advertiser options, as it acts on
advertising data and not configuration
- The behavior is not clear. All of these are trick questions:
- where does the data for the name go?
- do I have to allocate memory for this?
- does it work the same in legacy vs extended advertising?
- The trade-off between UX improvement and extra complexity in the host
is debatable. Hundreds of lines in the stack to avoid making the user
type out less than ten.
Also deprecate the following macros that uses those options:
- `BT_LE_ADV_CONN_NAME`
- `BT_LE_ADV_CONN_NAME_AD`
- `BT_LE_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CONN_NAME`
- `BT_LE_EXT_ADV_SCAN_NAME`
- `BT_LE_EXT_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CODED_NCONN_NAME`
Update the migration guide and the release note for Zephyr 3.7 to
describe those changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The SparkFun Pro Micro header pins are numbered D1, D0, GND, ... from top
left whereas the SparkFun Pro Micro RP2040 and the Adafruit KB2040 boards
are using gpio 0, 1, GND, ... , so the pro_micro: connector gpio-map of
these boards should reflect that.
Graphical Datasheet for SparkFun Pro Micro RP2040:
https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
Graphical Datasheet for SparkFun Pro Micro:
https://cdn.sparkfun.com/assets/f/d/8/0/d/ProMicro16MHzv2.pdf
Pinout of the Adafruit KB2040:
https://learn.adafruit.com/assets/106984
Please note that the KB2040 uses CircuitPython pin labels D0, D1 which does
not seemt correspond to the Arduino labels D0 and D1 used by the Pro Micro.
Signed-off-by: Daniel Irekvist <ulmanyar@gmail.com>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Virtual LAN is changed to use the virtual network interfaces.
Add information what changes might be needed because of this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add enum for `constant-charge-voltage-max-microvolt` property to
signalize improper values given with device tree at compile time.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Maximum charging current is selected with an external resistor in
the MAX20335 charger. Therefore it is not possible to configure it
with software directly. There is only a capability to limit current
set with hardware but configuration of the limiter is not
straight-forward.
To reflect real functionality, drop usage of
`constant-charge-current-max-microamp` property as an required one and
use custom `chgin-to-sys-current-limit-microamp` instead.
Use enum in binding file to signalize improper values at compile time.
Drop support for `CHARGER_PROP_CONSTANT_CHARGE_CURRENT_UA` API property
since this cannot be handled.
The `max20335_get_constant_charge_current()` function become useless so
remove it.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Rework the data scaling algorithm for the "deadzone" mode so that the
deadzone is subtracted from the input rather than from the output. This
makes the whole output range usable rather than making the output jump
from the center value to the minimum deadzone range.
This changes the calibration data structure as well so now all values
refer to the input data, which is more coherent.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
A Kconfig item is added and the buffer
is embedded into the modem_cmux struct.
The default value is increased from 16 to 64 bytes in
an effort to reduce the number of modem_pipe_receive() calls.
CONFIG_MODEM_CHAT_LOG_BUFFER is renamed
to CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE for consistency.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The virtual interface API "input" callback is removed and
its functionality is implemented in "recv" callback.
This change affected the IP tunneling implementation in the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Due to the source/header files are moved to subfolder "classic",
rename the kconfig option BT_BREDR to BT_CLASSIC to make the
folder name and kconfig option name consistent.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The IPv4 netmask handling is changed and it might need
adjustments from user if using more than one IPv4 address
inside one specific network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
ws2812-gpio's `in-gpios` property is not used as an input pin.
Renaming it to `gpios` to reflect the actual situation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
