Add a nocopy feature for sending message through the icmsg IPC library.
Also eliminate data races if multiple threads are using the
same ipc instance and are trying to send a message simultaneously.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
This patch adds an optional nocopy feature for RX message to the icmsg
IPC library. The nocopy feature can be enabled using project
configuration.
If this feature is not used by icmsg users it is recommended to disable it
to reduce memory usage and improve run-time performance.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
On system startup icmsg headers space must be cleared before
cores start handshake procedure. The simplest way to enforce
it is to clear memory by the core responsible by enabling
the remote core, before the remote core is enabled and before
the handshake is started.
This patch ensures that nRF53 APP core clears both TX and RX
memory for icmsg before it starts NET core.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This commit enables the initiator or the follower
role for the ICMSG multi-endpoint backend
depending on dts by default.
It is needed when BT_RPMSG transport for HCI is used.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Cleaning up the instances of CODE_LOCATION used in the soc
clock_init and replaced them with the Kconfig
FLASH_MCUX_FLEXSPI_XIP due to the correlation with
the flexspi clocks and the XIP feature of Flexspi.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
This Kconfig is moved to the soc level since it determines
the flexspi clock initialization for XIP.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Currently the test only pushes 1 byte in each call to uart_fifo_fill().
This doesn't test cases where the driver can accept more than 1 byte
in the fifo.
Instead, try to push all the bytes in the uart_fifo_fill() call.
Internally the driver may only accept 1 byte, in which case the test
will be equivalent as before the patch.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Fix handling of gpio-reserved-ranges within MCUX iGPIO driver, to ensure
that the configuration IDX will be correctly calculated for pins where
multiple reserved ranges are present on the GPIO controller
Fixes#52506
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Instead of calling zperf shell initialization routine on the first
command execution, initialize it during system boot, along with other
zperf submodules.
Remove redundant IP address configuration on an interface. The default
configuration relies on NET_CONFIG module, so there's no need to set the
address manually in zperf.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Zperf shell functionality is now encapsuled within a single file,
therefore it no longer makes sense to have a separate shell_utils
file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make the TCP/UDP server functionality restartable. Provide a public API
to stop the TCP/UDP server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add public API for zperf download functionality. The TCP/UDP server
modules are decoupled from shell, allowing to trigger download directly
from the application code. The shell submodule makes use of this new
public API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add shell option to the UDP/TCP upload command, which allows to execute
the upload asynchronously. This allows to unblock the shell for other
commands during the upload.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit defines a public API for zperf upload functionality. The
UDP/TCP uploader modules are decoupled from shell, allowing to perform
uploads directly from the application code. The shell submodule makes
use of this new public API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixup ADC sample support for boards with LPADC present. This ADC only
supports an external reference voltage, which is a board-specific value.
Add reference voltage values for all supported boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds a note on MCUmgr Bluetooth and UDP transports now being
automatically registered without needing an application to
manually register them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This moves the UDP and Bluetooth initialisation for MCUmgr to be
performed automatically with the new hander registration feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Makes group registration functions for MCUmgr handlers static as
they are registered automatically at startup.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a note on MCUmgr handlers now being automatically called
without needing an application to manually register them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Added information about pin output direction into
Z_PINCTRL_STM32_PINCFG_INIT if output_low or output_high is provided.
GPIO output flag is set in configuration struct and this will end up
being loaded into MODE register. Because of that it is no longer
required for pinctrl_configure_pins() to set MODE register value for
GPIO input/output.
Fixes#53141.
Signed-off-by: Lukasz Mazur <lukasz.mazur@hidglobal.com>
Add the ISO packing field when creating a unicast group.
This refactors the structure of the unicast group create,
as it now takes both the packing as a group parameter, as well
as an array of stream-specific parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update UF2 family ID for the entire STM32F4 series, except STM32F407xx
which have their own dedicated IDs.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Different CMake versions can have very subtle differences, for
instance CMake 3.21 links object files in a different order compared
to CMake 3.20; this produces different binaries.
CMAKE_VERSION is required information to track binary differences
between two build systems.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The previous PR had been merged mistakenly, and it contained a reference
to a PR. Point to a SHA instead now that
https://github.com/zephyrproject-rtos/hal_nxp/pull/213 has been merged.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
imgtool could be used for many things, but
CONFIG_MCUBOOT_EXTRA_IMGTOOL_ARGS, despite it's generic name, is only
applied when signing. Make it even more clear in the prompt and help
text that it's limited to signing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add uart_configure and uart_config_get functionality to
MCUX flexcomm driver to be able to dynamically configure
flexcomm uart at runtime.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add support for SparkFun RED-V Things Plus board that is
a development board with a SiFive FE310-G002 RISC-V SoC.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add cpu-power-states property in cpu0 node to describe the
two supported power states idle and suspend_to_ram
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
The MKFS function declaration is conditionally compiled
based on the MKFS kconfig, which prevents it from being documented.
Remove the conditional.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add configurations flashing and debugging for openocd.
The change makes `west debug` and `west flash` use the setting defaultly.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
When there is an ACL disconnect, or the unicast group is otherwise
deleted, the endpoints were not properly handled, causing
incorrect `dir` values and ASSERTs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When adding or removing a stream from the group, the
endpoint may or may not have been allocated depending
on the state of the endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The hci_le_setup_iso_data_path function required that if
the path->cc was set, the length could not be 0.
There is no reason why it should not be allowed to be 0
in that case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast client could not create a CIG with a unidirectional
CIS, because it would not set the correct values as per the
HCI spec for the unused CIS direction.
Instead of implementating a work around, this commit modifies
it so that for unidirectional CIS, we copy the QoS values
to the unused direction, so that we always set valid values,
but it also allows us to actually use that CIS direction later,
assuming that the QoS settings does not change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For the unicast client, the direction for the endpoint
is reversed in terms of RX/TX, i.e. a sink endpoint is
RX for the unicast server and broadcast sink, but TX
for the unicast client, and similar for the source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The MKFS portion of the test is still was being included
in the build when it shouldn't because of a file glob
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
As written, the title and description of the Kconfig option seem to
specify the logging sub-system will not flush until the buffer is full.
Someone reading this would expect that shorter log message will not be
flushed until the specified number of bytes accumulate.
This is not the case. Each log message is flushed when finished. The
size is only the maximum bytes of a single formatted message's contents
that will be accumated before the backend flushes.
What's more, it only applies in deferred mode. In immediate mode there
is no buffering, not just of multiple log messages but also of the
message contents as they are formatted.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The Swan was originally cloned from the Nucleo-L4R5ZI.
The Nucleo is a sister board, but not identical
and some artifacts of cloning are incorrect.
Signed-off-by: Zachary J. Fields <zachary_fields@yahoo.com>
There were some requests from users for adding the possibility
of setting default openthread tx output power using kConfig.
It is possible by adding the CONFIG_OPENTHREAD_DEFAULT_TX_POWER
kConfig and assigning it to the tx_power variable in the radio.c
file in the Openthread module.
Added the possibility to set default openthread power using
kConfig.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
