Fix use of handle field in HCI command handling for some ISO-related
commands. The response buffer may reuse the command buffer. Therefore,
the handle field must not be copied directly from the command to the
response.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Set bits for ISO-related supported commands depending on selected
features and adjust compilation guards for the respective handler
functions.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix incorrect calculation of received common extended header
length. Due to this a zero length advertising data is
reported in Extended Advertising and Periodic Advertising
report as one byte AD data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising PDUs are now dispatched immediately one by one
(i.e. without list of PDUs as when flushed from aux context) so we
do not need to iterate such a list.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA, TargetA, ADI and SyncInfo are RFU in periodic advertising PDUs so
we should ignore them when present in PDU.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
There were missing commands in local supported commands list that
are related with connectionless direction finding.
The commands are implemented but they haven't been added
to HCI_Read_Local_Supported_Commands list.
The commit fixes that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add check to validate PHY value in the Auxiliary Pointer
structure in the common extended header format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add functions that handle enable CTE request control procedure
request from host.
Implementation of ll_df_set_conn_cte_req_enable in ULL is partial.
It will be integrated with refactored implementation of control
procedures.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix scan_data_status value from being incorrected OR-ed with
the advertising data status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to traverse the Extended Active Scanned
advertising PDUs, generate the Scannable Advertising and
Scan Response Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Active Scanning hold back the received PDUs in
a linked list and send it to HCI together so that fields
present across these PDUs can be aggregated for generating
the LE Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Flush the scanned advertising PDUs to HCI while receiving
the scan response PDU when Extended Active scanning.
This reverts earlier implementation to remember the
advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Extended Active Scanning and generation of
Extended Advertising Report with Scan Response event type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When generating LE Extended Advertising Report the device
address can be either in primary or auxiliary channel PDU,
do not overwrite resolving list index if present in primary
channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core spec 5.2 requires to provide CTE type in
periodic advertising report.
The implementation of le_per_adv_sync_report assigned
value zero to be default CTE type. The assigned value
in Bluetooth Core spec 5.2 means "AoA Constant Tone
Extension". In case there is no CTE attached to periodic
advertising PDU, CTE type should contain value 0xFF.
This commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add the check for mixed use of Legacy vs Extended HCI
commands for Periodic Advertising related HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising report to set the directed bit in
the event type when receiving directed non-connectable
advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks for invalid PHYs supplied to HCI LE Extended Scan
Parameters and LE Extended Create Connection commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use macros to access SCA and Channel Map fields in the Sync
Info structure in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds support to allow advertising PDUs to be linked which is
required to send advertising trains, i.e. AUX_CHAIN_IND.
PDUs are linked with a simple single-linked list, the pointer to next
PDU is stored at the very end of PDU buffer. This prevents it from
being overwritten if PDU is modified and allows for build time offset
calculation.
There are few helpers added to make handling easier, e.g.:
- get next linked PDU
- get last linked PDU
- link one PDU to another
- link PDU at the end
- release all linked PDUs (except for 1st)
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix wrong channel index send by controller in connectionless
IQ samples report. Former implementation reported value from
lll->data_chan_id which is not valid channel index.
Updated implementation reports value stored in IQ samples receive
node during periodic scanning event preparation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix bug of missing sync_handle parameter in return data in
HCI_LE_Set_Connectionless_IQ_Sampling_Enable commnad
handling function.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Coverity detected that a zero divisor can be passed to
ll_create_connection() without parameter sanitization. Conditionally
check the connection creation parameters according to spec.
Fixes#35343.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the missing HCI event data len limit check when encoding
incomplete advertising data report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Max data length has to be adjusted for subevent code, otherwise we'll
hit an assert when trying to add data to event due to insufficient
free space.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Replace the use of LL_FEAT define with ll_feat_get() so that
feature set value can be updated at runtime with host
feature bit values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change use of dedicated memory pool for linked list nodes for
node_rx_iq_report to common mem_link_rx. Former solution had
a drawback. Released link nodes may be enqueued to wrong memory
pool. E.g. link related with nopde_rx_iq_report went to common
link memory pool, whereas link nodes from common pool were enqueued
to dedicated list.
The solution was working because links have the same memory layout,
just different memory pools they originated from.
The problem may occur if one of those link memory pools is reset.
Then the same link may be used by node_rx and node_rx_iq_report
at the same time, causing controller failure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Disable of CTE sampling for periodic advertising sync PDUs may be
interrupted by radio event. In such situation, TX thread will be
handled before RX thread delivers IQ samples report to host. In
this case RX thread would deliver IQ samples report after CTE
sampling was disabled.
To avoid such situation RX thread has to check if:
- CTE sampling is not disabled,
- CTE sampling was not requested to be disabled after start of radio
event.
CTE sampling configuration is double buffered. Updated configuration is
swapped at the beginning of radio event.
If CTE sampling is diabled or requested to disable (next radio event
didn't start), the IQ samples report should be dropped by RX thread
and should not be delivered to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable or disable CTE sampling in periodic advertising scanner LLL
implementation lll_sync is extended by lll_df_sync member.
The lll_df_sync is a double buffer for lll_df_sync_cfg.
It will be used by LL thread to enable or disable CTE sampling and
provide configuration for sampling CTE in AoA mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add handling of Direction Finding node_rx_iq_report type in ULL.
This is required to correctly deliver IQ samples collected by
LLL during receive of PDU including CTE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
