Update `shell_backend_uart` to take into account the new line print by
`z_cursor_next_line_move`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Instead of using filter (which is expensive in terms of CI as
it needs to run cmake on everything to get the full kconfigs
before filtering can be done), change that to a curated list
of allowed platforms. This avoids the expensive filtering
operation, yet can still run on some emulated platforms to
verify the dictionary output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Before commit baa70d8d36 ("arch/arm64/mmu: fix page table reference
counting part 2") it was possible to perform a partial unmap of a block
mapping. Restore that ability and provide a test case to validate it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Since testing.c/h was moved to mesh, all functions and
structs in those files now follow a bt_mesh_test_*
naming scheme to be consistent with the naming in Zephyr.
Due to missing includes in many files, this commit also
added some that were missing in order to build since
the order of includes have changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The file is only ever used by mesh and it is even stated in the
header of the file that it is internal APIs.
The include file has been merged with the host testing.h file
as that was mesh specific as well. Similarly the testing.c
file was also moved
This is part of a process to clean up the file structure of
Bluetooth as it's a bit messy, which is evident from the
MAINTAINERS.yml file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit excludes the `m2gl025_miv` platform from running the
`kernel.common.stack_sentinel` test. It experiences the same issue as
`hifive1`, which was described in issue #66070.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Exclude RW612 based boards from the WiFi testsuite, as these boards
require binary blobs be downloaded in order to build as expected
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds unittests for the CAP Initiator start procedure, simply
verifying that the procedure works as well as
testing invalid parameters.
This also allows us to remove the invalid behavior checks
from the babblesim test implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This provides memory mappings with the ability to be initialized in their
paged-out state and be paged in on demand. This is especially nice for
anonymous memory mappings as they no longer have to allocate all memory
at mem_map time. This also allows for file mappings to be implemented by
simply providing backing store location tokens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The latency_measure benchmark is designed for systems with a single
CPU. When the system allows for multiple CPUs, instead of forcing
a single CPU to be used via 'prj.conf', spawn a non-preemptible
thread to keep the other CPUs busy.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Having `CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` to select the
`CONFIG_SYMTAB` or to explicitly not print the symbol name
during exception stack unwind seems unnecessary, as the extra
code to print the symbol name is negligible when compared with
the symbol table, so just remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently it supports `esf` based unwinding only.
Then, update the exception stack unwinding to use
`arch_stack_walk()`, and update the Kconfigs & testcase
accordingly.
Also, `EXCEPTION_STACK_TRACE_MAX_FRAMES` is unused and
made redundant after this change, so remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently it supports `esf` based unwinding only.
Then, update the exception stack unwinding to use
`arch_stack_walk()`, and update the Kconfigs & testcase
accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Very very weird behavior.
Deleting the `options & BT_LE_ADV_OPT_USE_NRPA` branch in
`id.c:bt_id_set_adv_own_addr` makes the test pass. But add a log in that
branch, and you'll see that we never take it in the UT binary..
I don't have time for this, maybe some compiler guru or C language
lawyer can look at that decompiled function and figure out the root
cause.
Someone should also really fix the Bluetooth unit tests and make them
run on any Bluetooth related PR. Also nightly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Move negative tests for flash driver to a separate test suite.
Run negative tests only on platforms that are aligned.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add a simple test to showcase how RNG can be configured on different
platforms in order to allow Mbed TLS's PSA crypto implementation to
work properly.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Currently, the test doesn't clear the control data buffer before
calling recvmsg. This leads to recvmsg being unable to add the new
control data, which corresponds to the current received data.
This commit aims to clear the control data buffer to match most use
cases, when the control data buffer is empty before calling recvmsg.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Introduces the test for testing the new functionality
of ztest shell.
Passing -r (repeat iter) parameter. This allows to run
a particula testcase or testsuite several times.
Passing -p (any value) parameter. This allows to provide
a parameter to a test at runtime.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
When running on native_posix, the thread needs to be created
before the thread name can be set.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add test suite for remove of zephyr native libc
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
This commit moves the test buffer from ITCM (not accessible by DMA) to DTCM
on several NXP boards, to make the test successful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit places the chan_blen_transfer DMA test's TX and RX buffers
in a separate file that gets entirely relocated. This ensures that the
buffers reside in the correct memory, without breaking other things
due to relocation of test data/code.
Fixes#75676.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Fix compilation by providing an overlay file for cpuapp.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Fix compilation by defining the watchdog flags for nRF9280 as well.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Currently this code related to how to configure the
flash size and address when using flexspi to XIP is copy
pasted in all sort of places and ways all over the tree,
let's clean this up and have single point of control over
this configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Implemented the following:
- `asctime_r()`
- `asctime()`
- `localtime()`
- `localtime_r()`
- `ctime()`
- `ctime_r()`
Specifically:
- the implementation of `localtime()` & `localtime_r()` simply
wraps around the gmtime() & gmtime_r() functions, the
results are always expressed as UTC.
- `ctime()` is equivalent to `asctime(localtime(clock))`, it
inherits the limitation of `localtime()` as well, which only
supports UTC results currently.
Added tests for these newly implemented functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
There was hardcoded value for user_data which is no longer valid.
Use proper CONFIG_BT_CONN_TX_USER_DATA_SIZE for that.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fix warnings generated when performing sensor drivers build test
due to typos in i2c DT definition.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
