Such state needs to be set _from_ the PM API functions and not the other
way round. So if a network device driver does not support such API, it
will not be able to set the core net_if on PM state, obviously.
Currently, these functions only set/unset NET_IF_SUSPENDED flag.
More logic will be added later, to decide whether the net_if can be
actually set to suspend mode or not and also to take care of all timers
related to the interface.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function can be used for example by network power management
to check if the network interface can be suspended or not.
If there are network packets in transmit queue, then the network
interface cannot be suspended yet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit 971ae59913 ("net: pkt: Make sure iface is not null when
accessing L2") fixed net_if_l2 where iface was NULL, however if
iface->if_dev is NULL, the check breaks and returns an offset of
NULL (0x82 or so). This is incorrect.
Let's add a check for iface->if_dev as well.
Signed-off-by: Michael Scott <mike@foundries.io>
It is possible that the network interface is not set when we
check the interface in net_pkt.c:pkt_buffer_length(). For example
in icmpv6 unit test the interface is left as NULL as the test does
not care about what network interface is used. For real hw like
mimxrt1050_evk, which supports Ethernet, we need to add additional
checks for the interface being non-null.
Fixes#20088
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A socket-offloaded interface should bypass interface initialization in
the same way as net-offloaded interface does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing an IPv4 router was missing, as well as finding the default
router for an IPv4 address.
Note howevere that IPv4 router features are not used anywhere yet. But
at least the API is there and is a 1:1 to IPv6, if that matters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- router lifetime is always a u16_t so fixing
net_if_ipv6_router_update_lifetime() signature.
- Coalescing router timers into one: this reduces the net_if_router
structure by 22 bytes
- refactor IPv6 and IPv4 router code so it's handled in generic
functions, to avoid duplicating 90% of the code for each family. This
also fixes the lifetime support for IPv4 which was missing.
Note however that IPv4 routing support seems to be missing as none of
the relevant functions are used anywhere yet.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_ipv6 by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_ipv6 can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 network interface
It starts to be interesting if it has 2+ network interfaces then.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_addr by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_addr can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 unicast IPv6
address. It's a nice memory improvment once it has 2+ unicast IPv6
address. Note that having IPv4 enabled along with IPv6 will also see
memory improvements since both IPv6 and IPv4 use the same struct
net_if_addr.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DAD use dad_count attribute in struct net_if_addr, since DAD is ran on
each and every ipv6 unicast address.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The extra check for CONFIG_NET_OFFLOAD is not needed as it
prevents documentation generation for this API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that IPv4 specific functions are callable even if
IPv4 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv6 specific functions are callable even if
IPv6 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function just stores the buffer pointer passed, so explicitly
mention that the buffer must remain valid while netif itself is
valid. For example, it can't be stored on stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even if we do not have wifi network offloading enabled, allow the
application to be compiled just fine. This allows easier
testing of the application even if the board does not support
wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
