The auto-connect by name did not verify that the found device
was connectable before attempting to connect.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a device disconnects we previously just unref'ed it and
set default_conn = NULL. However, if we are connected to mulitple
devices, it makes sense to set the default_conn to one of the
other connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Ensure that scan_filter.addr is NULL terminated by only copying
the sizeof the buffer -1 and then always setting the last byte to
\0.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When copying the address in cmd_scan_filter_set_addr we now
use strncpy to not copy more bytes than what fits. This
should already have been fixed with a check earlier in the
function, but coverity still complains.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The minimal value of BT_CODEC_MAX_DATA_LEN is 1, so it
is always > 0.
Includes to audio.h in shell bt.c was removed as audio.h
should only be included if BT_AUDIO=y.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add verbose output of scan data to output all received data types as
hex values. This is turned off by default and can be toggled using
the bt scan-verbose-output <on|off> command.
Signed-off-by: Martin Rieva <mrrv@demant.com>
Some systems can support only legacy OOB pairing while others only
LE SC OOB pairing.
The existent API function "bt_set_oob_data_flag" was removed.
Two new API functions were added:
* "bt_le_oob_set_legacy_flag" to signal that legacy OOB pairing is used
* "bt_le_oob_set_sc_flag" to signal that LE SC OOB pairing is used
The code will now advertise the presence of OOB flag depending
on the type of pairing method(SC vs legacy)
Signed-off-by: Sebastian Panceac <sebastian.panceac@ext.grandcentrix.net>
Move all audio related shell implementations to the
audio directory, to use the same structure as Mesh.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When doing "bt connections" the currently selected ACL (default_conn)
is now indicated with a "*" making it easier to determine which
of the connections is currently selected.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update help message of some commands of the Bluetooth Shell that were
inconsistent.
Also add the `dir-rpa` parameter to the advertiser parameters to fully
support directed advertisment parameters.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
`ad_len` was never initiatialized before we started
incremetenting and using it.
We would also override any user data in ad_init, which
is fixed by using the length of the user data as an
offset into the array.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Similar to the ad_init that automatically adds advertising data
from other modules, pa_ad_init has been added to do the same
for periodic advertising.
The only use case so far is the BAP broadcast source
data, if enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add command to perform the Periodic Advertising Set
Info Transfer procedure, which transfers information
about a periodic advertising set to a connected device.
In essence this is just PAST but from the advertiser
instead of a 3rd device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moved the name filter last, as that it the most expensive
to use.
The address filter has almost been moved after the more
trivial checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add filtering for the pa_interval. This can be used to
easier find devices that are advertising with periodic
advertising.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the service instance struct instead of the more generic
`bt_csip` for the CSIP set member API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed remaining structs and functions that are not
for the set coordinator to use the set member CSIP
role name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed the coordinated set implementation to use the
profile (CSIP) name instead of the service (CSIS) name, as
the former is more general.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the local advertising address to bt_le_ext_adv_get_info.
This may help with debugging, but is also needed to
properly support something like the BAP Broadcast Assistant.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add back erroneously removed ll-addr command, when removing
legacy Controller, which is provided when using Zephyr
Bluetooth Low Energy Controller to read the random and
public address set by the Host, and used by the Controller.
Relates to commit b67a31e411 ("Bluetooth: controller:
Remove legacy LL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This changes the API to use proper naming convention, as the code has
been moved out of capabilities.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The function did not provide anything that could
not just as easily have been done in the existing
loops.
This just required moving the call to ad_init to
after the param parsing loop.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new command, connect-name, which takes a string
as the single input and uses that to setup a scan filter
and connect to the first device that matches the name.
This command is thus basically shorthand for
bt scan-filter-set <name>
bt scan on
bt scan off
bt connect
bt scan-filter-clear-name
The idea of this command is to not only make it easier
find and connect to devices in a crowded environment,
but also to more easily connect to devices that changes
their advertised address.
The implementation is minimal as it uses existing
shell commands.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The `name` parameter is redundant, as the `name` and `name-ad` options are
available already as `adv-create` and `adv-param` command parameters.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Shell command "bt init sync" now correctly enables Bluetooth
synchronously, and "bt init" enables Bluetooth asynchronously.
Fixes#47860.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
When invoked without parameters, `bt connect` will now attempt to connect
to the last scanned device. Used in conjunction with the RSSI filter, this
makes the connection process somewhat scriptable.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This adds an RSSI cutoff, so any scanned devices that are below the given
value (in dB) will not get printed out. Very useful in noisy environments.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Extend the command "bt appearance" to take an optional argument, which
is used to set the appearance.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
