All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the references to the breathe extension in the
Schematic of the documentation build process graph and
the filtering expected warnings section.
Signed-off-by: Simon Hein <Shein@baumer.com>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
set high_bandwidth and use the cfg->mps to set
ep_init.maxPacketSize because NXP MCUX controller
driver supports additional transaction bits in
maxPacketSize.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Instead, use the helper to get the size field from the MPS value.
MPS value may contain information about additional transaction
per microframe (bits 12..11).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Make driver aware of High-Bandwidth endpoints both in Completer and
Buffer DMA mode. In Completer mode TxFIFO must be able to hold all
packets for microframe, while in Buffer DMA mode space enough for two
packets is sufficient.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
DMA is capable of packetizing transfers on its own and the driver
doesn't need to check available TxFIFO size when scheduling DMA
transfer.
Split packets on DWORD boundary when writing more than one packet to
TxFIFO in completer mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add macros for converting between Max Packet Size and total payload
length. Allow drivers specify whether endpoint supports high-bandwidth
interrupt and high-bandwidth isochronous transfers.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use COND_CODE_1() instead of UTIL_AND() to make it possible to only
define the HID_MPS_LESS_65_ macros up to value 64.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
wMaxPacketSize in endpoint descriptor is stored in little-endian order,
but the mps parameter passed to functions is in host order.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This adds a kconfig option to force
tx blocking on serial. This way only rx
will use the interrupt.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
To prepare for supporting flexcan, can node should be
renamed to canxl to support both flexcan and canxl
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
The received messages are put into the FIFO one by one in the
order, the hardware will return the queue index for current
message. So use the index instead of reading always from 0.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
CONFIG_BT_CONN_TX_USER_DATA_SIZE is now used for callbacks in the host.
We don't want to limit ourselves to that, so change the wording to be
more generic.
In the future, the plan is to not use user_data at all, removing the
need for the kconfig altogether.
Also rename the structure that was referenced in the docstring.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
/zephyr/soc/intel/intel_adsp/ace/power.c:46:9: warning: implicit
declaration of function 'cache_data_flush_range'; did you mean
'sys_cache_data_flush_range'? [-Wimplicit-function-declaration]
46 | cache_data_flush_range((__sparse_force void *)
| ^~~~~~~~~~~~~~~~~~~~~~
| sys_cache_data_flush_range
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The symbol DCACHE_LINE_SIZE was not being defined in Intel ADSP
targets.
It fixes the following problem:
/zephyr/soc/intel/intel_adsp/ace/power.c:30:29: error:
'CONFIG_DCACHE_LINE_SIZE' undeclared here (not in a function); did you
mean 'XCHAL_DCACHE_LINESIZE'? 30 | uint8_t
adsp_pending_buffer[CONFIG_DCACHE_LINE_SIZE]
__aligned(CONFIG_DCACHE_LINE_SIZE);
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In SoC imxrt1010, edma channel has separate interrupt entry,
not like the rest of in-tree imxrt SoC series
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Power off the SD card in `DISK_IOCTL_CTRL_DEINIT`, instead of only
waiting for the card to be idle then doing nothing. This is a safer
state for `DISK_IOCTL_CTRL_DEINIT`, which is documented as preparing the
disk to be removed from the system. It also has the advantage of
lowering power consumption while de-initialized.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit ensures that the state of the address can be changed from
the Deprecated state to the Preferred state.
Additionally, an issue with improper memory comparison size for the mesh
local prefix has been fixed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
The .bin & .hex build output is optional and can be disabled by
CONFIG_BUILD_OUTPUT_BIN/HEX.
Add support for the mandatory .elf build output
to the jlink runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added the battery level status char to bas service
as per bas_1.1 spec. Added BSIM test for BAS service
to test the NTF/INDs of BAS characteristics.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
dhcv4 server was not providing the dns server details to the
client because dns option was handled. Added the dns server
option to be send to the client as response form dhcpv4 server
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
Unfortunatelly new Qualification Workspace is not able to properly import
ICS if file is UNIX line endings.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To make the scanner module more understandable and more streamlined, I
reworked the update mechanism of the scanner. The scanner tracks now the
parameters that were used to enable it and the reason why it is running.
This facilitates state logic and allows other modules to "start the
scanner", altough it is already running.
This is mostly a refactoring and not a functional change.
Added a test to verify the behavior.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
add to task
A common question is how twister decides on which platform to run
a given test. Added section is meant to explain those rules.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The serial number for debugger selection over USB
can be selected with the dev-id. This change
reflects also more the workflow of west flash
with J-Link.
The usage of SelectEmuBySN breaks the support for
J-Link over IP with twister.
Signed-off-by: Michael Arnold <marnold@baumer.com>
sys_heap_validate() is in sys_heap.h API but it is available only when
CONFIG_SYS_HEAP_VALIDATE=y. Add empty implementation if option is
disabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Enables open loop operation when initializing into LRA mode. Open loop
operation is enabled by default for ERM mode. This is hard coded for LRA
mode because calibration is currently unsupported.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds "vib-overdrive-mv" device tree property to configure the overdrive
clamp at initialization.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds support for boot time configuration of the rated voltage at
initialization via "vib-rated-mv" devicetree property.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds the default value for the existing properties to the device tree
and fall back on those values at initialization if necessary.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Removes an unused enum defining the DRV2605 power states. This enum is
dead code so it is being removed.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
