The bindings.rst page has gotten too big. Split it up into
sub-documents to improve readability and restore maintainability.
As part of this effort, move the /zephyr,user node documentation into
its own page in the guide. This page has proven extremely difficult
for users to spot in my experience, and it's meant as a convenience,
so let's make the documentation more convenient as well.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Use the macro as defined by the
include/zephyr/dt-bindings/dma/stm32_dma.h to configure the
dma channel.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Use the macro as defined by the
include/zephyr/dt-bindings/dma/stm32_dma.h to configure the
dma channel.
Use the STM32_DMA_PERIPH_TX or STM32_DMA_PERIPH_RX value.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Defines DMA macro to help channel configuration and feature for the stm32
devices. Add one default value for most of the usecases
of peripheral DMA settings.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add check preventing Out of band access. There are tests trying to
access out of band handle like:
test_sink_invalid_ref and test_source_invalid_ref trying to access
handle 99.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds the BT_AUDIO_METADATA_TYPE_AUDIO_STATE and
BT_AUDIO_METADATA_TYPE_BROADCAST_IMMEDIATE metadata types from
the LE Audio assigned numbers document.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The updatehub shell cmd_info allocate memory but not checks function
return. This add missing checks and proper error handle.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The current updatehub version forces user application to run in kernel
mode. This add necessary api syscalls to isolate userspace from kernel.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
A call to exit_dpd mode for the nrf QSPI nor flash should always be
made, even if the currently executing image is compiled with
CONFIG_PM_DEVICE=n, because a previously executing image could have set
the device into DPD mode, and a call to exit_dpd is required for proper
functionality. Call `exit_dpd` regardless of the setting of
CONFIG_PM_DEVICE during QSPI nor initialization.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
In case the IPv6 context pointer was not set on an interface (for
instance due to IPv6 context shortage), processing the RA message could
lead to a crash (i. e. NULL pointer dereference). Protect against this
by adding NULL pointer check, similarly to other functions in this area.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If running under Xtensa simulator, it is good to tell simulator
to stop execution once we reach double exception, as the current
double exception handler is simply an endless loop. If we turn
on tracing in the simulator, the output file would contain
an infinite iteration of this endless loop, and the simulator
needs to be stopped manually before the file size goes out of
control. So we need to tell the simulator to stop once
we reach this point instead of doing an endless loop.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for configuring power save timeout in Wi-Fi chipsets.
Changes to configure power save inactivity timer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Filtering used image_1_nonsecure as DTS node label, while correct
one is slot1_ns_partition.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
z_cpus_active count becomes incorrect when the state is
PM_STATE_RUNTIME_IDLE and CONFIG_PM_DEVICE is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add an option to build the sample with application-layer clock sync
service running in the background.
This will also add a build-check for the clock sync service in CI.
Signed-off-by: Martin Jäger <martin@libre.solar>
This service allows to synchronize the clock with the application
server.
Synchronization requests are initiated by the device in a regular
interval, configurable via Kconfig.
The implementation only supports TS003-2.0.0, as the previous revision
TS003-1.0.0 requested to temporarily disable ADR and and set nb_trans
to 1. This causes issues on the server side and is not recommended
anymore.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is a prepartion for adding actual services needed for firmware
upgrade over the air (FUOTA).
The services run in a dedicated work queue.
This commit introduces code that initializes the work queue and
provides functions to schedule uplink messages after a given timeout.
Signed-off-by: Martin Jäger <martin@libre.solar>
Previously channels could be tore down before a sequence completes,
either when using async, or when ADC_ACTION_REPEAT was specified
The teardown is now moved to after an entire context is complete
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
This optional function allows a driver to do operations
after a complete sampling sequence is completed.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
RP2040 has the Memory Protection Unit.
Zephyr generally enables it by default if it exists.
Make enabling it default also on rpi pico.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Refactor sys_clock_disable not implemented behavior.
This follows the coding guidelines
Rule A.1: Conditional Compilation:
Do not conditionally compile function declarations in header files.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add dependency on SYS_CLOCK_EXISTS to all timer configurations.
This would avoid a situation where a possible timer configuration would
be wrongfully selected but SYS_CLOCK_EXISTS is disabled.
This simplifies code that wants to check for system clock capabilities
don't have to check if the system clock exists in addition.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Pull mcuboot change which refactor sys_clock_disable to only be called
when the system clock driver supports this feature.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit introduces Volume Control Profile and
Immediate Alert Service into btp.
VCP includes:
Audio Input Control Service
Volume Control Service
Volume Offset Control Service
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
This commit changes VOCS set location behavior.
When an RFU location is written, VOCS ignores it.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Minor rework to perform the PLLI2S VCO computations in floating point as
per the original seemingly intent.
Signed-off-by: Raul Pando <raul.pando@bytegrity.co.uk>
STMF412 and STM32F413 did not support CAN bus in Zephyr yet.
This adds the device tree entries to be able to use all 2, resp.
3 CAN controllers.
Signed-off-by: Tom Stirnkorb <tom@stirnkorb.me>
Remove the vref-mv = <3300>; property for all the ADC node of
the stm32 devices as it is set by default to 3300mV by the
dts/adc/st,stm32-adc.yaml
(Except for the stm32f303 vref is 3000mV)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update the unittests for feature exchange to use the new ZTEST API
Here we only update the feature exchange procedure. The remaining
unittests will be done in a next PR
Mocks, helper routines and the Unit Under Test are splitted out as
a library instead of adding them to the file list
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Point to the modified version of hal_stm32 which allow to use
ETH HAL V2 on stm32F7.
Update zephyr driver to allow it.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Align pins that are required to be shorted for this sample on
nRF52840 DK with those used in e.g. uart driver tests.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
