When calling ull_conn_iso_cis_stop with no pending LLL events,
cis_disabled_cb may be called recursively if more than one CIS is
associated with a disconnecting ACL connection.
To prevent ticker_stop being called more than once, it shall be
registered at entry of cis_disabled_cb whether this is the last CIS.
Only then shall ticker_stop be called.
Signed-off-by: Morten Priess <mtpr@oticon.com>
CIS LLL events pending was checked incorrectly using a
mayfly incorrect set to be called from ULL LOW context,
but the actual call was from ULL HIGH context.
Beside this, the code was refactored to have file static
functions after global scope functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a typo bug where sercom5 pinctrl has pad2 and pad3
has duplicated pads for pb0/pb2 and pb1/pb3.
Per the datasheet, pb2 and pb3 should be pad0 and pad1 respectively.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
The TensorFlow Lite module makes use of the features provided by the
standard C++ library (e.g. `#include <functional>`), so the standard
C++ library config must be enabled for it.
This used to work without `CONFIG_LIB_CPLUSPLUS=y` due to the bug
described in the issue #36644.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `nostdincxx` C++ compiler property for GCC, which
is specified when the C++ standard library (`CONFIG_LIB_CPLUSPLUS`) is
disabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new C++ compiler property `nostdincxx` which
specifies the C++ compiler flag for excluding the C++ standard library
include directory from the include paths.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When CONFIG_PM_DEVICE_RUNTIME is enabled, if a pin is configure as
input after an output pin has already being configured the device is
wrongly suspended.
Fixes#38433
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that we're clearer around pm constraints management in various
TX cases (poll streams, irq driven or async), make some code
simplifications to ease readability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Introduce new logic to set/release pm_constraint during serial TX
transactions.
First change is to introduce an internal flag and utility functions
to control the set/release constraint balancing per uart device.
This way, whatever the mix of transactions or API calls, we
ensure a single uart device can only do 1 or 0 to the PM state
constraint. Constraint can't then be set more than once, released w/o
having been set or released more than it was set.
The last part of the change reworks the triggers for constraints
set/release operations.
In order not to disturb driver operations, if irq driven mode or PM is
enabled, don't enable TC interrupt handling by default.
Instead, map the pm_constraint setting to the way TC flag is handled
in normal mode of operations (irq driven or async).
As a consequence, in irq driven mode, pm_constraint is set/released on
tx_enable/tx_disable api calls, which gives API user full control
on transaction protection vs low power operations.
Finally, we emulate the same behavior on TX poll transaction, by
enabling TC irq at the start of a stream and disabling TC irq once
stream is completed. This is controlled with a dedicated device flag.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During review of #38681, switching from HAL to LL,
involuntarily enable DBGMCU clock instead of DMA clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In case LwM2M server or bootstrap server rejected
Registration/Registration Update/Deregsitration attempt, there were no
reasonable notification to the application. Fix this by reporting
LWM2M_RD_CLIENT_EVENT_*_FAILURE in such case.
Addtitionaly, remove pointless ENGINE_DEREGISTER_FAILED event, which
have no use in the state machine.
Finally, simplify the response code logging to prevent code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TWIM peripherals cannot perform write transactions from buffers
located in flash. The content of such buffers needs to be copied
to RAM before the actual transfer can be requested.
This commits adds a new property (zephyr,flash-buf-max-size) that
informs the driver how much space in RAM needs to be reserved for
such copying and adds proper handling of buffers located in flash.
This fixes an issue that caused that e.g. the DPS310 sensor driver
did not work on nRF SoCs that only have TWIM, not TWI peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Issue an error logging message when the i2c_nrfx_twim driver lacks
a concatenation buffer big enough to properly handle a call to
i2c_burst_write() function, to give the user a hint what is wrong.
Also use by default a 16-bytes long concatenation buffer for every
instance of the i2c_nrfx_twim driver. Such value should cover most
of the simple uses of the i2c_burst_write() function, like those
in the stmemsc sensor drivers, and when a longer buffer is needed,
the user will be provided with the above message pointing to the
property that should be adjusted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace the old master and slave prefixes with the new central and
peripehral ones from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the documentation for the Renesas H3ULCB board.
It document features that have been merged
during v2.7 windows and before.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
On some STM32 boards, for unclear reason,
RTT feature is working with realtime update only when
* one of the DMA is clocked
and sometimes also
* one of the DBGMCU bit STOP/STANDBY/SLEEP is set
Fixes#34324
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
It happens that CM7 wakeups CM4, before CM4 goes to sleep.
Thus when CM4 goes to sleep,
there no more wakeup from CM7. And CM4 hangs.
For a simple synchronisation implementation,
CM4 doesn't go to sleep any more,
instead it waits (active wait) for CM7 to take HSEM
(meaning that clock configuration is finished).
Fixes#38069
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
With "Incompatible (u)intptr_t type and PRIxPTR definitions",
https://github.com/zephyrproject-rtos/zephyr/issues/37718,
issue resolved the FIXME code is no longer needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
On STM32L0, there are some hardfault when DBGMCU bit Sleep, Stop
or Standby are enabled. See #37119
For unclear reason, enabling DMA clock fixes this issue.
(similarly than #38561, DMA clock comes with DBGMCU bits)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
If CYC_PER_TICK does not divide the (now - last_count) quantity exactly with integer math, the subsequent multiplication before incrementing last_count causes a drift. This commit eliminates the redundant division-followed-by-multiplication and fixes https://github.com/zephyrproject-rtos/zephyr/issues/37852
Signed-off-by: Berend Ozceri <berend@recogni.com>
This test makes use of dynamic RAM allocation done on the leftover
SRAM. Similarly to test/posix/eventfd, limit this test execution on
platforms with at least 32K of RAM available.
Fixes#38601
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
C implicit promotion rules will want to make floats into doubles very
easily. Zephyr build will generate warnings when this flag,
`-Wdouble-promotion`, is enabled with GCC
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
In k_mem_paging_eviction_select(), the returned dirty bit value
may not be actually associated with the page selected, but
rather the last page examined. So fix this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the Zephyr build system such that it does not
include the `zephyr_stdint.h`, which tries to define Zephyr's own type
system, when compiling for the native POSIX architecture.
The native POSIX architecture compiles with the host toolchain and
headers, and there can be conflicts if we arbitrarily define our own
type system (e.g. mismatch between the types and the specifiers defined
in `inttypes.h`).
Note that this is not meant to be a permanent fix; instead, it is meant
to serve as a temporary workaround until we no longer need to define
our own type system.
For more details, refer to the issue #37718.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth shell implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid hitting the following violation:
Violation to rule 5.7 (Tag name should be unique)
Replace the use of "shell" in the shell as an instance of a pointer to
const struct shell.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
