Add the QEMU x86 prj file to the MQTT publisher application.
Change-Id: I1ba8c3a3bf818d8f6dee7ea94021a83ba5277e5f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This README file is no longer needed as we have separate
README files in various sub-directories.
Change-Id: I38d1c4208e373aa7aa23373149ef1b89fbcda094
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A sample application to illustrate the usage of crypto APIs.
This shows the usage of AES - CTR, CBC and CCM based encryption
and decryption.
origin: original
Change-Id: I17e4d966a70169b71a754c9cdc3f713a5d0c3ac0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add the HTTPS (HTTP over TLS) server sample application on top
of the current HTTP Parser Library and mbedTLS. This code uses
TLS to stablish a secure connection and HTTP parser to identify
the request and the proper response.
Jira: ZEP-799
Change-Id: Ifbbcd0347bec47d12158440e50a82dc2966334d3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Added conf files for qemu_cortex_m3, until a better solution
than CONF_FILE=prj_$(BOARD).conf exists in the makefile.
Change-Id: I1edc4f37bb3c49ecb65abf7c93b3c9f4608d601e
Signed-off-by: Richard Peters <mail@richardpeters.de>
Modify the network setup routine to accept the following parameters:
- network context
- accept callback
- server IP address
- server port
This change will allow us to reuse this routine for TLS.
Change-Id: I1fdbaa908783c69f87863cbc597b42f39358762c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the QEMU prj file for the HTTP server sample
app.
Change-Id: I0b910b5ec9970a7ffe9621e19d9544d899c22132
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add information about how to run libcoap's[1] implementation of the
ETSI testcases against zoap-server.
Jira: ZEP-1538
[1] https://github.com/obgm/libcoap (branch develop)
Change-Id: I6aa5989575cc15630371aa0761bee98fb6fe1b80
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This was reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ib54d43bbfae4c7819b1e2b82d2931bfe1201ecce
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Binding of the device failed due to incorrect device name. Update
to use the correct device name.
Jira: ZEP-1704
Change-Id: I6ca23a439357592c9c974ca746bccc35e77d996d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
These were reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ic625749309773611c0c6ba2905e9420e98947dae
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Turn down the default logging verbosity on the dhcpv4 frdm_k64f config
to focus on the dhcpv4 implementation.
Change-Id: Ifb450181add653951517a7b128b11657ec2bab62
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The example entropy_source implementation should write entropy to the
output buffer rather than to the context pointer which in this example
happens to be NULL.
Take the opportunity to reorganize the entropy_source to use all of
the entropy provided by a call to sys_rand32_get() rather than just
1/4 of it.
The entropy_source() callback from mbedtls is given a maximum amount
of entropy to return, rather than a minimum amount. Hence it makes
more sense to deliver exactly one chunk (32 bits) of entropy from the
call to sys_rand32_get() per call and let the mbedtls entropy handler
worry about how much entropy we actually need to collect (ie the threshold).
Change-Id: I57ed438de5cb1223619fde0fb8039d6eca284646
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I98fabdcadfd0a4fe5ae10226dabf4e6d31e88df6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I9c303ef949f7670f2a2d9691c342e496873e96e6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Core stack is not removing the network buffer if app data length
is zero. So memory leak happening here.
Change-Id: I3d354b5e7008396ca7cb977631036871998165b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ib8e3f8b412c2f8388315c2f63cae4392f814ea2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
size_t has different types depending on the arch selected for
building. Correct format identifier is %zu in this case.
Change-Id: I4388fcd8c5eb8bcd5997bb921bd80b4c2175b24c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Fix build break introduced in commit 6b013c4721c5
("net: nbuf: Add timeout to net_buf getters")
Change-Id: Iaa521c6a49ae740eaee5276936442ab8aa4c47ba
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Set protocol family value only after the buf is verified
to be non-null.
Change-Id: I0ce7bab3539087d0f522b4bb3024f46a7eb3c15f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a basic HTTP client sample application.
The following HTTP 1.1 methods are supported: GET, HEAD,
OPTIONS and POST.
This sample application does not define an API for HTTP,
for more information see ZEP-346.
Jira: ZEP-827
Change-Id: Iee63a53f2ef424964f040eba20326d648249fc24
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The README was referring to a specific version of the boot loader.
Since the boot loader version is expected to change in future
and Zephyr code would also correspond to that version, it is better
to not mention any specific version. Instead, the requirement
is to use the latest version of the boot loader.
Change-Id: I04082eec4af16426f6456702c521e8f61bd4e0df
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add missing README.rst files to the last two samples.
Jira: ZEP-1540
Change-Id: I8dfa6489c6c65872594d4416870e2a41e701595d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the accelerometer sampling frequency for polling mode.
So, cpu has more time to fetch the sample.
Also add some waiting time for the new frequency setting to
take effect.
Jira: ZEP-1532
Change-Id: If5c1d8a2b5f30b232a212f2775306ca397b9f80c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove CONFIG_GPIO from the prj config file. It is redundant.
Change-Id: Ife4301e7ce480a9002cadcddfd5eaa569900a391
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use a static buffer for sending UDP payload instead of reading
values from memory.
Change-Id: I037db5cd9b8784966d481c36e8cbe92d19760475
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compiler was giving "Unused variables" warnings if IPv6 was
enabled and IPv4 was not, and vice versa.
Change-Id: I3b17534bb8bdef207512ea5b618e138edb420871
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address and port number were incorrectly parsed if
user used udp.upload command.
Change-Id: Ib37d481012af5e186a1e342c92d10ddef9fe35b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address family was not set correctly when setting up
the connection. This lead to connectivity error in udp.upload
command.
Change-Id: I598ff2675f97e10e2033763a497f7583c94f3840
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the HTTP server sample application on top of the
HTTP Parser Library.
This sample application is based on TCP and HTTP chunk
transfer code found at:
https://gerrit.zephyrproject.org/r/#/c/9977/
A README file with sample output and a detailed
description of this application is also provided.
Jira: ZEP-820
Jira: ZEP-1542
Jira: ZEP-1556
Change-Id: I649104a256190577000bbac118136d5bc21f83bf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This enables these samples to interoperate with Linux 6LoWPAN over
Bluetooth implementation while that is being fixed, in the long term
we might remove it from the samples once Linux is fixed.
Jira: ZEP-1656
Change-Id: I8ca9fe5a27f43cebc75b6fe5a436a5e8fcee26d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The DNS client sample application was updated to use IP addresses
from the prj_*.conf files. This patch updates the README file to
reflect those changes.
Change-Id: Ic72510be8da208aef19fb188560221e1c2386457
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
