Updates Bluetooth mesh specification references:
- Change "Profile" to "Protocol" since the main specification has
changed its name.
- Update/align formating of specification references. This will
make it easier to find spec references in the future.
- Change some section references to point to the correct section of the
newest version of the specification (v1.1).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Since notice that simultaneous advertising is not only used
by relay message, provision over pb-adv can also be used.
so it was changed to a more general name.
refs:https://github.com/zephyrproject-rtos/zephyr/pull/48903
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Adds separate extended protocol timeout of 120 sec in provisioning
implementation when OOB method Input or Output is used. This
complies with recommendation in the mesh 1.1 protocol spec (5.4.4).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Commit gets rid of host dependency to generate DH key.
Mesh uses its own function for it that has synchronous
behavior and correct endianism. It simplifies the provisioning
state machine since it doesn't require waiting for the host HCI
handler.
Also, it removes hidden cross-dependency between BLE Mesh and
SMP in the aspect of competition for the same DH key
(https://github.com/zephyrproject-rtos/zephyr/issues/23292)
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Since we enable -fshort-enums for arm-clang we get the following
warning:
subsys/bluetooth/mesh/pb_adv.c:139:40: warning: cast to smaller
integer type 'enum prov_bearer_link_status' from
'void *' [-Wvoid-pointer-to-enum-cast]
Fix this by first casting to an int to grow the size of the type.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
When building with an LLVM toolchain get the following warning:
bluetooth/mesh/pb_adv.c:774:4: error: expression which evaluates to zero
treated as a null pointer constant of type
'void *' [-Werror,-Wnon-literal-null-conversion]
PROV_BEARER_LINK_STATUS_SUCCESS);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix by adding a cast to (void *).
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Some variables shadow global, which is difficult to handle when
porting to other platforms with shadow warnings turned on.
https://github.com/zephyrproject-rtos/zephyr/pull/50581
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
It is possible to open provisioning link again after being provisioned.
Though this has no immediate consequences, the node shall not open
provisioning after being provisioned.
Reset link.cb so that any following provisioning advs are dropped.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When receiving Transaction Start PDU, assure that number of segments
needed to send a Provisioning PDU with TotalLength size is equal to SegN
value provided in the Transaction Start PDU.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
There is potential buffer overflow in pb adv.
If Transaction Continuation PDU comes before
Transaction Start PDU the last segment number is set to 0xff.
The current implementation has a strictly limited buffer size.
It is possible to receive malformed frame with wrong segment
number. All segments with number 2 and above will be stored
in the memory behind Rx buffer.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
After #35702, the provisioner is unable to mark a link as closed, as
it depends on the send_end callback to be called, so it can start its
timer. PB-Adv keeps a reference to the buffers of reliable messages,
which prevents this callback to be invoked, as the buffer destructor is
never called.
Move scheduling of the retransmit timer to the initial transmission, and
replace the timer based LINK_CLOSE message tx duration with a message
counting solution.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The send_reliable function was reused in multiple places as part of the
k_delayed_work changes for Bluetooth Mesh in #33782. This function
contains a line that resets the start timer, causing prov_retransmit to
continously move the goal post for when to give up sending.
Extract this line out of the send_reliable function, and put it along
with the other link.tx initialization in bearer_ctl_send and
prov_send_adv.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API. Consolidates reliable sending logic for the first
transmission and the retransmit into one. Adds check for link active in
protocol timeout.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Instead of silently closing the link we should send a Link Close message
three times before resetting provisioning state.
From Mesh Profile Specification v1.0.1.:
```
5.3.1.4.3 Link Close message
The Link Close message is used to close a link.
```
```
5.3.2 Link Establishment procedure
The device shall start the link timer, set to 60 seconds, when the link
is open. When the link timer expires, then the device shall close the
link.
```
```
5.3.3 Generic Provisioning behavior
If the sender does not receive a Transaction Acknowledgment message
within 30 seconds after sending the first message in a transaction,
the sender shall cancel the transaction, cancel the provisioning
process and close the link.
```
From Mesh Profile Test Specification p6:
```
MESH/PVNR/PBADV/BV-01-C
Test Procedure:
[...]
6. The IUT is induced to send a Link Close message with the Reason field
set to 0x02 to terminate the link. The message is sent at least three
times to ensure the message is received by the Lower Tester.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Adds support for extended advertiser commands in the mesh. This doubles
throughput for common packet sending, and significantly improves timing
accuracy for the Friend and Low Power features.
The proxy module's advertisement control has been moved inside the adv
module to abstract away the different advertiser modes.
The extended advertiser mode does not need an advertising thread to
operate, and ends up with a net reduction in RAM usage.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Wrong use of function `find_msb_set(~link.rx.seg)`,
uint8_t type is implicitly converted to uint32_t.
As a result, it always returns 32 instead of the
expected value, resulting in abnormal processing
of prov segment.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Reset provisioning bearers when bt_mesh_reset() is called. Accept
another provisioning attempt after link close.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This value was used quite often in the file so adding a
descriptive name should improve readability.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The comparison of a current tx link transaction id caused
us to not send ack and in effect fail provisioning.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Splits PB-ADV and PB-GATT into separate modules with a common interface
to modularize prov.c.
Additional trivial fixes from testing:
- Reduces warnings for normal occurances like repeated packets.
- Makes link ack a non-reliable packet to prevent it from being repeated
until prov invite.
- Provisioner does not send link fail, but closes the link (as per spec
section 5.4.4). This prevents lingering zombie links on both sides.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
