LWM2M Client Sample with DTLS enabled fails because TLS_HOSTNAME is set
but MBEDTLS_X509_CRT_PARSE_C is disabled which leads to error
'net_lwm2m_engine: Failed to set TLS_HOSTNAME option: 109'
Add new field hostname_verify to let the application decide if hostname
should be checked.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
If NET_IPV4 and NET_SOCKETS_PACKET is enabled, NET_SOCKADDR_MAX_SIZE will
be bigger than the ipv4 address length.
This is a problem when DTLS is used as the address comparison will fail
because of the different length of the received and the stored address.
This is also a problem if NET_IPV6 and NET_IPV4 is enabled and the remote
address is a ipv4 address
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
Sometimes message is being reset from multiple locations in code.
If message has already been reset, pointer to context is invalid.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Read operation must return empty payload when read /object_id
if there is no created object instances.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Added support for Composite observation for LwM2M v1.1.
Updated current Observation node to support linked path list.
Rename typos lwm_ to lwm2m_.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Removed to store pmin and pmax at oberservation node structure and
use attribute list store for calculate time for next Notification.
Observation class use timestamp for triggering notification based on
resource update which use pmin and default pmax behaviour.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
It depends from a content formatter is there need to put constructs
with a path level deeper than object instance. In other words with
resource- or resource-instance-level.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Makes possible to read a single resource instance at a time with
plaint text, JSON and TLV content formats.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
LwM2M version 1.1 will select SenML Json for default content format.
Version 1.0 will use TLV format.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M engine Send operation support /dp.
Send operation based on Composite Read functionality
which is not enabled at engine side like composite write.
Added Kconfig configurable for composite read path list size.
Created generic Read object instance which is shared between
general read and Composite Read operation.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M SenML JSON contain format support for Read / Write operation.
Added Kconfig configurable for enable SenML JSON format.
LwM2m read validate read operation and report out of memory.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M 1.1 allows to write attributes for resource instances as well.
Resource instance level attributes need also to be taken into
consideration when adding/updating observers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M adds Resource Instance reporting in Discovery response, along with
attributes assinged at the Resource Instance level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is a bare minimal changes to tell the server that we are using
LwM2M 1.1 version. Queue-mode parameter has changed between 1.0 and
1.1 so it must be changed in the same time.
Other 1.1 features may follow on separate commits. This is still
an experimental feature that allows developing and testing of
1.1 features.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This far time values have been synonymous to integer values. Content
formats like CBOR do use different representation.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Do not retransmit a message that just has been send successfully.
This case can in particular happen quite frequently if the modem
connection/throughput is quite bad and so there is a high latency.
A message that has to be acknowledged is scheduled for retransmission.
Before retransmission a ack for this message is received that will
cause a reset of the original message. In this case you see a
"LwM2M message is invalid" error message.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Read operation must return empty payload when read /object_id
if there is no created object instances.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
many functions in the lwm2m librarys api take a pathstr argument
that is never written to, so make it const
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Server Object SSID should only have Read access.
LightweightM2M-1.1-int-256 confirmance test validate
that write operation to SSID should return error.
Overwrite SSID affect dead block for lwm2m engine and
only reset will heal.
Fix by adding bootstrap overwrite access for Security and
Server object when bootstrap is active.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Use explicit casting to long long within `snprintk()` and logger
functions to prevent compiler warnings with different
platforms/toolchins (as 64-bit integer can be either represented
as ld or lld depending on platform).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify the restult of the content writer functions and return an error
if content writer fails to read/write field in the message.
This solves an issue when for example malformed packet was sent to the
server if the payload did not fit in the message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Validate the respective attribute parameters only if both are provided
at given level. This prevents from comparing for instance unset pmax
value (equal to 0) with some new pmin value sent by the server.
Additionally, fix the sanity check for the `pmax` value set on observer,
after fetching the attribute value at all levels (including the default
value at from the server object). Instead of using wrong max(pmin, pmax)
formula, set the pmax value only if it's a valid one (>= pmin),
otherwise ignore the value and set it to 0. This makes the notification
engine ignore the pmax value set for observation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added an observe callback so that the application can register to
receive events like observer added/deleted, and notification acked/
timed out. The notifications can be traced back to the exact data
contained within them by use of the user_data pointer.
Fixes#38531.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
net: lwm2m: When mbedtls CONFIG_MBEDTLS_SERVER_NAME_INDICATION is
enabled, a destination hostname must be passed to socket to properly
connect do lwm2m server.
Passing lwm2m context to lwm2m_parse_peerinfo
Signed-off-by: Jair Jack <jack@icatorze.com.br>
`engine_remove_observer_by_path()` was not updated during some recent
LwM2M observer changes, still using the `engine_observer_list` which got
moved into the `lwm2m_context` structure. Update the function to align
with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If a firmware update is fetched from a server, and no port number is set
in the URI (e.g. coap://example.com/fw_update), the client will try
to connect on the port specified by CONFIG_LWM2M_PEER_PORT.
If a port different from the peer port is to be used for firmware
update, this has to be set explicitly in the URI:
coap://example.com:5683/fw_update.
This fix adds CONFIG_LWM2M_FIRMWARE_PORT, which will be used when
fetching a firmware update without specifying the port number in the
URI.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
Replace the custom float32_value_t LwM2M type with native double, to
facilitate LwM2M API and improve floating point precission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Floating point parser for plain text format was parsing floats wrongly,
ignoring leading zeros after decimal points.
Fix this, by reusing atof32() function, already avaialbe in a different
part of the engine, which did the parsing correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to the specificaion, resources are not predefined to use 32 or
64 bit floating point numbers, but should rather accept any of them (as
indicated by the size of the TLV in the message). This lead to issues
for instance with Eclipse Leshan LWM2M server, where Leshan sent 64-bit
value, while Zephyr expected 32-bit, making it impossible to write
the resource.
Therefore, unify the float usage to 32-bit float representation and fix
the TLV parsing functions, to accept values sent as either 32 or 64 bit
float.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since it's not possible to encode full range of 64-bit unsigned integer,
remove this type from the LwM2M implementation, and replace its uses
with 64-bit signed integer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the resource values represented by the unsigned integers were casted
to integers of a corresponding size in the read handler, they were not
ecoded properly if the unsigned value was larger than the maximum
integer value of the corresponding size (i.e. they were encoded as
negative values).
Fix this by casting the unsinged value to a wider integer type, to
prevent incorrect interpratetion of the data provided. The TLV encoding
functions take care of the optimization (i. e. encoding integers on the
minimum number of bytes needed), so it should prevent bandwith waste if
the unsigned value would actually fit into the integer of the
corresponding size.
Similar case is for the write hander, where unsigned integers encoded at
8 bytes were not processed correctly. Fix this by using wider decoder as
well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a non-readable resource gets updated (either by the server or
with an API), it makes no sense to send a notification in such case, as
no such resources are not included in notifications anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of manually computing payload offset, let the CoAP library do
the work, and use the payload pointer returned by the
`coap_packet_get_payload()` function instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This will fix a bug caused by creating a multi instance resource with
only a single resource. Previously this was treated as a single instance
resource. This is now properly treated as a multi instance resource with
one instance
Signed-off-by: Markus Rekdal <markus.rekdal@nordicsemi.no>
Added notify_timeout_cb to struct lwm2m_ctx to allow application to
handle notify timeout
Added lwm2m_rd_client_update to lwm2m.h to allow application to
trigger registration update
Added notify_message_timeout_cb which calls notify_timeout_cb from
struct lwm2m_ctx and logs an error message
Fixes#31499
Signed-off-by: John Power <john.power@xylem.com>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
this has a number of advantages:
- allows to only create notifications for each client if there are no
messages already waiting to be send, in practice prioritizing the
memory for messages for answers, thus staying more "responsive".
- saves a fair bit of memory by eliminationg now redundant client_ctx
pointer per observer.
- fixes a potential subtle bug: previously, an observer reset would've
stopped the first observation found with a matching token, which
might've belonged to a differen client.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
This restructures the lwm2m_engine to use a non-blocking socket access
instead of the previously used blocking style, and eliminates any
socket-access from outside of the main work loop.
The main motivation behind this is an issue within nordics
nrf_modem_lib/modem-fw on nrf9160, that leads to socket send() calls to
block indefinitely when the shared memory used for
rpc-communication with the modem is already exhausted because of
incoming data.
This lead to the lwm2m_engine locking up on send calls when there is
also a large amount of incoming data.
This works around this issue, by only issuing send calls when poll
reports the socket to be ready for sending, and (more importantly) by
always receiving all buffered incoming data before sending anything.
There might still be a (perhaps academic) possibility where this
situation might be triggered, when the scheduler interrupts the lwm2m
thread in-between receiving and sending, but for now we have not yet
observed this.
Besides working around the aforementioned issue, this also simplifies
the way resends are handled as they are no longer send from the main
system-workqueue, and limits all interaction with the sockets to a
single thread.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Since the API already has a function to create an LwM2M object instance,
it makes sense to add a corresponding delete funtion, allowing the
application to delete created objects.
Additionally, for the remote delete set the Registration Update trigger
only when not in bootstrap mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Registration Update message should be sent whenever an object
instance is created or deleted. Currently this was only the case when an
object instance was created by the server and not by the application.
Fix this by triggerng the Registration Update from the API function
as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently the lwm2m_path_log_strdup allocates a temporary buffer on a
stack, and then passes it to the log_strdup function to create a copy
of the string for the logger. log_strdup however will not copy the
string if for instance immediate logging is used, therefore the logging
function will still use the memory address of the already invalid buffer
allocated within lwm2m_path_log_strdup.
Fix this by passing an addittional `buf` parameter to the
lwm2m_path_log_strdup function, therefore allowing the user to provide
the buffer within a valid scope.
CID: 220536
Fixes#34005
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Made the LwM2M engine checks for pmin and pmax optional to adhere to
the LwM2M specificattion. We now first check that pmin and pmax are
actually set. Also changed the default CONFIG values for the attributes
pmin and pmax to 0 to indicate that they are not active by default.
Fixes#34329.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
