Set the same encoding for collected CMake output and file where this
output will be saved.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
if CONFIG_LOG_TAG_MAX_LEN is 0, then a warning would be generated
on the MIN macro always being false, but as
CONFIG_LOG_TAG_MAX_LEN is a constant, then it is better to just
compile out the function if it's 0.
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Testing of IV update, IV recovery and deferring of
the IV update procedure in case of ongoing segmented
transaction.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Do not silently ignore attempts to set an unsupported mode. Return
-ENOTSUP instead.
Fixes: #44706
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Only add the filter ID offset for extended CAN-ID filters if the filter
was added successfully. Raise log level from info to warning if filter
addition failed but only log it once.
Fix bounds check for removing an extended CAN-ID filter.
Fixes: #44721
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commit a50b69dfb7 introduced a work-around
for FlexCAN errata 5461 and 5829, but neglegted to take the RX mailbox
offset into account when calculating maximum number of mailboxes
allocated for RX/TX.
Fixes: #44724
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove support for the optional API function can_get_max_filters() from
the STM32 bxCAN driver for now.
The function returns the Kconfig value for the maximum number of filters
but the true number of supported filters may be different due to the
filter nature of the STM32 bxCAN driver implementation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Support for the can_get_max_filters() API function is optional and may
not be supported by all drivers.
The check for an adequate amount of filters is just there in order to
fail early. If the driver does not support can_get_max_filters(),
reporting of a failure will be delayed until a filter addition fails.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Route printk()'s through logging subsystem. This is required
to get clean OS panics in log output. If this is not defined, e.g.
the stack backtrace is mixed with the Zephyr OS panic information.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The commit adds change to image management list where "<???>"
will be returned as version string in case when version to string
conversion fails.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The ull_to_s, which is used to covert ints to string, has been
replaced with snprintf.
Above also fixes a bug where ull_to_s has been given INT_MAX as allowed
output string, while it should be given maiximum allowed buffer size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Commit removes mgmt_streamer_reset_buf from mcumgr lib,
and supporting Zephyr function zephyr_smp_reset_buf.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
remove qemu_xtensa from exclude platforms as fix for this platform
is provided.
add ast1030_evb to exclude platforms as this soc does not yet have
in tree driver for external cache controller.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This change adds alignment to buffer on which icmsg_buf
is created. Some platforms run into fatal exception
when accessing unaligned addresses. Fix that by ensure
4 byte alignment.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Instead of resizing all devices handles, we just resize devices that are
power domains. This means that a power domain has to be declared as
compatbile with "power-domain" in device tree node.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a new flag that is used to tell whether or not a device is a power
domain. In order to a device be identified as a power domain the node
has to be compatible with "power-domain".
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add API to add devices to a power domain in runtime. The number of
devices that can be added is defined in build time.
The script gen_handles.py will check the number defined in
`CONFIG_PM_DEVICE_POWER_DOMAIN_DYNAMIC` to resize the handles vector,
adding empty slots in the supported sector to be used later.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This PR allows the user to add symbols to the ramfunc
section. The use for this could be as follows:
zephyr_linker_sources_ifdef(CONFIG_ARCH_HAS_RAMFUNC_SUPPORT
RAMFUNC_SECTION
quick_access_code.ld
)
quick_access_code.ld (as shown below) can define additional
symbols to go into the ramfunc section
. = ALIGN(4);
KEEP(*(CodeQuickAccess))
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When "eager FPU sharing" mode is enabled, FPU registers must be
initialised at the time of thread creation because the floating-point
context is always active and no further FPU initialisation is performed
later.
Note that, in case of the "lazy FPU sharing" mode, floating-point
context is inactive by default and the FPU is initialised when the
first floating-point instruction is executed.
Refer to the issue #44902 for more details.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds hda link in and out drivers. The link in and link
out channels of HDA have small differences
with the host channels. Updates the existing
cavs_hda drivers and code to account for these
differences.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
all the consumers of the obsolete pinmux driver is
updated to use pinctrl API, this commit removes
the pinmux driver and assosciated sections.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
This commit has the necessary changes to update the consumers
of pinmux driver(SPI, I2C, UART) and update the board specific
files to use the pinctrl interface.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
Add pinctrl driver for CC13XX/CC26XX family of SoCs
to facilitate transition from pinmux to pinctrl.
`IOCPortConfigureSet()` from TI hal driverlib used to
implement the generic pinctrl driver.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
Fix a variable declaration type conflict:
libc-hooks.c:92:16: error: conflicting types for '_heap_sentry'
92 | extern void *_heap_sentry;
soc.h:78:13: note: previous declaration of '_heap_sentry' was here
Fixes#44926
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add initial build rules for CHRE. This change includes a Kconfig and
CMakeLists.txt to begin compiling code from the CHRE module.
Additional files are included to bridge the APIs from CHRE's to
Zephyr's. These can be found in modules/chre/include and
modules/chre/src.
Additionally, add a sample to make sure that the module builds. It can
be built via:
```
$ west build -b native_posix -p=always samples/application_development/chre
```
Signed-off-by: Yuval Peress <peress@google.com>
Both the `_cpu_arch` and `k_thread_runtime_stats` structs can have a
size of 0 in C, but will fail when building with C++. Add an extra
byte in those cases.
Signed-off-by: Yuval Peress <peress@google.com>
