Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the shell commands related to Advertising Extensions
to call the LE Set Extended Advertising Data command
functional interface for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Initialize LittleFS at POST_KERNEL and not at APPLICATION stage.
When using LittleFS as settings backend for OpenThread, LittleFS needs
to be available when net_init is performed.
Arguably, FS is an OS kernel component that should be ready when
applications are starting.
Possibly, the same change should be applied to FAT fs as well.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Port advanced scheduling implementation from legacy
controller.
This implementation schedules
- non-overlapping scan window when there are simulataneous
central connections active
- central connection establishment with similar connection
intervals be placed in a non-overlapping group, temporally
- connection parameter request with calculated window offset
hints to have non-overlapping BLE radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It add an option to configure openthread thread priority class
by the application if there is a such need.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Net pkt is added into the ot net list after queued net pkt into
the net_rx which bases on it. It affects in losting net pkt when for
instance ot thread is preemptive.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The eth_stats_update_errors_rx() implicitly assumes that passed pointer
to struct net_if is not NULL.
This is not true for MCUX's eth_rx() (in eth_mcux.c), where we can
execute eth_stats_update_errors_rx() after net_recv_data() returning
-EINVAL because of passed NULL iface pointer.
This change fixes this problem with adding extra check on iface not
being NULL before it is dereferenced.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
The current code truncates the size_t block size to a u8_t, which
causes a 256 or 512 byte block size to be truncated to zero and
passing the size check.
Check as a size_t then truncate once the check passes.
Signed-off-by: Michael Hope <mlhx@google.com>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
