New API for enable Historical data storage for LwM2M resource.
Data cache is only supported at resource which resource size is
static and well known.
Extend output writer for write cached data timestamp.
Enable cache support for Resource set and Read operation.
Added possibility for for drop latest or oldest data from cache.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
New API for suspend and resume LwM2M engine.
New event LWM2M_RD_CLIENT_EVENT_ENGINE_SUSPENDED for indicate
application that engine is suspended.
Simplify stack suspend and resume state same time for queue mode.
New CONFIG_LWM2M_RD_CLIENT_SUSPEND_SOCKET_AT_IDLE for enable skip socket
close at RX_OFF_IDDLE state that socket is only suspended and close is
called only when connection is resumed.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Created the variable CONFIG_LWM2M_SERVER_DEFAULT_SSID to be
the default ssid when not using bootstrap. Needed for access control.
Signed-off-by: Ola Tangen Kulseng <ola.kulseng@nordicsemi.no>
Implementation of the access control object. Core object (obj_id 2).
If used without bootstrap, the default value in
CONFIG_LWM2M_SERVER_DEFAULT_SSID will be used as access control owner.
Enable/disable ac control with CONFIG_LWM2M_ACCESS_CONTROL_ENABLE.
Signed-off-by: Ola Tangen Kulseng <ola.kulseng@nordicsemi.no>
Removed auto select from LWM2M_DTLS_SUPPORT
* TLS_CREDENTIALS
* NET_SOCKETS_SOCKOPT_TLS
* NET_SOCKETS_ENABLE_DTLS
LwM2M stack shouldn't enforce these options as they
are not needed with socket offloading.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Lifetimes are really 32 bit values, so the limitation
did not make sense, and it did not allow 24 hour lifetime.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Integrated updated JSON library to LwM2M 1.0 JSON.
Removed Old Json format default choice.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Integrated updated JSON library to SenML-JSON.
This integrate affect that Coap Block wise transfer is not
supported.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Enabled DTLS session cache for support session resume.
Fixed LwM2M queue mode for close connection and reconnect automatically.
Re-connect will do Registration update before it send queued data.
Session resume is helping a case when NAT change address and cause less
network traffic.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
First available subcommand is for doing a send operation. Send operation
is supported by the LwM2M version 1.1.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LwM2M engine Send operation support /dp.
Send operation based on Composite Read functionality
which is not enabled at engine side like composite write.
Added Kconfig configurable for composite read path list size.
Created generic Read object instance which is shared between
general read and Composite Read operation.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M SenML JSON contain format support for Read / Write operation.
Added Kconfig configurable for enable SenML JSON format.
LwM2m read validate read operation and report out of memory.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
This is a bare minimal changes to tell the server that we are using
LwM2M 1.1 version. Queue-mode parameter has changed between 1.0 and
1.1 so it must be changed in the same time.
Other 1.1 features may follow on separate commits. This is still
an experimental feature that allows developing and testing of
1.1 features.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Added support for Portfolio object support because LwM2M v1.1 conformance
test requirement that. This object is only for conformance test purposing.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Add support for the gateway object [EXPERIMENTAL] used by the
MG100, BT510, and BT610 LwM2M demo.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This is a proof-of-concept implementation.
A device might have multiple firmware images which needs to be updated
separately. For example a single device might have
* A bootloader image
* An application image
* External firmware image
Instead of pushing all these updates through the object instance 0 -
/5/0 - here a split to multiple has been made possible.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Update the connectivity monitor object to version 1.2.
OMA core specification for the object adds 2 optional
resources.
Signed-off-by: Jarno Lamsa <jarno.lamsa@nordicsemi.no>
Adds support for LWM2M object 9 Software management.
This is implemented according to this release:
http://openmobilealliance.org/release/LWM2M_SWMGMT/V1_0_1-20200616-A/
Note that the XML is lacking some resources and for that reason those
resources are not included. This is a known problem by OMA and will be
fixed in a later releases.
This uses the lwm2m_pull_context to pull binaries in case
FIRMWARE_PULL_SUPPORT is enabled
Signed-off-by: Michal Ciesielski <michal.m.ciesielski@voiapp.io>
Added Kconfig configurable choise option for enable Server
object version 1.0 or 1.1.
Server Object v1.1 enable by default server initiated bootstrap
trigger when CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP is enabled.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
If a firmware update is fetched from a server, and no port number is set
in the URI (e.g. coap://example.com/fw_update), the client will try
to connect on the port specified by CONFIG_LWM2M_PEER_PORT.
If a port different from the peer port is to be used for firmware
update, this has to be set explicitly in the URI:
coap://example.com:5683/fw_update.
This fix adds CONFIG_LWM2M_FIRMWARE_PORT, which will be used when
fetching a firmware update without specifying the port number in the
URI.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
If blockwise transfer is not in use it must be possible to send bigger
CoAP messages than what is the block size used with blockwise transfers.
To compensate for the increased memory usage number of in-flight packets
allowed could be decreased.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
...range for LWM2M_COAP_BLOCK_SIZE.
The range has been set to start from 64 bytes and now the help text has
been brought up to date.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Made the LwM2M engine checks for pmin and pmax optional to adhere to
the LwM2M specificattion. We now first check that pmin and pmax are
actually set. Also changed the default CONFIG values for the attributes
pmin and pmax to 0 to indicate that they are not active by default.
Fixes#34329.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
The specification states that the server can cancel observations "at any
moment, by sendinga GET request with Observe option=1, the LwM2M Server
cancancel an “Observe”operation on a specified Resource, or specified
Object Instance(s)."
It does not mention any token matching requirement, but RFC 7641 does.
The correct interpretation is not obvious. The EMQx LwM2M implementation
uses a new token for instance, which does not work with Zephyrs token
matching cancel-observe.
This commit introduces cancel-observe via path matching as a Kconfig
option. This could hypothetically introduce problems when we are
connected to multiple peers simultaneously, but since that is not likely
to be supported for a long time (if ever), this change should be fairly
uncontroversial since path matching is only used as a fallback.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Add option to disable validation callback support by setting the
validation buffer size to 0, which allows to save some memory in case
it's not needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a data validation callback to the resource structure, which can be
registered by an application. It allows to verify the data before
actually modifying the resource data.
If the callback is registered for a resource, the data is decoded into a
temporary buffer first, and only copied into the actual resource buffer
if the validation is successfull. If no validation is required (and thus
no callback registered) the resource value is decoded directly into the
resource buffer, as it used to be.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig option to enable Queue Mode binding. With this option
enabled, the LWM2M client will register with `UQ` binding, instead of
`U`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
