Added automatic runtime calculation of Forced MD bit count
based on incoming Tx buffer throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix premature connection event close due to the new Tx
buffers not being de-multiplexed and routed to connection's
Lower Link Layer context when they arrive while being
inside the connection's radio event.
Also, fix master prepare to demux and enqueue two Tx buffers
so that MD bit can be set correctly.
Relates to #27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ull_conn_tx_ack function as it no longer needs to
return the connection context back to caller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for handling REJECT_IND PDU received for PHY Update,
Connection Parameter Request and Data Length Update control
procedures.
If a link layer control procedure collision occurs, example
with local initiated PHY Update Procedure, and peer sends a
REJECT_IND PDU, then the PHY Update Procedure is stalled.
Fixes#28282.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Return BT_HCI_ERR_INVALID_CONN_ID if an invalid handle is
given by the HCI; currently sometimes BT_HCI_ERR_CMD_DISALLOWED
is returned
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Updated implementation to have consistent initialization of
ret_cb use when passing it to ticker function calls.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add explicit opcode check when handling received unknown
response PDU.
Without this, for example, an in progress Data Length Update
procedure state was reset when receiving an unknown response
to slave initiated feature request.
Fixes#26252.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the NRF RNG entropy device as the entropy device for bt_rand and
controller internal functions when LLL is Nordic.
Using an entropy source with a significant increase in stack usage
will invalidate all stack size configurations in the system and lead
to stack overflow issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing feature exchange procedure does not give the proper
response as specified in the BT core spec 5.0.
The old behaviour is that the feature-response returns the logical and
of the features for both peers.
The behaviour implemented here is that the feature-response returns the
featureset of the peer, except for octet 0 which is the logical and of
the supported features.
Tested by using the bt shell, and having different featuresets
on the 2 peers.
This fixes#25483
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A bug in the PKT_US resulted in wrong calculations for the 2M phy.
Fixes the bug, verified on EBQ.
Also adds some defines for improved readability.
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix response to unexpected LL_FEATURE_RSP for the case that
BT_CTLR_SLAVE_FEAT_REQ is disabled. Fixes LL/PAC/SLA/BV-01 for such a
configuration.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Update LLCP handling during PHY update and Data Length update to not
start the LL control procedure if the remote has already indicated that
the procedure is not supported.
This fulfills the following requirement from the BT Core Specification
(Core_v5.2, Vol 6, Part B, Section 4.6):
Except where explicitly stated elsewhere in this specification, if the
peer Link Layer has indicated either during a feature exchange procedure
or by responding with an LL_UNKNOWN_RSP PDU that it does not support a
procedure, then the Link Layer shall not use that procedure.
Re-use the connection parameter request handling for PHY and
data length update procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix EBQ tests for the Max Tx Time and Max Rx Time parameter.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Bluetooth: controller: split: fixed for endianness
Added conversion to correct endianness
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Data transmission was paused when PHY update request control
PDU was enqueued in ULL. If there was pending data PDU in
ULL that was not enqueued towards LLL, this caused
transmission to stall.
Move the tx pause due to PHY update request/response being
enqueued to pre_tx_ack callback, this way all pending PDUs
in ULL is enqueued to LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Some compilers can't resolve the conditional if/else/else construction
in ull_conn event_len_prep function, and fail with an 'uninitialized
variables' error. The change has no functional impact.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Since a peer MIC failure closes the event, it does not allow a terminate
acknowledge. For that reason a peer MIC fail for central role must force
a conn_cleanup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This fixes the EBQ tests 129 and 130. These tests check behaviour for
the DLE procedure when Encoded PHY or 2M PHY are not supported.
See also BT core spec. Version 5.1, Vol6, Part B, Section 5.1.9
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Updated the lll_conn_flush interface to pass the connection
handle while the LLL connection context stored handle has
been invalidated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the event_len_prep routine to increase readability without
affecting code size
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
There is an obscure bug in the case that CFG_BT_CTLR_PHY is not defined;
when a feature-exchange already has happened the lr->max_tx_time and
lr->max_rx_time are not calculated.
This bug is fixed by this commit.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Fixes#21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation for the missing reset of version
information procedure request state value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move invalidation of connection handle when flushing TX buffers into
LLL context. Otherwise, LLL may or may not see invalidated handle
depending on mayfly scheduling.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
If LL Connection Parameter Request or LL Connection Update
or LL PHY Update procedure is started by the local device
while a LL Length Update Request PDU has been sent by peer
then a Rx node has been stored in the llcp_rx place holder
for generation of Length Update procedure complete.
The failing assert check is incorrect in the above scenario
hence remove. Instead a missing append of the allocated Rx
node to the llcp_rx list has been added to the controller
implementation.
This issue relates to commit d12c53f89f ("Bluetooth:
controller: split: Fix missing data len update event").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Relates to commit 9c14567ce2 ("Bluetooth: controller: Fix
conn update to be cacheable").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Relates to commit fca32e41e6 ("Bluetooth: controller: Fix
DLE for remote unsupported Coded PHY").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
