When we build tests/kernel/common/kernel.common.misra on
bl654_usb we get the following error:
subsys/usb/usb_descriptor.c:313:2: error: ISO C90 forbids array
'hwid' whose size cannot be evaluated [-Werror=vla]
Fix by removing use of usblen variable in array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code was wrongly calling DMA_Abort on a channel
that not initialized. This fixes Issue#38078
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Compatible "soc-nv-flash" was removed as part as #38077,
while it should have been kept, similarly to what was done
on other SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On native_posix_64 we get the following compile error in CI:
error: format %u expects argument of type unsigned int
Fix by using %zu instead of %u as type is of size_t.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PR #37938 aligns many linker symbols name like rom/rodata_regions ...,
but ae350 soc linker script doesn't update for that. Migrate all linker
symbols name to PR #37938 changes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow application control for starting modem driver.
This allows network attach to be randomized.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When run by a makefile twister might fail to decode the text results of
commands, based upon the environment settings of the system. With this
change escape characters are removed before the string is passed to the
json decoder.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove littlefs dependency as FS backend works with any file system as
long as it is (manually or automatically) mounted.
Fixes#36851
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Fix null pointer deferencing in Periodic Synchronization
when ULL execution context could not assign an auxiliary
context when in LLL scheduling to receive chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix null pointer dereferencing in Extended Scanning when
there are more peer devices than the allocated auxiliary
contexts.
When LLL scheduling does not get an auxiliary context
assigned in the ULL execution context, then further chain
reception is aborted, access to `lll->lll_aux` which is
NULL causes null pointer dereferencing in
`ull_scan_aux_release`.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Initiating a connection, release auxiliary
context memory referenced by the lll_aux pointer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Periodic Advertising Synchronization's drift
compensation to save radio ready and address capture on
AUX_SYNC_IND reception, restore and apply at the end of
reception of all AUX_CHAIN_IND PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of checking `if (iso == NULL)` it simply checked
`if (iso)` which is the opposite of what it should have done.
This completely blocks iso from connecting channels.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So fare flash simulator had been forced to use the statistic
subsystem.
This patch introduces CONFIG_FLASH_SIMULATOR_STATS which allow to select
whether the statistic is involved in flash_simulator operations.
This patch allows to reduce flash footprint when the statistic is
not required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For getting the address of the RAM region in the application we need to
extend the api for the flash_simulator.
This path introduce flash_simulator_get_memory() call which allow to
do so.
Signed-off-by: Sigvart Hovland <sigvart.m@gmail.com>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
cdc_acm_irq_tx_ready was not checking if its interrupt was enabled.
This causes spurious tx irq handler calls.
Signed-off-by: Eric Johnson <eric@liveathos.com>
Fixes the issue where uart_sam0_irq_tx_ready would return true if
the INTFLAG was set even though the INTSET bit for the given
interrupt was not enabled yet through uart_sam0_irq_tx_enable.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Create a board overlay file in the application directory to add
pwm-led0 entry over default device tree. Also, include instruction
in the README file that connection of external LED at pin PA8 is
required for the demo to work.
Signed-off-by: Waqas Mazhar <waqas.mazhar@planetinnovation.com.au>
Node names are subject to the rules in table 2.1 of the devicetree
specification v0.3, while properties are subject to rules in table
2.2. These rules mean that some property names are invalid node names.
However, the same regular expression is being used to validate the
names of nodes and properties in dtlib. This leads to invalid node
names being allowed to pass. Fix this issue by moving the node name
handling code to the Node constructor and checking against the
characters in table 2.1.
The test cases claim that the existing behavior matches dtc. I can't
reproduce that. I get errors when I use invalid characters (like "?")
in a node name. For example:
foo.dts:3.8-11: ERROR (node_name_chars): /node?: Bad character '?' in
node name
Try to make the dtlib error message reminiscent of that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is unused since the very beginning of the module's introduction.
It looks like it was abandoned in favor of the approach where each
token can have only one capturing group.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For low power operation, set the IP connection reconfig
flag when receiving a startup report.
This will ensure the GPRS connection is reconfigured
before any socket operations take place.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
We get build issues due to the removal of the Kconfig symbol
CONFIG_UART_SHELL_ON_DEV_NAME on platforms that didn't have a uart
set as we'd get a default value for those platforms. Update the
Kconfig logic to only enable SHELL_BACKEND_SERIAL if we have
zephyr,shell-uart specified in the devicetree to address the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
