Adds an optional callback which can be used to append custom
fields to the image slot state command response
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
`OTS_CLIENT=y` and `OTS=n` is a valid config.
Since the logs weren't conditionally included, this flew under the radar
for a while.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Having all the configs be visible by default clutters the menuconfig
view. Make them visible only when the corresponding subsys or module is
enabled.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add macros for converting between Max Packet Size and total payload
length. Allow drivers specify whether endpoint supports high-bandwidth
interrupt and high-bandwidth isochronous transfers.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use COND_CODE_1() instead of UTIL_AND() to make it possible to only
define the HID_MPS_LESS_65_ macros up to value 64.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
wMaxPacketSize in endpoint descriptor is stored in little-endian order,
but the mps parameter passed to functions is in host order.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This adds a kconfig option to force
tx blocking on serial. This way only rx
will use the interrupt.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
CONFIG_BT_CONN_TX_USER_DATA_SIZE is now used for callbacks in the host.
We don't want to limit ourselves to that, so change the wording to be
more generic.
In the future, the plan is to not use user_data at all, removing the
need for the kconfig altogether.
Also rename the structure that was referenced in the docstring.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Power off the SD card in `DISK_IOCTL_CTRL_DEINIT`, instead of only
waiting for the card to be idle then doing nothing. This is a safer
state for `DISK_IOCTL_CTRL_DEINIT`, which is documented as preparing the
disk to be removed from the system. It also has the advantage of
lowering power consumption while de-initialized.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit ensures that the state of the address can be changed from
the Deprecated state to the Preferred state.
Additionally, an issue with improper memory comparison size for the mesh
local prefix has been fixed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
Added the battery level status char to bas service
as per bas_1.1 spec. Added BSIM test for BAS service
to test the NTF/INDs of BAS characteristics.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
dhcv4 server was not providing the dns server details to the
client because dns option was handled. Added the dns server
option to be send to the client as response form dhcpv4 server
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
To make the scanner module more understandable and more streamlined, I
reworked the update mechanism of the scanner. The scanner tracks now the
parameters that were used to enable it and the reason why it is running.
This facilitates state logic and allows other modules to "start the
scanner", altough it is already running.
This is mostly a refactoring and not a functional change.
Added a test to verify the behavior.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
add to task
The MBT server, as the MBT client currently sets the maximum chunk size
according to maximum supported segments in the accesss layer. This might
be suboptimal for some use cases.
The added Kconfig options give customers the option to fine tune it
themselves.
Future work will include addition of an API for the customer to modify
it also during runtime.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Check if the frame is within the text address before saving
into the buffer, this eliminates the extra, uninitialized frame
at the end of the unwind.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Relocate stack unwind backends from `arch/` to perf's
`backends/` folder, just like logging/shell/..
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The timer & dwork can be statically initialized,
SYS_INIT is not strictly required.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently, the timer is stopped:
- in the timer handler, when the buffer is full, or
- in work handler, when time's up
In any cases, the work handler is bounded to run to print
the message, so we can kill the timer there instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added:
- `clear` to discard the buffer without printing
- `info` to print info about the buffer and if the
profiler is running
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
"Perf is already running" works for `record` but is a little
strange when doing `printbuf`, so remove the "already" to
make it more universal.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `buf_full` flag is set when it is full, but dumping the
buf currently only resets the `idx`, this means that the perf
command only works when the buffer hasn't been full before.
Reset the flag when we clear the buffer.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`PERF_EVENT_TRACING_BUF_OVERFLOW` isn't used, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`cmd_perf` isn't doing anything meaningful, remove it so that
the help message will be printed when invoked. Updated
the help message of the main command.
```
uart:~$ perf
perf - Lightweight profiler
Subcommands:
record : Start recording for <duration> ms on <frequency> Hz
Usage: record <duration> <frequency>
printbuf : Print the perf buffer
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
static perf_data is zero-initialized by default, there's no
need to explicitly set `idx` to `0`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This assert cannot be turned on, as `pdu` will be NULL sometimes. This
is okay, it just means that the current channel doesn't have anything to
send and that we should probably try another one.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adds commands for triggering conn_mgr functions and
tweaking conn_mgr connectivity flags.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
TX time tracing tells how long it took from network packet
creation to when the stack got rid of it.
So the network stack allocates net packet, this is the
start time. The end time is when the packet is fully processed (sent)
by the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
RX time tracing tells how long it took from network packet
creation to when the stack got rid of it.
So the network device driver allocates net packet, this is the
start time. The end time is when the packet is fully processed.
Currently the limitation is that the RX time duration is used
for network packets that are tied to an open socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When user_data is not zeroed-out, the API returns an error. Downgrade
the API error to a warning log instead.
Introducing this check (#76489) broke a few PTS tests, as user_data is
not initialized by `net_buf_alloc()`. Doing so is in discussion:
https://github.com/zephyrproject-rtos/zephyr/issues/77088
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
For two reasons:
- prevent exposing the previous user's info to the new user
- make NULL checks on user_data work
Since we don't really have a field that specifies what part of the
user_data array is valid, we have to rely on other checks.
Such a check, if user_data contains a callback, is comparing against
NULL before calling said callback.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Path loss monitoring does not work without LE Power Control
also enabled in the controller, so update the dependencies
in the kconfigs so path loss monitoring selects power
control.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
callback_list was renamed to conn_cbs in commit 3eb975d.
However plm callback was missed due to it not being built
anywhere.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Transmit/write buffers are expected to be constant values given to the
operation to transmit but not mutate. Seperate the OP_TX and OP_RX
operation description unions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
