This is needed when a board needs to be reset using an external commands
or tools that are not part of the flash command. For example, power
reset or by poking a GPIO header on the board using external wiring.
add post_flash/pre_flash to the platform section in the hardware map.
For example:
- available: true
connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: reel_board
post_script: /tmp/post_flash.sh
pre_script: /tmp/pre_flash.sh
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/ttyACM11
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is supported to have a zephyr module that does not have a
module.yml, but zephyr_module.py does not support it and will drop
such modules.
To fix this we add support in zephyr_module.py.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We have an open request to make the help for the -t option a little
easier. Try to do that without adding too much length to the short
help.
Fixes: #16202
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For the following devicetree, view 'nested' as being on the bus.
Previously, only 'node' was considered to be on the bus.
some-bus {
compatible = "foo,bus-controller";
node {
nested {
compatible = "foo,device-on-bus";
};
};
};
In practice, this means that a 'bus:' key in the binding for
'foo,bus-controller' will now get matched up to an 'on-bus:' key in the
binding for 'foo,device-on-bus'.
Change the meaning of Node.bus and add two new attributes Node.on_bus
and Node.bus_node, with these meanings:
Node.bus:
The bus type (as a string) if the node is a bus controller, and
None otherwise
Node.on_bus:
The bus type (as a string) if the node appears on a bus, and None
otherwise. The bus type is determined from the closest parent
that's a bus controller.
Node.bus_node:
The node for the bus controller if the node appears on a bus, and
None otherwise
It's a bit redundant to have both Node.bus_node and Node.on_bus, since
Node.on_bus is the same as Node.bus_node.bus, but Node.on_bus is pretty
handy to save some None checks.
Also update gen_defines.py to use Node.on_bus and Node.bus_node instead
of Node.parent wherever the code deals with buses.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I keep mixing these up, so that's probably a sign that the names are
bad. The root of the problem is that "parent-bus" can be read as both
"this is the parent bus" and as "the parent bus is this".
Use 'bus:' for the bus "provider" and 'on-bus:' for nodes on the bus
instead, which is less confusing.
Support the old keys for backwards compatibility, along with a
deprecation warning.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a static method for dumping hardware map and reuse it across the
script reducing duplicated code.
Fixes#21475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
wdt_install_timeout() was skipped as it installs an ISR-context
callback handler function. The rest are simple wrappers.
Added myself as the maintainer of the syscall handlers. WDT
subsystem appears to not currently have an owner.
Fixes: #21432
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added support of the Microchip with FTDI serial devices to be able
create a hardware map for them. In the future that hardware map
for the Microchip board will let run automatic Sanitycheck tests on it.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Most bindings look something like this:
title: Foo
description: This binding provides a base representation of Foo
That kind of description doesn't add any useful information, as it's
just the title along with some copy-pasted text. I'm not sure what "base
representation" was supposed to mean originally either.
Many bindings also put something that's closer to a description in the
title, because it's not clear what's expected or how the title is used.
In reality, the title isn't used anywhere. 'description:' on the other
hand shows up as a comment in the generated header.
Deprecate 'title:' and generate a long informative warning if it shows
up in a binding.
Next commits will clean up the 'description:' strings (bringing them
closer to 'title:' in most cases) and remove 'title:' from all bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
timeouts were not reported correctly and we were getting the default
'N/A' in case of a timeout.
Fixes#21438
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When testing with one device and without a hardware map, make sure we
load the temporary map into the suite.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
More changes moving away from using global options and instead using
class variables and parameters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This function is not used anywhere else now that we use logging module,
so push this into the class where it is being used.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The use of a global options variable is making it very difficult to
create a testsuite for this script, so reduce and push options into
arguments instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Drop custom output functions and use logging mode for almost all
reporting. Also log everything into sanitycheck.log so detailed run
information can be inspected later, even if we did not run with
--verbose mode on the console.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Stop using global options and instead use propagated variable.
This is to make testing of sanitycheck easier.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
tabulate: Needed to show list of devices in a well formatted table.
anytree: needed to list testsuite in a tree form.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When something goes bad during the flashing process set the reason
correctly and put the error messages from the flasher into device.log
and display the location of that file instead of an empty handler.log
right now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all hardware map generation/usage to a seperate class. This will
make it easier to extend the supported hardware in the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If modules announce they have tests, run sanitycheck on those modules.
This will run on first matrix node and as the last step after running
regular testsuite.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Generate options for sanitycheck to run tests and samples in modules.
Use the --sanitycheck-out <file> to generate a file that can be supplied
to sanitycheck on the commandline which will add additional testroots
and boards if the module does contain out of tree boards.
the module.yaml file now accepts the following:
samples:
- path/to/samples
tests:
- path/to/tests
boards:
- path/to/boards
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now using only Path and PurePath in zephyr_modules.py to handle module
processing.
This make the code cleaner as well as remove an issue where a module
name would become an empty string when module path contained trailing
path separators.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We need a format code for struct packing that fits in
a pointer value, "I" is fixed at 32-bit.
The conversion of string to pointer value now prints
8 bytes. This works for 32-bit since the leading
4 digits are always zero.
The replaced length check uses sizeof(void *) and not 4.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It appears that ninja 1.6.0 or greater don't seem to send SIGTERM down
to the child processes and thus we don't terminate correctly. This
causes a hang with renode simulations.
Change terminate call to 'self.try_kill_process_by_pid()' when test
state is updated (i.e. done running with either passed or failed), in
order to explicitly send a SIGTERM to the simulator process before
sending a SIGTERM to ninja.
Refactor the terminate code so we encapsulate the behavior in one place
for a BinaryHandler.
Based on change from Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A property may be optional with a default in a base yaml, then
overridden to be required in a subordinate file. Don't prevent this
by complaining about having a default on a required property.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
export compile commands when running with --cmake-only, this can be used
for analysis and coverage statistics.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fetch HW models from a new west module.
And, remove all pre-west glue which was used to:
* Fetch them in CI
* Validate their vesion
* Modify the include path and link to them
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This option, if set, will add arguments to CMake whenever a new build
system is being generated.
It doesn't affect other invocations of CMake, such as when cmake(1) is
run in build tool mode to actually compile the application.
See the documentation changes for details.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The ARM Generic Interrupt Controller (GIC) supports multiple interrupt
types whose linear IRQ numbers are offset by a type-specific base
number.
This commit adds a function to automatically fix up ARM GIC interrupts
in order to output a linear IRQ number that is offset by the interrupt
type-specific base number.
For more details, refer to the issue #19860.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
